CEN/TC 183 - Waste management

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

This document defines terms that are commonly used in the area of waste collection and transportation management. It aims to align with terminology used internationally.

This document applies to mobile non-sewer-connected toilet cabins system.
It specifies the requirements for services related to the provision of toilet cabins and the relevant requirements for toilet cabins and sanitary products, taking into account comfort, hygiene, health and safety.
It specifies the minimum quality requirements for toilet cabins and sanitary products, as well as the extent of on-site service and the required disinfection and the number of toilet cabins to be provided. It also determines the frequency of use, the maximum number of uses per toilet cabins, the locations and the intervals for on-site service or disposal of faecal water.
This document is applicable to the framework of activities carried out in the following sectors:
—   construction and extractive industries, opencast or underground;
—   public events and recreational activities, festivals and concerts;
—   agriculture, labour camps and temporary work camps;
—   beaches;
—   emergencies;
—   military tactical and training exercises.
There are other types of mobile toilet cabins which are not connected to a sewage system (e.g. dry toilets, composting toilets, incinerations toilets, vacuum toilets, or other technologies and processes) and which are not covered by this document.
This document establishes a system to ensure that mobile sanitation facilities for waste disposal are available not only in the workplaces but wherever there are no waste disposal systems connected to a sewerage network.
This document is directed at manufacturers, services providers' companies and publics or private cabin hirers of toilet cabins not connected to a sewage network.

This document provides all of the information required in order to perform efficiently, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The document ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values.
This document specifies the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501:2021 series.
This document applies to machines which are manufactured after the date of approval of this document by CEN.
Noise emissions of mobile waste and recycling containers are excluded.

This document defines the standard for exchanging stationary waste collection container information between the collection container system and the back-office systems.
This document defines the way to exchange data between the "Communication Management System" of the collection container and the "Back-Office Systems".
The exchange of data between the "Collection Container Systems" and the "Communication Management Systems" or the "Back-Office Systems" is excluded.
This document targets two streams of information in the waste processing industry:
-   The processing of transactions and system information for the deposit of waste from the communication management systems to the back office systems.
-   The processing of authorization and configuration information from the back-office systems to the communication management systems.

This document applies to a front loaded refuse collection vehicle (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its intended function and can be operated, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
This document describes and defines the safety requirements of the front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in EN 1501 5:2021.
Safety requirements for loader cranes are defined in EN 12999:2020. Additional specific requirements to loader cranes installed on RCVs are defined in EN 1501 5:2021.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below −20 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

This document deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated refuse containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer throughout their foreseeable lifetime as defined in Clause 4.
This document is applicable to the design and construction of the refuse container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This document describes and gives the safety requirements of the lifting devices for emptying refuse containers and their interfaces with the corresponding parts of the RCVs and will be used in conjunction with EN 1501 1:2021 for the rear, side and front loaded RCVs. It refers to EN 1501 4:2007 for the noise test code.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   temperatures below −20 °C and above +40 °C;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   lifting and transportation of persons;
-   emptying refuse containers other than those manufactured according to EN 840:2020 (all parts), EN 12574:2017 (all parts), EN 13071:2019 (all parts), and those described as paladin, diamond, skip containers;
-   loading bulky refuse by means of platform or forks;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships;
-   fitting and operation on stationary compactors.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.

This document applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This document describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5. Safety requirements for loader cranes are defined in EN 12999.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below -25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

This document applies to side loaded refuse collection vehicle (RCV), as defined in prEN 1501-1.
This document deals with all significant hazards, hazardous situations and events relevant to the side loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the side loaded RCV so as to ensure that it is fit for its intended function and can be operated, moved, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the side loaded RCV.
This document describes and defines the safety requirements of side loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s) including the loader cranes and the interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE   The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3.

2020-10-21 - TC - Addition of figure designations "A" and "B" in Figure 2

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste and recycling containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.

This European Standard specifies the requirements for the container lifting connections to be used during the loading and unloading operations of the containers top lifted and bottom emptied.

This document specifies requirements of stationary containers, top lifted and bottom emptied, used for collection of solid non-hazardous wastes, with capacity up to 5 000 l.
This document specifies general characteristics of such containers and their accessories, test methods and safety requirements as well as recommendations for installation, maintenance and cleaning operations.

This document specifies the additional requirements for underground or partly underground systems top lifted and bottom emptied, used for collection of solid non-hazardous wastes with a capacity up to 5 000 l.

This European Standard provides a set of CANopen application profile specifications that describes the CleANopen embedded body control network of municipal vehicles, e.g. refuse collecting trucks. It specifies the CANopen communication interfaces and the application functionality of several functional elements (virtual devices).
It does not specify CANopen devices. The CleANopen application profile specifications consist of several parts dealing with the following:
- general definitions;
- functionality of the virtual devices;
- pre defined PDOs and SDOs;
- application objects.

This part of EN 12574 specifies the test methods for stationary waste containers (in the text also called containers) according to prEN 12574-1. It also specifies the target requirements to be reached either during or after the tests.

This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in the text also called containers), not including special containers for hazardous waste.
NOTE   To help in the understanding of the requirements they are not split into separate safety, ergonomic and health sections but are divided into chapters dealing with constructional units.

This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.

This Technical Report proposes a standardized interface between the chassis-cab and the bodywork of refuse collection vehicles. The solution, initially for vehicles with hard wired interface and CAN interface, is developed into full CAN communication between the bodywork and the chassis-cab.

This European Standard specifies the requirements for container shells for mobile waste containers with a capacity up to 1 700 l covered by EN 840-1 to EN 840-4.
This European Standard specifies the general performance characteristics of such shells as well as the test methods, and gives recommendations for installation.

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

This document defines the standard for implementing a standard inter-vendors interface aimed at exchanging stationary waste container information and configuration.
This document defines the way to exchange data between the “Communication Management Systems” and the “Back-Office Systems”.
The exchange of data between the “Collection Container Systems” and the “Communication Management Systems” or the “Back-Office Systems” is excluded.
This document targets two streams of information in the waste processing industry:
- The processing of information from the deposit of waste, between communication management systems and the back office systems.
- The processing of configuration information, between the back-office systems and the communication management systems.

This European Standard specifies a way to identify the various fractions of municipal waste by a set of visual elements, including colours, symbols, text.
This European Standard is intended to create a unique operative model to easily identify the waste containers through visual elements thereby facilitating collection and recycling/recovery services for both consumers and management companies.

This document lists the general requirements to define levels of performance and acceptance for street cleaning and waste management services and to take into account to draw up and to operate service contracts for a better result in terms of qualitative and quantitative performances definition and survey, clearing agreements in case of deviations, economic optimisation, environmental sustainability and pollution prevention.
When the client isn’t a public administration but a private customer, purchasing street cleaning and/or municipal waste management services directly from the service provider, the standard is applicable, when appropriate; in this case the term “Administration” includes also these private customers.
This document is intended for public authorities and other bodies (or actors) requiring street cleaning and/or waste management services as well as for public and private waste management companies offering services of street cleaning and/or of waste and recycling operations.

The target of this standard is to provide the different actors of the services all the elements to foresee, to fix or to offer for the carrying out of each service of waste management, street cleaning and waste collection and transport, and for the remedying of the unavoidable defaults of the fulfilment of the contracts, restricting deviations in a given incidence and putting right them within time and manners prearranged. Even if the new standard might contain a section of recommended values of the quantitative and qualitative parameters of various services, the main target is to fix a methodology to describe, to survey and to appraise services and possible defaults. Consequently the new standard will cover: - the definitions of the various services, - quantitative and qualitative parameters of the services and the way to measure them, - definition of the minimum level of the service to be let on contract, - parameters to verify for the fulfilment of the contract, - methods for survey and gauge these parameters, - the list of standards that the different equipments used have to comply with, - methods of technical and economical evaluation of the deviations from the contract that are not remedied, or that are not remedied in time by the contractor.

This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2. This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.This European Standard is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.This part 1 describes and defines the safety requirements of rear loaded RCV excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5.This European Standard is not applicable to:- operation in severe conditions e.g. extreme environmental conditions such as:- below - 25 °C and above + 40 °C temperatures;- tropical environment;- wind velocity in excess of 75 km/h;- contaminating environment;- corrosive environment;- operation in potentially explosive atmospheres;- handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives);- operation on ships.This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
-   safety requirements;
-   interface requirements and performances;
-   data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.

This European Standard applies to mobile toilet cabins that are not connected to a sewerage system.
It specifies requirements of the services relating to the deployment of cabins and the relevant requirements for cabins and sanitary products, taking into account hygiene, health and safety.
It specifies minimum quality requirements relating to cabins and sanitary products and also relating to the extent of cleaning required, the number of cabins to be provided, locations and cleaning/disposal intervals.

This European Standard specifies the method for measuring the noise emission, which is a significant hazard of refuse collection vehicles (RCVs).
Its goal is to obtain, on one hand, the emission sound pressure level at the operator’s position(s) and, on the other hand, the sound power level of the RCV during waste collection. It specifies a standardized procedure for measurement and later comparison of RCVs noise emission, consisting of four operating conditions: chassis operation, compaction operation, lifting, tilting and lowering operation of a container and dumping of specified waste into the RCV.
Together with information concerning other parameters, the test results obtained in accordance with this standard are also applicable to the evaluation of the hazards generated by noise from RCVs.
This standard addresses the uncertainties due to measurement procedures.
This standard deals with the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501 series.

This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This European Standard is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This part 1 describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in EN 1501-5.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below - 25 °C and above + 40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives);
-   operation on ships.
This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

This European Standard deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated waste containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer throughout their foreseeable lifetime as defined in Clause 4.
This European Standard is applicable to the design and construction of the waste container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This European Standard describes and gives the safety requirements of the lifting devices for emptying waste containers and their interfaces with the corresponding parts of the RCVs and shall be used in conjunction with Parts 1, 2 and 3 of EN 1501 for the rear, side and front loaded RCVs. It refers to EN 1501-4 for the noise test code.
This European standard is not applicable to:
- operation in severe conditions e.g. extreme environmental conditions such as:
- temperatures below - 25° C and above + 40°C;
- tropical environment;
- wind velocity in excess of 75 km/h;
- contaminating environment;
- corrosive environment;
- operation in potentially explosive atmospheres;
- lifting and transportation of persons;
- emptying waste containers other than those manufactured according to EN 840, EN 12574, EN 13071, and those described as paladin, diamond, skip containers;
- loading bulky waste by means of platform or forks;
- handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives);
- operation on ships;
- fitting and operation on stationary compactors.
This European Standard is not applicable to machinery which is manufactured before the date of its publication by CEN.

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 5 which can arise during the operation and the maintenance of side loaded refuse collection vehicles (side loaded RCVs) used for the collection, transportation and unloading of solid wastes and as intended by the manufacturer or his authorised representative.
This European Standard deals with:
-   side loaded refuse collection vehicles as defined in Clauses 3 and 4;
-   lifting devices for side loaded refuse collection vehicles.
Examples for basic types of side loaded refuse collection vehicles are given in Annex B.
This European Standard does not establish the additional requirements for:
-   design and equipment of the chassis, considered as meeting all road traffic requirements;
-   operation in severe conditions (e.g. extreme environmental conditions such as: temperatures below –10 °C and above +40 °C, corrosive environment, tropical environment);
-   operation subject to special rules (e.g. potentially explosive atmospheres, contaminating environments);
-   static electricity problems;
-   transportation of passengers, lifting of persons;
-   loading by crane;
-   loading by a satellite vehicle;
-   containers other than those manufactured according to EN 840, EN 12574 and EN 13071;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives);
-   hazards occurring during construction, transportation, commissioning, decommissioning;
-   hazards occurring in relation to traffic on public roads;
-   wind velocity in excess of 75 km/h;
-   direct contact with foodstuffs;
-   hazards due to the noise of the side loaded RCV.

This standard applies to front loaded refuse collection vehicles, as defined in 3.2, and specifies their technical requirements.
This standard deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This standard part 3 describes and gives the requirements of the front loaded RCV and the associated lifting device(s) and refers to part 4 of this series of standards for the noise test code.
Examples for standard types of front loaded refuse collection vehicles are given in Annex C.
This European Standard is not applicable to:
   operation in severe conditions (e.g. extreme environmental conditions such as: temperatures below –25 °C and above 40 °C, corrosive environment, tropical environment, lightning, wind velocity in excess of 75 km/h);
   operation subject to special rules (e.g. potentially explosive atmospheres, contaminating environments);
   transportation of passengers, lifting of persons;
   loading by crane;
   loading by satellite vehicle;
   containers other than defined in EN 840-1 to -4, EN 12574-1 to -3 and type B of EN 13071;
   handling of loads the nature of which could lead to dangerous situations such as hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.

This European Standard specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste including:
¾   safety requirements;
¾   interface requirements and performances;
¾   data to be treated and their integrity.
This European Standard is applicable to systems for handling containers conforming to EN 840.
NOTE   Although this European Standard does not cover systems for handling containers not conforming to EN 840, it is recommended to apply the requirements of this document to these systems as far as possible.
This European Standard is applicable to systems both for billing and not for billing.

This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste and recycling containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This European Standard specifies the requirements for the container lifting connections to be used during the loading and unloading operations of the containers top lifted and bottom emptied.