EN 14803:2020/FprA1
(Amendment)Waste management - Identification and/or determination of the quantity of waste
Waste management - Identification and/or determination of the quantity of waste
This document specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste and other reusable materials including:
- safety requirements;
- interface requirements and performances;
- data to be treated and their integrity.
This document is applicable to systems for handling containers conforming to the EN 840 series.
Although this document does not cover systems for handling containers not conforming to the EN 840 series, users are encouraged to apply the requirements of this document to these systems as far as possible.
This document is applicable to systems both for billing and not for billing.
This document is applicable to systems both for billing and not for billing.
Abfallwirtschaft - Identifikation und/oder Mengenbestimmung von Abfall
Gestion des déchets - Identification et/ou détermination de la quantité de déchets
Ravnanje z odpadki - Identifikacija in/ali ugotavljanje količine odpadkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14803:2020/oprA1:2024
01-maj-2024
Ravnanje z odpadki - Identifikacija in/ali ugotavljanje količine odpadkov
Waste management - Identification and/or determination of the quantity of waste
Abfallwirtschaft - Identifikation und/oder Mengenbestimmung von Abfall
Gestion des déchets - Identification et/ou détermination de la quantité de déchets
Ta slovenski standard je istoveten z: EN 14803:2020/prA1
ICS:
13.030.01 Odpadki na splošno Wastes in general
SIST EN 14803:2020/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 14803:2020/oprA1:2024
SIST EN 14803:2020/oprA1:2024
DRAFT
EUROPEAN STANDARD
EN 14803:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2024
ICS 13.030.40
English Version
Waste management - Identification and/or determination
of the quantity of waste
Gestion des déchets - Identification et/ou Abfallwirtschaft - Identifikation und/oder
détermination de la quantité de déchets Mengenbestimmung von Abfall
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 183.
This draft amendment A1, if approved, will modify the European Standard EN 14803:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STAND
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.