EN ISO 24161:2024

SLOVENSKI STANDARD
01-julij-2024
Upravljanje zbiranja in prevoza odpadkov - Slovar (ISO 24161:2022)
Waste collection and transportation management - Vocabulary (ISO 24161:2022)
Abfallsammlung und Abfalltransportmanagement - Terminologie (ISO 24161:2022)
Gestion de la collecte et du transport des déchets - Vocabulaire (ISO 24161:2022)
Ta slovenski standard je istoveten z: EN ISO 24161:2024
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.030.01 Odpadki na splošno Wastes in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 24161
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 01.040.13; 13.030.01
English Version
Waste collection and transportation management -
Vocabulary (ISO 24161:2022)
Gestion de la collecte et du transport des déchets - Abfallsammlung und Abfalltransportmanagement -
Vocabulaire (ISO 24161:2022) Terminologie (ISO 24161:2022)
This European Standard was approved by CEN on 5 May 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24161:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 24161:2022 has been prepared by Technical Committee ISO/TC 297 "Waste collection
and transportation management” of the International Organization for Standardization (ISO) and has
been taken over as EN ISO 24161:2024 by Technical Committee CEN/TC 183 “Waste management” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 24161:2022 has been approved by CEN as EN ISO 24161:2024 without any modification.

INTERNATIONAL ISO
STANDARD 24161
First edition
2022-10
Waste collection and transportation
management — Vocabulary
Gestion de la collecte et du transport des déchets — Terminologie
Reference number
ISO 24161:2022(E)
ISO 24161:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 24161:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 Terms and definitions . 1
3.1 W aste management . 1
3.1.1 Waste management and policy . 1
3.1.2 W aste category . 2
3.1.3 Waste management facility and process . 6
3.2 C ollection and transportation . 8
3.2.1 P ersonnel . . 8
3.2.2 V ehicles and associate equipment . 9
3.2.3 S torage and collection . 10
Bibliography .13
Index .14
iii
ISO 24161:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 297, Waste collection and transportation
management.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 24161:2022(E)
Introduction
0.1 General
With global waste generation on the rise, municipalities must consider more efficient waste collection
and transportation management, including the interoperability and safe use of equipment or
technologies.
Hence, it is important to agree on a set of harmonized terms and definitions to provide a common basis
for communication and information exchange on waste collection and transportation management.
This will help to minimize ambiguity, confusion and misunderstanding of terms used in the waste
management industry.
This document enables users to understand the scope of the work of ISO/TC 297 and is the source
document for the terms and definitions of ISO/TC 297. Where a term and definition are required in a
single document, the term and definition will be referenced in that document.
These terms and definitions will serve as the basis for a common language for regulations, standards,
academia, research and training in the waste management industry.
0.2 Vocabulary structure
The arrangement of terms and definitions in this document is based upon terms corresponding to
“waste management” and “collection and transportation” in the waste collection and transportation
management field. The organization of terms is illustrated in Figure 1.
Figure 1 — Vocabulary structure
v
INTERNATIONAL STANDARD ISO 24161:2022(E)
Waste collection and transportation management —
Vocabulary
1 S cope
This document defines terms that are commonly used in the area of waste collection and transportation
management. It aims to align with terminology used internationally.
2 Normat ive references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
NOTE 'Refuse' and 'waste' are used interchangeably in this document.
3.1 Waste management
3.1.1 Waste management and policy
3.1.1.1
3Rs
reduce, reuse, recycle
three main principles which are widely used in waste management (3.1.1.9)
Note 1 to entry: Reduce, reuse and recycling are defined in 3.1.1.6, 3.1.1.8 and 3.1.3.10, respectively.
3.1.1.2
extended producer responsibility
EPR
environmental policy approach in which a producer’s responsibility for a product is extended to the
post-consumer stage of a product’s life cycle
Note 1 to entry: An EPR policy is characterized by:
a) the shifting of responsibility (physically and/or economically; fully or partially) upstream towards the
producer and away from government or municipalities;
b) the provision of incentives to producers to take into account environmental considerations when designing
their products.
Note 2 to entry: An EPR can be only financial or can be financial and operational depending on national laws.
3.1.1.3
illegal dumping
disposal (3.1.3.3) of waste (3.1.2.31) without legal permission, in violation of national laws
ISO 24161:2022(E)
3.1.1.4
integrated waste management
well-planned and connected services,
...