EN 15132:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods,]YHGEHQHAbris pour conteneurs roulants a déchets de capacité inférieure ou égale a 1 700 l - Exigences de performance et méthodes d'essaiAbfallbehälterschränke für fahrbare Abfallsammelbehälter mit einem Nennvolumen bis 1 700 l - Anforderungen an die Ausführung und PrüfverfahrenTa slovenski standard je istoveten z:EN 15132:2006SIST EN 15132:2007en;fr;de13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:SLOVENSKI
STANDARDSIST EN 15132:200701-april-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15132September 2006ICS 13.030.40 English VersionContainer shells for mobile waste containers with a capacity upto 1 700 l - Performance requirements and test methodsAbris pour conteneurs roulants à déchets de capacitéinférieure ou égale à 1 700 l - Exigences de performance etméthodes d'essaisAbfallbehälterschränke für fahrbare Abfallsammelbehältermit einem Nennvolumen bis 1 700 l - Anforderungen an dieAusführung und PrüfverfahrenThis European Standard was approved by CEN on 6 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15132:2006: E

Weathering test.12 Bibliography.13

1 Scope This European Standard specifies the requirements for container shells for mobile waste containers with a capacity up to 1 700 l covered by EN 840-1 to EN 840-4. This European Standard specifies the general performance characteristics of such shells as well as the test methods, and gives recommendations for installation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 105-B02, Textiles - Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) EN ISO 877, Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) EN ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps (ISO 4892-2:2006) EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227:2006) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 mobile waste container appropriately designed container fitted with wheels intended to temporarily store waste
3.2 container shell equipment used as street furniture for housing mobile waste container
3.3 ground level level where the user is standing while filling the container shell
3.4 loading height vertical distance between the base of the container shell and the bottom of the shell’s filling aperture(s)
3.5 total height vertical distance between the ground level and the highest point of the container shell
3.6 clearance empty area from the container shell walls to the waste container
...