EN 840-5:2012
(Main)Mobile waste and recycling containers - Part 5: Performance requirements and test methods
Mobile waste and recycling containers - Part 5: Performance requirements and test methods
This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.
Fahrbare Abfall- und Wertstoffbehälter - Teil 5: Anforderungen an die Ausführung und Prüfverfahren
Die Europäische Norm legt die Prüfverfahren für fahrbare Abfall- und Wertstoffbehälter nach EN 840 1 bis EN 840 4 fest. Sie legt auch die Anforderungsstufen fest, die während oder nach der Prüfung erreicht werden müssen.
Die vorliegende Europäische Norm gilt für fahrbare Abfall- und Wertstoffbehälter mit einem Nennvolumen bis 1 700 l.
Conteneurs roulants à ordures ménagères et recyclables - Partie 5 : Exigences de performance et méthodes d'essais
La présente Norme européenne spécifie les méthodes d'essais applicables aux conteneurs roulants à ordures ménagères et recyclables conformes aux prEN 840-1 à prEN 840-4. Elle indique également le niveau des exigences à atteindre lors des essais ou à l’issue des essais.
Le présente Norme européenne s'applique aux conteneurs roulants à ordures ménagères et recyclables de capacité inférieure ou égale à 1 700 l.
Premični zabojniki za odpadke in za recikliranje - 5. del: Zahtevane lastnosti in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 840-5:2014
01-marec-2014
1DGRPHãþD
SIST EN 840-5:2004
3UHPLþQL]DERMQLNL]DRGSDGNHLQ]DUHFLNOLUDQMHGHO =DKWHYDQHODVWQRVWLLQ
SUHVNXVQHPHWRGH
Mobile waste and recycling containers - Part 5: Performance requirements and test
methods
Fahrbare Abfall- und Wertstoffbehälter - Teil 5: Anforderungen an die Ausführung und
Prüfverfahren
Conteneurs roulants à ordures ménagères et recyclables - Partie 5 : Exigences de
performance et méthodes d'essais
Ta slovenski standard je istoveten z: EN 840-5:2012
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 840-5:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 840-5:2014
---------------------- Page: 2 ----------------------
SIST EN 840-5:2014
EUROPEAN STANDARD
EN 840-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 13.030.40 Supersedes EN 840-5:2004
English Version
Mobile waste and recycling containers - Part 5: Performance
requirements and test methods
Conteneurs roulants à ordures ménagères et recyclables - Fahrbare Abfall- und Wertstoffbehälter - Teil 5:
Partie 5 : Exigences de performance et méthodes d'essais Anforderungen an die Ausführung und Prüfverfahren
This European Standard was approved by CEN on 22 September 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 840-5:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 840-5:2014
EN 840-5:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Tests .4
5 Test report . 20
Annex A (informative) Slope and stop for "kerb travel" test . 21
Annex B (informative) Apparatus for kerb fall test . 22
Annex C (informative) Apparatus for lateral impact test on inclined plane . 24
Annex D (informative) Wheel Test . 25
Annex E (informative) Weathering tests . 26
Annex F (informative) A-Deviations . 27
Bibliography . 28
2
-----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.