91.160 - Lighting
ICS 91.160 Details
Lighting
Beleuchtung
Eclairage
Razsvetljava
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 91.160 - Lighting
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies lighting requirements for humans in outdoor work places, which meet the needs for visual comfort and performance of people having normal, or corrected to normal ophthalmic (visual) capacity. Usual visual tasks and the avoidance of obtrusive light are considered.
This document specifies requirements for lighting solutions for most outdoor work places and their associated areas in terms of quantity and quality of illumination. In addition, recommendations are given for good lighting practice. This document does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 153 of Treaty on the Functioning of the European Union although the lighting requirements, as specified in this document, usually fulfil safety needs.
NOTE Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 153 of Treaty on the Functioning of the European Union, in national legislation of member states implementing these directives or in other national legislation of member states.
This document neither provides specific solutions, nor restricts the designers' freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, electric lighting or a combination of both.
This document is not applicable for the lighting of indoor work places and underground mining or emergency lighting. For indoor work places, see EN 12464-1 and for emergency lighting, see EN 1838 and EN 13032-3.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard58 pagesGerman languagesale 10% offe-Library read for1 day
This document specifies the luminous requirements for emergency lighting systems, including adaptive emergency escape lighting systems, electric emergency lighting, installed in premises or locations where such systems are required or needed and which are principally applicable to locations where the public or workers have access.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This technical specification identifies and clarifies lighting properties for digital building design and maintenance.
This document provides all the needed properties to design and to describe lighting systems. These properties are intended to be used for mapping between data providers and requesters. The mapping of the identifiers enables the exchange of luminaire and sensing device data within different databases.
The unambiguous mapping and description of properties improves the data quality, reduces misinterpretations and the processing time in digital environments. Therefore, the properties listed in this document establish the essential description of lighting systems in BIM systems and databases.
The listed properties in this document are used to structure the product data sheet which is complemented with real product information.
- Technical specification69 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies lighting requirements for humans in indoor work places, which meet the needs for visual comfort, performance and safety of people having normal, or corrected to normal visual capacity and response to light. This document specifies requirements for lighting solutions for typical indoor work places and their associated areas in terms of quantity and quality of illumination. The illumination can be provided by daylight, electric light sources, or a combination of both. This document gives recommendations for good lighting to fulfil the needs of integrative lighting. This document neither provides specific solutions nor recommendations for atmosphere or aesthetics created by lighting. It does not restrict the designers' freedom from exploring new techniques nor restrict the use of innovative equipment. This document is not applicable for emergency lighting. For emergency lighting, see ISO 30061.
- Standard109 pagesEnglish languagesale 15% off
This document defines the procedures as well as the means to implement adequate lighting, with regard to the exhibition lighting and the conservation policy. This also includes security and cleaning lighting. It takes visual, exhibition and conservation aspects into account and it also discusses the implications of the lighting design on the safeguarding of cultural heritage. This document gives recommendations on luminous exposure values. It aims to provide a tool for setting up a common European policy and a guide to help curators, conservators and project managers to assess the correct lighting that can ensure the safeguarding of the objects. This document covers indoor lighting for heritage objects on exhibition in both public and private sites and does not consider lighting in other cultural heritage contexts such as open-air collections, etc.
This document does not cover non-public activities such as conservation-restoration, storage, emergency lighting and research.
- Standard56 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the luminous requirements for emergency lighting systems, including adaptive emergency escape lighting systems, electric emergency lighting, installed in premises or locations where such systems are required or needed and which are principally applicable to locations where the public or workers have access.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies lighting requirements for humans in outdoor work places, which meet the needs for visual comfort and performance of people having normal, or corrected to normal ophthalmic (visual) capacity. Usual visual tasks and the avoidance of obtrusive light are considered.
This document specifies requirements for lighting solutions for most outdoor work places and their associated areas in terms of quantity and quality of illumination. In addition, recommendations are given for good lighting practice. This document does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 153 of Treaty on the Functioning of the European Union although the lighting requirements, as specified in this document, usually fulfil safety needs.
NOTE Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 153 of Treaty on the Functioning of the European Union, in national legislation of member states implementing these directives or in other national legislation of member states.
This document neither provides specific solutions, nor restricts the designers' freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, electric lighting or a combination of both.
This document is not applicable for the lighting of indoor work places and underground mining or emergency lighting. For indoor work places, see EN 12464-1 and for emergency lighting, see EN 1838 and EN 13032-3.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard58 pagesGerman languagesale 10% offe-Library read for1 day
This document defines the calculation methodology for determining the monthly and annual amount of usable daylight penetrating non-residential buildings through vertical facades and rooflights and the impact thereof on the energy demand for electric lighting. This document is applicable for existing buildings and the design of new and renovated buildings. This document provides the overall lighting energy balance equation relating the installed power density of the electric lighting system with daylight supply and lighting controls (proof calculation method). The determination of the installed power density is not in the scope of this method, neither are controls relating, for instance, to occupancy detection. Provided the determination of the installed power density and control parameters using external sources, the internal loads by lighting and the lighting energy demand itself can be calculated. The energy demand for lighting and internal loads by lighting can then be taken into account in the overall building energy balance calculations: — heating; — ventilation; — climate regulation and control (including cooling and humidification); — heating the domestic hot-water supply of buildings. For estimating the daylight supply and rating daylight-dependent electric lighting control systems, a simple table-based calculation approach is provided. The simple method describes the division of a building into zones as required for daylight illumination-engineering purposes, as well as considerations on the way in which daylight supplied by vertical facade systems and rooflights is utilized and how daylight-dependent lighting control systems affect energy demand. Dynamic vertical facades with optional shading and light redirection properties are considered, i.e. allowing a separate optimization of facade solutions under direct insolation and under diffuse skies. For rooflighting systems, standard, static solutions like shed rooflights and continuous rooflights are considered. The method is applicable for different latitudes and climates. For standard building zones (utilizations), operation times are provided. For detailed analysis, an approach to calculate the effect of daylight on the lighting energy demand on an hourly or sub-hourly basis is provided. Unlike the simple table-based annual calculation approach, which is regression based, this method relies on an emulation concept. Relevant quantities are modelled explicitly and are then interacting directly with sensors, actuators and functional elements of the building automation and control system (BACS) or are triggering user interaction. By this approach, model configuration and parametrization from the design stage can seamlessly be used in the BACS configuration. To support overall building performance assessment, additional daylight performance indicators on the overall building level are provided.
- Standard97 pagesEnglish languagesale 15% off
This CEN Technical Specification specifies the lighting and operating requirements for the application of adaptive emergency escape lighting systems that can interact with management and control systems or be provided with functionality to modify the operation of emergency escape lighting according to situational requirements, in terms of luminous flux output, escape directions and the characteristics and meaning of emergency escape lighting.
The situational requirements can require the involvement and interaction with components and systems other than emergency escape lighting systems.
Requirements for these components or systems are not part of this document.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the commissioning of lighting systems in buildings to meet defined design specifications. This document presents details of the commissioning of lighting systems without focusing on the technical characteristics of specific components.
This document can be applied to new installations or renovations of non-residential buildings and public spaces of multi-occupancy residential buildings.
This document does not cover electrical power connection aspects of lighting system components, which are deemed to be in compliance with relevant legislation or standards.
This document is not applicable to the commissioning of emergency lighting.
- Technical specification18 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines basic terms and definitions for use in all lighting applications. This document also sets out a framework for the specification of lighting requirements, giving details of aspects that are to be considered when setting those requirements.
- Standard79 pagesEnglish languagesale 10% offe-Library read for1 day
New edition of EN 50172
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
New edition of EN 50172
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This CEN Technical Specification specifies the lighting and operating requirements for the application of adaptive emergency escape lighting systems that can interact with management and control systems or be provided with functionality to modify the operation of emergency escape lighting according to situational requirements, in terms of luminous flux output, escape directions and the characteristics and meaning of emergency escape lighting.
The situational requirements can require the involvement and interaction with components and systems other than emergency escape lighting systems.
Requirements for these components or systems are not part of this document.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines basic terms and definitions for use in all lighting applications. This document also sets out a framework for the specification of lighting requirements, giving details of aspects that are to be considered when setting those requirements.
- Standard79 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for the commissioning of lighting systems in buildings to meet defined design specifications. This document presents details of the commissioning of lighting systems without focusing on the technical characteristics of specific components.
This document can be applied to new installations or renovations of non-residential buildings and public spaces of multi-occupancy residential buildings.
This document does not cover electrical power connection aspects of lighting system components, which are deemed to be in compliance with relevant legislation or standards.
This document is not applicable to the commissioning of emergency lighting.
- Technical specification18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies elements for achieving, by means of natural light, an adequate subjective impression of lightness indoors, and for providing an adequate view out. In addition, recommendations for the duration of sunshine exposure within occupied rooms are given.
This document gives information on how to use daylighting to provide lighting within interiors, and how to limit glare. This document defines metrics used for the evaluation of daylighting conditions and gives principles of calculation and verification. These principles allow to address the issue of variability of daylight over the days and the year.
This document applies to all spaces that may be regularly occupied by people for extended periods except where daylighting is contrary to the nature and role of the actual work done.
The specification of lighting requirements for humans in indoor work places including visual tasks are given in EN 12464-1 and are not part of this document.
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation65 pagesSlovenian languagesale 10% offe-Library read for1 day
This document provides information to support the correct understanding, use and national implementations of ISO/TS 21274. It gives explanations on the procedures and background information. It also provides justifications of the choices that have been made. It gives detailed examples to illustrate the overall workings of ISO/TS 21274.
- Technical report17 pagesEnglish languagesale 15% off
This document is a technical report supporting ISO/CIE 20086.
- Technical report82 pagesEnglish languagesale 15% off
This document provides users of interactive systems with a summary of the existing knowledge about ergonomics considerations for the influence of artificial (electric) and natural lighting of environments on humans other than on vision, with a focus on non-image-forming effects. The document can furthermore be used as guidance on the specification of use environments in consideration of non-visual effects of lighting, also called non-image-forming (NIF) functions. Therapeutic use of light and optical radiation is not part of this document.
- Technical report35 pagesEnglish languagesale 15% off
This document provides an analysis and evaluation of the current state of the art with regard to ipRGC-influenced responses to light in applying this knowledge in the context of identified topics to be considered for use in lighting applications. This analysis has taken into consideration published scientific papers, use cases, reports, best-practice guidelines and recommendations, see Annex A. However, evaluation of the results will be based on scientifically validated findings.
- Technical report17 pagesEnglish languagesale 15% off
CLC/TC 34 took decision to unlink project from LVD
- Amendment9 pagesEnglish languagesale 10% offe-Library read for1 day
This part of IEC 60598 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V.
This document does not cover the effects of non-emergency voltage reductions on luminaires incorporating high pressure discharge lamps.
This document gives general requirements for emergency lighting equipment.
In this document, the term "lamp" which also includes "light source(s)" where appropriate, is used.
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies elements for achieving, by means of natural light, an adequate subjective impression of lightness indoors, and for providing an adequate view out. In addition, recommendations for the duration of sunshine exposure within occupied rooms are given.
This document gives information on how to use daylighting to provide lighting within interiors, and how to limit glare. This document defines metrics used for the evaluation of daylighting conditions and gives principles of calculation and verification. These principles allow to address the issue of variability of daylight over the days and the year.
This document applies to all spaces that may be regularly occupied by people for extended periods except where daylighting is contrary to the nature and role of the actual work done.
The specification of lighting requirements for humans in indoor work places including visual tasks are given in EN 12464-1 and are not part of this document.
- Standard65 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation65 pagesSlovenian languagesale 10% offe-Library read for1 day
This document specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 1838. This document does not define the data requirements for signage, as these can be found in EN 1838.
This document is used in conjunction with EN 13032-1 and EN 13032-4.
This document specifies the requirements for emergency lighting with or without a replaceable light source.
NOTE Product, safety and performance data can be found in CENELEC documents (see Bibliography).
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 1838. This document does not define the data requirements for signage, as these can be found in EN 1838.
This document is used in conjunction with EN 13032-1 and EN 13032-4.
This document specifies the requirements for emergency lighting with or without a replaceable light source.
NOTE Product, safety and performance data can be found in CENELEC documents (see Bibliography).
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies lighting requirements for humans in indoor work places, which meet the needs for visual comfort and performance of people having normal, or corrected to normal ophthalmic (visual) capacity. All usual visual tasks are considered, including Display Screen Equipment (DSE).
This document specifies requirements for lighting solutions for most indoor work places and their associated areas in terms of quantity and quality of illumination. In addition, recommendations are given for good lighting practice including visual and non-visual (non-image forming) lighting needs. This document does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 169 of Treaty on the Functioning of the European Union although the lighting requirements, as specified in this document, usually fulfil safety needs.
NOTE Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 169 of Treaty on the Functioning of the European Union, in national legislation of member states implementing these directives or in other national legislation of member states.
This document neither provides specific solutions, nor restricts the designers' freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, electric lighting or a combination of both.
This document is not applicable for the lighting of outdoor work places and underground mining or emergency lighting. For outdoor work places, see EN 12464-2 and for emergency lighting, see EN 1838 and EN 13032-3.
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation109 pagesSlovenian languagesale 10% offe-Library read for1 day
This document specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on the instructions for use, marking and packaging.
This document applies to operating lights, irrespective of the technology of the light source.
This document excludes auxiliary light sources, for example, from dental handpieces and dental headlamps and also operating lights which are specifically designed for use in oral surgery.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Standard106 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies lighting requirements for humans in indoor work places, which meet the needs for visual comfort and performance of people having normal, or corrected to normal ophthalmic (visual) capacity. All usual visual tasks are considered, including Display Screen Equipment (DSE).
This document specifies requirements for lighting solutions for most indoor work places and their associated areas in terms of quantity and quality of illumination. In addition, recommendations are given for good lighting practice including visual and non-visual (non-image forming) lighting needs. This document does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 169 of Treaty on the Functioning of the European Union although the lighting requirements, as specified in this document, usually fulfil safety needs.
NOTE Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 169 of Treaty on the Functioning of the European Union, in national legislation of member states implementing these directives or in other national legislation of member states.
This document neither provides specific solutions, nor restricts the designers' freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, electric lighting or a combination of both.
This document is not applicable for the lighting of outdoor work places and underground mining or emergency lighting. For outdoor work places, see EN 12464-2 and for emergency lighting, see EN 1838 and EN 13032-3.
- Standard117 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard – translation109 pagesSlovenian languagesale 10% offe-Library read for1 day
This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This standard does not provide any procedure for the dynamic simulation of lighting scene setting.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2.
(...)
- Standard106 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out by the operator.
This document does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European standard dealing with the lighting of work places, see EN 12464-1 and EN 12464-2 for further information.
This document does not specify additional requirements for the operation of lighting systems:
- in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.);
- subject to special rules (e.g. explosive atmospheres);
- where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out by the operator.
This document does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European standard dealing with the lighting of work places, see EN 12464-1 and EN 12464-2 for further information.
This document does not specify additional requirements for the operation of lighting systems:
- in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.);
- subject to special rules (e.g. explosive atmospheres);
- where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60050-845:2020 gives the general terminology used in lighting, as well as general terms pertaining to specific applications and associated technologies. This second edition reviews and complements the previous one. It has the status of a horizontal publication in accordance with IEC Guide 108. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
- Standard1317 pagesEnglish and French languagesale 15% off
This document specifies requirements for the commissioning of lighting systems in buildings to meet design specifications. This document presents details of the commissioning of lighting systems without focusing on the technical characteristics of specific components. This document can be applied to new installations of non-residential buildings and public spaces of multi-residence buildings. This document does not cover the commissioning of lighting systems concerning the electrical power connection aspects which are deemed to be in compliance with relevant legislation or standards. This document is not applicable to the commissioning of emergency lighting.
- Technical specification15 pagesEnglish languagesale 15% off
- Technical specification15 pagesFrench languagesale 15% off
ISO/CIE 8995-3:2018 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard7 pagesEnglish languagesale 15% off
This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport heavy rail units, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address the requirements of lighting of boarding aids, e.g. moving entrance stairs or lifts.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1 The requirements for interior lighting for urban rail units can be found in EN 13272-2.
NOTE 2 The requirements for cab instrument lighting for heavy rail units can be found in EN 16186-2.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1 The requirements for interior lighting for heavy rail vehicles can be found in EN 13272-1.
NOTE 2 The requirements for cab instrument lighting for heavy rail vehicles can be found in EN 16186-2.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish and French languagesale 15% off
This document describes the measurement method for the lifetime behaviour of aircraft cabin light units in a standardized aircraft-related environment.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport heavy rail units, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address the requirements of lighting of boarding aids, e.g. moving entrance stairs or lifts.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1 The requirements for interior lighting for urban rail units can be found in EN 13272-2.
NOTE 2 The requirements for cab instrument lighting for heavy rail units can be found in EN 16186-2.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the requirements for measurement of electrical, photometric, and colorimetric quantities of LED lamps, modules, light engines and luminaires, for operation with AC or DC supply voltages, possibly with associated control gear. Photometric and colorimetric quantities covered in this standard include total luminous flux, luminous efficacy, partial luminous flux, luminous intensity distribution, centre-beam intensities, luminance and luminance distribution, chromaticity coordinates, correlated color temperature (CCT), Color Rendering Index (CRI), and spatial uniformity of chromaticity.
This standard does not cover LED packages and products based on OLEDs (organic LEDs).
NOTE Where the term "LED product, LED device or DUT (device under test)" is used, the term covers LED lamps, modules, light engines or luminaires.
- Standard71 pagesEnglish languagesale 10% offe-Library read for1 day
This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in instruments or controls.
This document does not address lighting installed for indication or effect purposes, including flashing lights and decorative lighting.
NOTE 1 The requirements for interior lighting for heavy rail vehicles can be found in EN 13272-1.
NOTE 2 The requirements for cab instrument lighting for heavy rail vehicles can be found in EN 16186-2.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
This document specifies lighting for those indoor and outdoor sports events most practised in Europe. This document only considers artificial lighting. It provides lighting values for the design and control of sports lighting installations in terms of illuminances, uniformity, glare restriction and colour properties of the light sources. All requirements are intended to be as minimum requirements. It also gives methods by which these values are measured. For the limitation of glare, it also points out restrictions on the location of the luminaires for specific applications.
For emergency lighting this document refers to the requirements of EN 1838.
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies steps to be taken in the lighting system design process and lists responsibilities for the implementation and operation of the lighting solution. The aim of the process is:
1) to design lighting system solutions for sustainable lighting quality based on recommendations in the relevant lighting application standards, for the wellbeing of users and for a pleasant built environment, and
2) to ensure that the light requirements are fulfilled with energy efficient solutions (luminaire and control system) with data that can be used in the energy calculations, and
3) to list the equipment information to be used in the installation, commissioning, operation, maintenance of the lighting system over the years and the decommissioning process, and
4) to compile the documents defining the designed lighting system solution.
The described lighting system design process applies to all projects of buildings and facilities whether, new or a refurbishment in the lighting sector. This includes amongst others the following applications:
- office buildings - business, communication, design;
- industry buildings - manufacture, warehouse;
- outdoor work place areas - shipyards, marshalling yards, timber works;
- healthcare buildings - hospitals, hospice, residential and elderly care facilities;
- retail buildings - shops, supermarkets, wholesale establishments;
- hospitality buildings - bedded areas, meeting rooms, restaurant, café;
- sports - indoor sports facilities and outdoor sports fields;
- education buildings - schools, colleges, universities;
- roads - traffic routes and conflict areas;
- amenity areas - cycle paths, residential roads, pedestrian areas;
- parking areas - indoor and outdoor.
The process does not apply to:
- specialized lighting systems, (historic buildings, stage, studio, dentist, operating table, etc.);
- lighting built into machinery or medical equipment;
- temporary lighting installations.
This document is not applicable to the design of the relevant electrical system and structures.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a standardized way of working for determining the maintenance factor for both outdoor and indoor lighting installations using the methodology as described in CIE 154:2003 and CIE 097:2005.
- Technical specification28 pagesEnglish languagesale 15% off
This document specifies lighting for those indoor and outdoor sports events most practised in Europe. This document only considers artificial lighting. It provides lighting values for the design and control of sports lighting installations in terms of illuminances, uniformity, glare restriction and colour properties of the light sources. All requirements are intended to be as minimum requirements. It also gives methods by which these values are measured. For the limitation of glare, it also points out restrictions on the location of the luminaires for specific applications.
For emergency lighting this document refers to the requirements of EN 1838.
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination inside non-residential buildings and for calculating or measuring the amount of energy required or used for lighting inside buildings. This document does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display lighting, desk lighting or luminaires built into furniture. This document does not provide any procedure for the dynamic simulation of lighting scene setting.
- Standard58 pagesEnglish languagesale 15% off
This document specifies steps to be taken in the lighting system design process and lists responsibilities for the implementation and operation of the lighting solution. The aim of the process is:
1) to design lighting system solutions for sustainable lighting quality based on recommendations in the relevant lighting application standards, for the wellbeing of users and for a pleasant built environment, and
2) to ensure that the light requirements are fulfilled with energy efficient solutions (luminaire and control system) with data that can be used in the energy calculations, and
3) to list the equipment information to be used in the installation, commissioning, operation, maintenance of the lighting system over the years and the decommissioning process, and
4) to compile the documents defining the designed lighting system solution.
The described lighting system design process applies to all projects of buildings and facilities whether, new or a refurbishment in the lighting sector. This includes amongst others the following applications:
- office buildings - business, communication, design;
- industry buildings - manufacture, warehouse;
- outdoor work place areas - shipyards, marshalling yards, timber works;
- healthcare buildings - hospitals, hospice, residential and elderly care facilities;
- retail buildings - shops, supermarkets, wholesale establishments;
- hospitality buildings - bedded areas, meeting rooms, restaurant, café;
- sports - indoor sports facilities and outdoor sports fields;
- education buildings - schools, colleges, universities;
- roads - traffic routes and conflict areas;
- amenity areas - cycle paths, residential roads, pedestrian areas;
- parking areas - indoor and outdoor.
The process does not apply to:
- specialized lighting systems, (historic buildings, stage, studio, dentist, operating table, etc.);
- lighting built into machinery or medical equipment;
- temporary lighting installations.
This document is not applicable to the design of the relevant electrical system and structures.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for1 day