NEXT ACTION: BT approved publication with Annexes ZZ and ZA
2020-07-30 NEXT ACTION: CCMC ACTION BY 2020-09-30
2020-03-05 second assessment refused
2020-03-05: assessment negative, document blocked until such a time as the assessment can be resolved.
2020-01-31 PeC: Annex ZA was sent for assessment, to be added to the standard

    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day

IEC 60598-1:2020 is available as IEC 60598-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60598-1:2020 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiologic...view more

    • sale 10% off
    • Standard
      239 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60598 specifies requirements for extra-low-voltage lighting systems for ELV
light sources, intended for ordinary interior use on supply voltages not exceeding 1 000 V. The
luminaires, being connected in parallel, are supplied via freely suspended continuous
supporting conductors or profiles, the current in the ELV part of the system not exceeding 25 A.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

2020-08-05 NEXT ACTION: CCMC action by 2020-08-31
2020-08-03 CCMC to prepare request for BT
2020-08-03 since no 2nd assessment allowed, EC confirmed that TC met requirements for pos. ass.  
2019-02-20 PC: "lack of compliance" for LVD, TC to adress comments
2019-01-30 PC: Sent for LVD assessment
2018-03-22 - missing Annex ZZ - on hold
2017-10-05 - Cannot allocate for publication due to missing assessment from Consultant.

    • sale 10% off
    • Amendment
      15 pages
      English language
    • e-Library read for
      1 day

This document describes the method of measuring, evaluating and specifying the UV irradiation
characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes.
It includes specific requirements regarding the marking of such lamps.
These requirements relate only to type testing.
Lamps complying with the requirements of this document comply with the electrical and
mechanical safety requirements of IEC 61195 and IEC 61199 with the exception of the
requirements...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies methods of measurement of electrical power consumption in nonactive
mode(s), as applicable for electrical lighting equipment. This includes electrical lighting
equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC
or up to 1 000 V AC.
This document is intended to be referenced by lighting ...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This document specifies performance requirements for electronic controlgear for use on DC or
AC supplies up to 1 000 V (alternating current at 50 Hz or 60 Hz) and with an output
frequency which can deviate from the supply frequency, associated with LED modules
according to IEC 62031. Controlgear for LED modules specified in this document are
designed to provide constant voltage or current. Deviations from the pure voltage and current
types do not exclude the gear from this document.
NOTE 1...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document describes a method, based on measurements combined with calculations, to
determine specific characteristics of the inrush current of single and/or multiple lighting products
of the same type. Lighting products include the following:
• light sources with integrated controlgear,
• controlgear,
• luminaires.
The inrush current characteristics that are determined are
• the peak inrush current,
• the inrush current pulse duration.
This document applies to lighting products conn...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

IEC 62386-105:2020 applies to control gear and control devices. Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension p...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

NEXT ACTION: CCMC to finalize publication
2019-11-13 PeC: BT approved the publication
2019-03-21 - GEM - TC discussed with consultant (C. Maes) at meeting (MArch 2019) - comments accepted - Annex ZA to be dated. Project has normative refverence to PR=63474, which creates a dependency.
2019-02-28 PC: to be flagged for LVD citation when ready
2018-12-17 PC: "Lack of compliance" for LVD, undated references in the Annex ZA and some points in the standards should be clarified
2017-11-21 - Neg...
view more

    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day

NEXT ACTION: PUBLICATION EXPECTED BY 2020-04

    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day

EN-IEC 62031 specifies general and safety requirements for light-emitting diode (LED) modules: • non-integrated LED modules (LEDni modules) and semi-integrated LED modules (LEDsi modules) for operation under constant voltage, constant current or constant power; • Integrated LED modules (LEDi modules) for use on DC supplies up to 250 V or AC supplies up to 1 000 V at 50 Hz or 60 Hz. LED modules within the scope of this document can be integral, built-in or independent. This document is not applic...view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

EN-IEC 63013 is applicable to LED packages for general lighting services. It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used. These proje...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

It contains the recommendations of the IEC in regard to Lamp Caps and Holders in general use today, together with relevant gauges, with the object of securing International interchangeability. The gauges illustrated, although generally accepted in principle, are not necessarily the only form in which they can be made.

    • sale 10% off
    • Amendment
      52 pages
      English and French language
    • e-Library read for
      1 day

2019-02-26 PC: BT approved the European elements, standard can be published
2019-01-22SW: Waiting for BT document to approve annex ZZ.
2019-01-18; GEM: EY quality review confirmation to consider as 'compliant'
2018-09-26: PEC: LVD assessment 'compliant', can be cited for LVD
2018-07-13 - GEM: [assessment received:2018-07-13] [ref:CLCTC34_61527_PUB_M511_20180601_AR]  [outcome:inconclusive] - CCMC/TC to advise how to adress this
2018-04-27: Annex zz recieved - waiting for consultant assessmen...
view more

    • sale 10% off
    • Amendment
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies the analogue control interface of controlgear which has the function
of controlling the output of the controlgear. The output of the controlgear is controlled
between minimum/off and maximum values by the voltage control device sinking the
controlgear current source.
This document does not specify safety requirements for the analogue interface of controlgear.
Safety requirements are given in IEC 61347 (all parts).

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

IEC 63146:2019 establishes requirements for specification sheets relating to light emitting diode (LED) packages designed for the emission of white light for general lighting applications. This document does not contain compliance criteria.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting
equipment. This part of IEC 62386 applies to a system with wireless or alternative wired
communication between its units, instead of a wired bus system, where the meaning of
“wireless or alternative wired communication”, or in short “telecommunication”, is any type of
communication network different from the wired system described in IEC 62386-101.
Where the electronic lighting equipment is cov...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

NEXT Action: CCMC to make available
2019-03-06 - Sent to BT for approval of A nnex ZA/ZZ (approved=D162/C075)
2018-12-13 PeC: "Compliant" for LVD
2018-11-20 PeC: sent to BT to keep ratification pending in order to fix harmonization (approved D161/C072)
2018-11-12 PeC: submitted for HAS assessment
2017-11-21 - Negative assessment is received during CDV stage. Consultant assessment request is missing for FDIS.

    • sale 10% off
    • Amendment
      17 pages
      English language
    • e-Library read for
      1 day

NEXT Action: CCMC to make available
2019-01-21 PeC: "Compliant" for LVD, sent to BT for integration (approved=D162/C043)
2018-11-21 PeC: sent to BT to keep ratification pending in order to fix harmonization (approved=D161/C073)
2018-11-12 PeC: submitted for HAS assessment
2017-07-31 - Cannot allocate for publication due to negative assessment from Consultant.

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

CMs required - WI=58957
Work started in CLC/SR 34A then transferred in the newly created CLC/TC 34A (D145/097)

    • sale 10% off
    • Amendment
      107 pages
      English language
    • e-Library read for
      1 day

2019-10-24 PeC: to revisit after SLR is published

    • sale 10% off
    • Amendment
      23 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is applicable to control gear supporting centrally supplied emergency operation
as described in EN 50171.
This document does not apply to self-contained emergency lighting control gear. These types
of control gear are specified in IEC 62386-202.

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

2019-01-22 - after TC 34 input
- LVD (NAC) assessment positive on 2018-03-28
- no relation to RED
publication to proceed

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

2021-03-29FM: CCMC decided not to offer for citation as linked to Directives that have been updated since this standard has been made available.

    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for metal halide lamps for general lighting purposes. For some of the requirements given in this document, reference is made to "the relevant lamp data sheet". For some lamps, these data sheets are contained in this document. For other lamps, falling under the scope of this document, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this document relate only to type testing. The requirements and...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for metal halide lamps for general
lighting purposes.
For some of the requirements given in this document, reference is made to “the relevant lamp
data sheet”. For some lamps, these data sheets are contained in this document. For other
lamps, falling under the scope of this document, the relevant data are supplied by the lamp
manufacturer or responsible vendor.
The requirements of this document relate only to type testing.
The requireme...
view more

    • sale 10% off
    • Standard
      415 pages
      English language
    • e-Library read for
      1 day

A luminous sign, light-artwork or architectural accent lighting (finished functional sign, abbreviated: sign) shall comply with this product standard.
The finished functional sign as a product fulfilling its intended purpose as luminous sign can be achieved by combining products with similar purpose through installation (according to HD 384/HD 60364 series) in order to yield a new product by itself.
NOTE 1: The scope of this product standard is specified by the areas C,D and E in the figure of...
view more

    • sale 10% off
    • Corrigendum
      4 pages
      English language
    • e-Library read for
      1 day

IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply.
This document is applicable to control gear supporting the demand response functionality.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day