IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation.
The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes.
This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    8 pages
    English language
    sale 15% off

IEC TS 63116:2021(E) specifies general requirements for design, installation and maintenance of a lighting system.
A lighting system comprises a set of products. Requirements of the products are specified in product standards. For the general requirements of lighting systems, this document prevails.
Construction of lighting systems can vary in applications. This document is not intended to provide detailed technical specifications for the construction of lighting systems but to specify requirements in general that are necessary for lighting systems.

  • Technical specification
    30 pages
    English language
    sale 15% off
  • Technical specification
    10 pages
    English language
    sale 15% off

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting. The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit. This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation. The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes. This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-251:2023 specifies an extension to memory bank 1 to enable asset management functionality. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-253:2023 specifies the information related to diagnostics and maintenance information accessible through memory banks. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange. The information given for light sources in this document is specific to LED light sources.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-250:2023 specifies the characteristics of a bus power supply integrated in a control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-252:2023 specifies the information related to energy reporting accessible through memory banks in control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-253:2023 specifies the information related to diagnostics and maintenance information accessible through memory banks. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange. The information given for light sources in this document is specific to LED light sources. This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-250:2023 specifies the characteristics of a bus power supply integrated in a control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series. This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-252:2023 specifies the information related to energy reporting accessible through memory banks in control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange. This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-251:2023 specifies an extension to memory bank 1 to enable asset management functionality. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series. This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting.
The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
This document specifies the level of SELV, and alternatively PELV, under consideration of additional personnel protection during work on live secondary circuits by electrically skilled persons. This document also covers the special operational features of aeronautical ground lighting and addresses the level of training and the requirements for maintenance procedures detailed in IEC 61821 and other national or regional regulation.
The requirements and tests are intended to set a specification framework for system designers, system installers, users, and maintenance personnel to ensure a safe and economic use of electrical systems in installations for the beaconing of aerodromes.
This document complements existing IEC aeronautical ground lighting (AGL) standards and can be used as a design specification.

  • Standard
    91 pages
    English and French language
    sale 15% off

IEC 62386-150:2023 specifies the minimum requirements for an auxiliary (AUX) power supply that can be used to power a load, such as a sensor or communication device.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-150:2023 specifies the minimum requirements for an auxiliary (AUX) power supply that can be used to power a load, such as a sensor or communication device.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-253:2023 specifies the information related to diagnostics and maintenance information accessible through memory banks. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange. The information given for light sources in this document is specific to LED light sources.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    53 pages
    English and French language
    sale 15% off

IEC 62386-250:2023 specifies the characteristics of a bus power supply integrated in a control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    21 pages
    English and French language
    sale 15% off

IEC 62386-251:2023 specifies an extension to memory bank 1 to enable asset management functionality. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    21 pages
    English and French language
    sale 15% off

IEC 62386-252:2023 specifies the information related to energy reporting accessible through memory banks in control gear. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange.
This document is only applicable to control gear complying with IEC 62386-102.

  • Standard
    41 pages
    English and French language
    sale 15% off

IEC 62386-150:2023 specifies the minimum requirements for an auxiliary (AUX) power supply that can be used to power a load, such as a sensor or communication device.

  • Standard
    21 pages
    English and French language
    sale 15% off

This part of IEC 62386 is applicable to control gear for control by digital signals of electronic
lighting equipment which is associated with self-contained emergency lighting as described in
IEC 61347-2-7 with additional control interface for configuring emergency operation.
This document is only applicable to control gear complying with IEC 62386-102.
This document does not apply to centrally supplied emergency lighting control gear, which is
specified in IEC 62386-220.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-202:2022 is applicable to control gear for control by digital signals of electronic lighting equipment which is associated with self-contained emergency lighting as described in IEC 61347-2-7 with additional control interface for configuring emergency operation. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  scope updated, hardwired switch operation can be disabled, installation inhibit feature added, memory bank added, modes of operation clarified, with some changes and additions, command added to enter extended emergency mode, command added to extend time in duration test mode.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60598-2-2:2023 specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V. It also specifies requirements for recessed air-handling luminaires for use with a ventilation duct or ventilated space (plenum).
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition (there are no major technical changes, see Annex D):  
The requirements specific to recessed luminaries given in IEC 60598-1 are now incorporated in this Part 2-2.
The requirements for air-handling luminaires given in IEC 60598-2-19 are now incorporated in this Part 2-2.
The references to Part 1 have been updated.

  • Standard
    49 pages
    English language
    sale 15% off

This part of IEC 62386 is applicable to control devices for control by digital signals of electronic lighting equipment.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62386 is applicable to system components in a bus system for control by
digital signals of electronic lighting equipment.
The control methods, algorithms and data exchange methods of application controllers used
for lighting control are not within the scope of the IEC 62386 series. EMC requirements are
not within the scope of the IEC 62386 series.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62386 is applicable to control gear for control by digital signals of electronic lighting equipment.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-102:2022 is applicable to control gear for control by digital signals of electronic lighting equipment. This third edition cancels and replaces the second edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  the scope has been updated; references have been updated; memory bank reading of multi-byte values has been added; memory bank 0 and common memory bank requirements have been updated; reserved memory banks have been updated; non-volatile memory (NVM) save time has been added, and SAVE PERSISTENT VARIABLES removed; version number has been updated; bus unit configuration has been added.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-103:2022 is applicable to control devices for control by digital signals of electronic lighting equipment. This second edition cancels and replaces the first edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  the scope has been updated; quiescent mode has been updated; non-volatile memory (NVM) save time has been added, and SAVE PERSISTENT VARIABLES command removed; memory bank 0 has been modified, and common memory bank requirements have been added; IDENTIFY DEVICE has been updated; version number has been changed; bus unit configuration has been added; and instance types and configuration have been added.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-101:2022 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment. The control methods, algorithms and data exchange methods of application controllers used for lighting control are not within the scope of the IEC 62386 series. EMC requirements are not within the scope of the IEC 62386 series. This third edition cancels and replaces the second edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  the scope has been updated; safety and earthing have been updated and extended; references have been updated; the use of bus-power and external-power has been clarified; polarity sensitivity for bus units including a bus power supply has been updated; frame sizes of 32 bits are no longer reserved.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-202:2022 is applicable to control gear for control by digital signals of electronic lighting equipment which is associated with self-contained emergency lighting as described in IEC 61347-2-7 with additional control interface for configuring emergency operation.
This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:  
scope updated,
hardwired switch operation can be disabled,
installation inhibit feature added,
memory bank added,
modes of operation clarified, with some changes and additions,
command added to enter extended emergency mode,
command added to extend time in duration test mode.

  • Standard
    124 pages
    English and French language
    sale 15% off

IEC 62386-101:2022 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment. The control methods, algorithms and data exchange methods of application controllers used for lighting control are not within the scope of the IEC 62386 series. EMC requirements are not within the scope of the IEC 62386 series. This third edition cancels and replaces the second edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
the scope has been updated;
safety and earthing have been updated and extended;
references have been updated;
the use of bus-power and external-power has been clarified;
polarity sensitivity for bus units including a bus power supply has been updated;
frame sizes of 32 bits are no longer reserved.

  • Standard
    128 pages
    English and French language
    sale 15% off

IEC 62386-102:2022 is applicable to control gear for control by digital signals of electronic lighting equipment. This third edition cancels and replaces the second edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
the scope has been updated;
references have been updated;
memory bank reading of multi-byte values has been added;
memory bank 0 and common memory bank requirements have been updated;
reserved memory banks have been updated;
non-volatile memory (NVM) save time has been added, and SAVE PERSISTENT VARIABLES removed;
version number has been updated;
bus unit configuration has been added.

  • Standard
    161 pages
    English and French language
    sale 15% off

IEC 62386-103:2022 is applicable to control devices for control by digital signals of electronic lighting equipment. This second edition cancels and replaces the first edition published in 2014 and Amendment 1:2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
the scope has been updated;
quiescent mode has been updated;
non-volatile memory (NVM) save time has been added, and SAVE PERSISTENT VARIABLES command removed;
memory bank 0 has been modified, and common memory bank requirements have been added;
IDENTIFY DEVICE has been updated;
version number has been changed;
bus unit configuration has been added; and
instance types and configuration have been added.

  • Standard
    145 pages
    English and French language
    sale 15% off

IEC 62386-104:2019 The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. This part of IEC 62386 applies to a system with wireless or alternative wired communication between its units, instead of a wired bus system, where the meaning of “wireless or alternative wired communication”, or in short “telecommunication”, is any type of communication network different from the wired system described in IEC 62386-101. Where the electronic lighting equipment is covered by the scope of IEC 61347 (all parts), it is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 61820-1:2019 covers principles of design and installation requirements for AGL systems including control, monitoring and transformation of energy, the cables and any electrical component utilized to produce the light intended to be used as a visual aid for air and ground navigation. This document defines in general the fundamental principles to provide safe, reliable and efficient operation of AGL systems independent of the particular system design. Where certain aspects of design are specific to a particular type of system (e.g. series-circuit), these are supplemented in the applicable part.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-220:2019 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This document is applicable to control gear supporting centrally supplied emergency operation as described in EN 50171. This document does not apply to self-contained emergency lighting control gear. These types of control gear are specified in IEC 62386-202.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TS 63117:2021(E) specifies the safety requirements of lighting systems at the system level, applicable when designing a lighting system.
A lighting system comprises a set of products. Safety requirements of the products are not covered in this document, but specified in product safety standards.
NOTE For emergency lighting systems, national or regional regulations provide relevant information that can be firstly consulted.
This document specifies safety requirements for lighting systems based on specific networks.
This document does not cover cyber-security and information security of lighting systems.
This document does not apply to lighting systems to be installed in potential explosive atmospheres which are under the scope of IEC TC 31.
For lighting systems based on an information and communication technology (ICT) network, refer to IEC 62949. For lighting systems based on a home and building electronic system and building automation and control system (HBES/BACS) network, refer to IEC 63044-3.

  • Technical specification
    17 pages
    English language
    sale 15% off

IEC 62386-221:2018 specifies the methodology of demand response which focuses on the curtailment of electric loads during peak demand times thus avoiding the requirement to find new sources of generation capacity. By using load shedding, the lighting system responds to the demands of the energy supply. This document is applicable to control gear supporting the demand response functionality.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-216:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  fast fade time has been redefined; short circuit and open circuit have been deleted; physical selection has been deleted; dimming curve selection has been moved to a separate part; load increase, load decrease and reference measurement have been moved to a separate part; thermal gear and lamp protection have been moved to separate parts; LED module integrated has been moved to a separate part; link to IEC 62386-102 error bits has been clarified; the following commands have been deleted:   ENABLE CURRENT PROTECTOR DISABLE CURRENT PROTECTOR QUERY POSSIBLE OPERATING MODES QUERY SHORT CIRCUIT QUERY OPEN CIRCUIT QUERY CURRENT PROTECTOR ACTIVE QUERY CURRENT PROTECTOR ENABLED QUERY OPERATING MODE

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-333:2018(E) specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-222:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-217:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-224:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62386-218:2018 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to plugs and receptacles for single or multiple pole connecting devices
used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of
IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class
E11 according to IEC 61820-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications. Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series. Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day