2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC

NEW! IEC 61071:2017 is available as IEC 61071:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61071:2017 applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. The document distinguishes between AC and DC capacitors which are considered as components when mounted in enclosures. This document covers an extremely wide range of capacitor technologies for numerous applications, e.g. overvoltage protection, DC and filtering, switching circuits, energy storage, auxiliary inverters, etc. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Introduction of new terms and definitions;
- clarifications for surge discharge test;
- indications for measuring procedure during thermal stability test;
- clarifications for self-healing test;
- clarifications for endurance test;
- clarifications for destruction test;
- update of normative references;
- general editorial review.

The present document specifies technical requirements, limits and test methods for Level Probing Radar (LPR)
equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to
85 GHz for strictly vertical downward installation in outdoor as well as indoor environments.
Level Probing Radars in the scope of the present document consist of a combined transmitter and receiver and are
equipped with an integral or dedicated antenna provided also by the EUT manufacturer. EUTs intended to be equipped
with antennas from third-party manufacturers are not covered by the scope of the present document.
LPR equipment and the related categorization is further specified in clause 4.2.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in Annex A.

The present document specifies technical requirements, limits and test methods for SRD radiodetermination equipment
using Ultra Wide Band (UWB) technology in the frequency ranges from 116 GHz to 148,5 GHz, from 167 GHz to
182 GHz, and from 231,5 GHz to 250 GHz for Level Probing Radar (LPR) and Tank Level Probing Radar (TLPR).
Level Probing Radars and Tank Level Probing Radars consist of a combined transmitter and receiver and are equipped
with an integral or dedicated antenna provided also by the EUT manufacturer. EUTs intended to be equipped with
antennas from third-party manufacturers are not covered by the scope of the present document.
Furthermore, the present document is limited to LPR and TLPR devices with FMCW modulation (see clause C.2.2 of
ETSI EN 303 883-1 [1]).
Further details of the covered LPR and TLPR EUT can be found in clause 4.2 of the present document.
NOTE 1: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.
NOTE 2: Equipment covered by the present document operates in accordance with clause 2.3 and clause 2.5 of
ECC Decision(22)03 [i.3] and the upcoming EC framework for UWB/SRDs for the range 116 GHz to
260 GHz, which is based on the results of ECC Report 334 [i.8]

REN/MSG-TFES-1138

The present document specifies technical requirements, limits and test methods for Short Range Devices in the non-
specific category operating in the frequency range 25 MHz to 1 000 MHz.
The non specific SRD category is defined by the EU Commission Decision 2019/1345/EU [i.3] as:
"The non-specific short-range device category covers all kinds of radio devices, regardless of the application or the
purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses include telemetry,
telecommand, alarms, data transmissions in general and other applications".
These radio equipment types are capable of transmitting up to 500 mW effective radiated power and operating indoor or
outdoor.
NOTE: The relationship between the present document and the essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in Annex A

Identical adoption of future IEC/IEEE 63195-2 into EN IEC/IEEE 63195-2

Identical adoption of future IEC/IEEE 63195-1 into EN IEC/IEEE 63195-1.

The present document specifies technical requirements, limits and test methods for equipment employing UWB for
vehicular access devices installed in motor and railway vehicles in the frequency ranges 3,8 GHz to 4,2 GHz and
6,0 GHz to 8,5 GHz.
These equipment types are intended to be utilized for vehicle access, vehicle immobilization and extended vehicle
access control functionalities (like closing windows or remotely starting the car).
Further details of the covered EUT can be found in clause 4.2.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.

The present document specifies technical characteristics and methods of measurements for the types of equipment:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
2) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA) with NB-IoT.
3) Base Station for NB-IoT standalone.
NOTE: UTRA TDD is not included in Release 17 of ETSI EN 301 908.
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Unless
stated otherwise, requirements specified for the TDD duplex mode apply for downlink and uplink operations in Frame
Structure Type 2. NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28, 31, 41, 42, 43, 65, 72,
87, 88 which are defined in table 1-1.

The present document specifies technical characteristics, limits and methods of measurements for Material Sensing
devices for Building Material Analysis (BMA) below 10,6 GHz.
Additional details of the covered Building Material Analysis (BMA) devices can be found in clause 4.2 of the present
document.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.6] is given in annex A.

The present document specifies technical characteristics and methods of measurements for Short Range Devices (SRD)
in data networks; radio equipment to be used in the frequency bands 865 MHz to 868 MHz and 915,0 MHz to
919,4 MHz.
The present document covers types of devices NAP, master NAP, NN and TN operating indoor and outdoor. These
types are specified in clause 4.2.2 together with related permitted e.r.p.
NOTE 1: The availability of the frequency bands in European Union and CEPT countries can be obtained from the
EFIS (https://efis.cept.org/) and is also listed in Appendices 1 and 3 of ERC/REC 70-03 [i.4].
NOTE 2: It should be noted that, in some countries, part or all of the band 915,0 MHz to 919,4 MHz may be
unavailable, for networked and/or network based short range devices. See National Radio Interfaces
(NRI) as relevant for additional guidance.
NOTE 3: For 25 mW equipment, 917,4 MHz to 919,4 MHz is the core harmonised band according to EC
DEC 2022/172 [i.5].
NOTE 4: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.2] is given in Annex A.

The present document specifies technical characteristics and methods of measurements for the following equipment:
• Multi-Standard Radio capable Base stations (NR, E-UTRA, UTRA, GSM/EDGE, NB-IoT).
NOTE: UTRA TDD is not included in Release 17 of ETSI EN 301 908.
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band
Categories.
The present document covers requirements for multi-RAT capable NR, E-UTRA, UTRA and GSM/EDGE MSR Base
Stations for 3GPP™ Release 9, 10, 11, 12, 13, 14, 15, 16 and 17. This includes the requirements for MSR operating
bands from 3GPP Release 18.
The RF requirements in the present document do not apply for multi-band operation supporting bands for both FDD and
TDD.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of
2014/53/EU [i.1] is given in annex A.

IEC 60825-4:2022 is available as IEC 60825-4:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60825-4:2022 deals with basic issues concerning laser guards, including human access, interlocking and labelling, and gives general guidance on the design of protective housings and enclosures for high-power lasers. Laser guards may also comply with standards for laser protective eyewear, but such compliance is not necessarily sufficient to satisfy the requirements of this document. This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This document applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. In addition, this document indicates
- how to assess and specify the protective properties of a laser guard, and
- how to select a laser guard.

The present document specifies technical characteristics and methods of measurements for Earth Stations on Mobile
Platforms (ESOMP) equipment with the following characteristics:
• The ESOMP is designed for both mobile and stationary operation.
• The ESOMP operates on various mobile platforms such as trains, maritime vessels, aircraft and other vehicles.
• The ESOMP is controlled and monitored by a Network Control Facility (NCF). This function may be
performed centrally (e.g. for a network of ESOMPs with a central hub) or it could be performed within the
ESOMP for autonomous control. The NCF is outside the scope of the present document.
• The ESOMP transmit and receive frequencies are shown in table 1.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.11] is given in annex A.

The present document specifies technical characteristics and methods of measurement for Receive-Only Mobile Earth
Stations (ROMES) radio equipment operating under the Land Mobile Satellite Service (LMSS), in the frequency band
1 518 MHz to 1 559 MHz (space-to-earth band).
The ROMESs operate as part of a satellite system providing one-way data communications.
ROMESs could have several configurations, including:
• either Portable Equipment (PE) or Vehicle Installed Equipment (VIE);
• a number of modules including a display/control interface to the user.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.2] is given in annex A.

IEC 63404:2024 defines radiocommunication related requirements for equipment intended to integrate a radiocommunication device. It includes the initial integration and update of a the radiocommunication device, having a carrier frequency greater than 380 MHz, into new or updated host equipment with:
- The classification of integration categories;
- The EMC immunity verification using a capability profile approach;
- The verification of the unwanted emission level of the radio transceiver.

2021-09-24: This prAA includes common mods to EN 60730-1:2016/A2 (PR=67139)

The present document specifies technical characteristics and methods of measurement for Wireless Access Systems
(WAS) including Radio Local Area Network (RLAN) equipment operating in the 5 GHz RLAN band.
The present document specifies spectrum access requirements to facilitate spectrum sharing with other equipment.
Radio equipment capable of operating in all or parts of the service frequency bands given in table 1 is within the scope
of the present document.
Provisions for radio equipment capable of operating in all or parts of the 5 725 MHz to 5 850 MHz frequency band
(sub-band 4 as given in table B.1) are contained in annex B. However, operation in sub-band 4 is subject to national
frequency usage conditions. The present document also contains provisions for equipment operating on channels whose
nominal channel bandwidth falls partly in sub-band 3 and partly in sub-band 4.
NOTE 1: The technical requirements for equipment operating in the service frequency bands identified in table 1
are contained in the main part of the present document (see clause 4) while the technical requirements for
equipment operating in the service frequency band identified in table B.1 are contained in annex B.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

The present document specifies the applicable test conditions, performance assessment and performance criteria for wireless digital video links operating in the frequency band 1,3 GHz to 50 GHz and the associated ancillary equipment, in respect of electromagnetic compatibility.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standard for the effective use of the radio spectrum, see table 1.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.
NOTE 1: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN IEC 61000-3-2/A2 [i.4] and EN 61000-3-3/A2 [i.5]).
NOTE 2: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.1] is given in annex A.

IEC 61851-24:2023, together with IEC 61851-23, applies to digital communication between a DC EV supply equipment and an electric road vehicle (EV) for control of conductive DC power transfer, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC and a rated output voltage up to 1 500 V DC.
This document also applies to digital communication between the DC EV charging/discharging station and the EV for system A, as specified in Annex A.
The EV charging mode is mode 4, according to IEC 61851-23.
Annex A, Annex B, and Annex C give descriptions of digital communications for control of DC charging specific to DC EV charging systems A, B and C as defined in IEC 61851-23.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Annex A and Annex B have been updated in line with IEC 61851-23:2023 and relevant standards.

IEC 60825-4:2022 is available as IEC 60825-4:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60825-4:2022 deals with basic issues concerning laser guards, including human access, interlocking and labelling, and gives general guidance on the design of protective housings and enclosures for high-power lasers. Laser guards may also comply with standards for laser protective eyewear, but such compliance is not necessarily sufficient to satisfy the requirements of this document. This part of IEC 60825 specifies the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This document applies to all component parts of a guard including clear (visibly transmitting) screens and viewing windows, panels, laser curtains and walls. In addition, this document indicates - how to assess and specify the protective properties of a laser guard, and - how to select a laser guard.

This document gives guidance on the general principles of circular design for fishing gear and aquaculture equipment containing plastics. It specifies the general requirements, recommendations and guidelines for establishing a circular economy for these products.
This document also identifies stakeholders and their relationships in a general context.

This document specifies the requirements for the user manuals and labelling that accompany circular designed fishing gear and aquaculture equipment containing plastics, to ensure traceability and proper management during the lifetime of its components.

This document specifies technical requirements and recommendations for the
components of fishing gear and aquaculture equipment containing plastics.
This document establishes the material principles and processes that enhance
the circularity and recycling of components and the materials comprising the
components, taking into account the impact of such requirements on utility.
The technical requirements for the design of fishing gear and aquaculture
equipment focus on:
- Development and selection of materials and components;
- Manufacture, assembly and disassembly;
- Use and maintenance;
- Repair, re-manufacturing and refurbishment;
- Storage, transport; and
- End-of-life including recycling.
This document excludes design aspects related to enhancement of the
capture of fisheries.

The contents of the Interpretation sheet 1 (2025-04), applying to the English version only, have been included in this copy.

IEC 63404:2024 defines radiocommunication related requirements for equipment intended to integrate a radiocommunication device. It includes the initial integration and update of a the radiocommunication device, having a carrier frequency greater than 380 MHz, into new or updated host equipment with: - The classification of integration categories; - The EMC immunity verification using a capability profile approach; - The verification of the unwanted emission level of the radio transceiver.

This document gives guidance on the general principles of circular design for fishing gear and aquaculture equipment containing plastics. It specifies the general requirements, recommendations and guidelines for establishing a circular economy for these products.
This document also identifies stakeholders and their relationships in a general context.

This document specifies the requirements for the user manuals and labelling that accompany circular designed fishing gear and aquaculture equipment containing plastics, to ensure traceability and proper management during the lifetime of its components.

This document specifies technical requirements and recommendations for the
components of fishing gear and aquaculture equipment containing plastics.
This document establishes the material principles and processes that enhance
the circularity and recycling of components and the materials comprising the
components, taking into account the impact of such requirements on utility.
The technical requirements for the design of fishing gear and aquaculture
equipment focus on:
- Development and selection of materials and components;
- Manufacture, assembly and disassembly;
- Use and maintenance;
- Repair, re-manufacturing and refurbishment;
- Storage, transport; and
- End-of-life including recycling.
This document excludes design aspects related to enhancement of the
capture of fisheries.

NEW!IEC 60335-2-102:2017 is available as IEC 60335-2-102:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60335-2-102:2017 deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard covers the electrical safety and some other safety aspects of these appliances. All safety aspects are covered when the appliance also complies with the relevant standard for the fuel-burning appliance. If the appliance incorporates electric heating sources, safety aspects concerning these electric sources are covered when the appliance also complies with  the relevant part 2 of IEC 60335. Examples of appliances within the scope of this standard are
– central heating boilers;
– commercial catering equipment;
– cooking appliances;
– laundry and cleaning appliances;
– room heaters;
– warm air heaters;
– water heaters.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard deals with the reasonably foreseeable hazards presented by appliances that are encountered by all persons. However, in general, it does not take into account  
– persons (including children) whose
• physical, sensory or mental capabilities; or
• lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary;
This standard does not apply to
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This second edition cancels and replaces the first edition published in 2004 including its Amendment 1 (2008) and its Amendment 2 (2012). This edition constitutes constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a spillage test is introduced for appliances that have a flat surface on which a cup may be placed (15.101); terms and definitions were renumbered and some notes have been converted to normative text or deleted (19.11.2, 22.103). This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-102 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1
through 1-5.
E-UTRA NB-IoT is designed to operate in the E-UTRA operating bands 1, 3, 8, 20, 28 and 65 defined in table 1-1. The
present document covers requirements for E-UTRA FDD and E-UTRA TDD User Equipment from 3GPP™ Releases 8,
9, 10, 11, 12, and 13 defined in ETSI TS 136 101 [3]. This includes the requirements for E-UTRA UE operating bands
and E-UTRA CA operating bands from 3GPP™ Release 13 defined in ETSI TS 136 101 [3].
NOTE 2: For Band 20:
 For user equipment designed to be mobile or nomadic, the requirements in the present document
measured at the antenna port also show conformity to the corresponding requirement defined as
Total Radiated Power (TRP), as described in Commission Decision 2010/267/EU [i.6] and ECC
Decision (09)03 [i.7].
 For user equipment designed to be fixed or installed, the present document does not address the
requirements described in Commission Decision 2010/267/EU [i.6] and ECC Decision (09)03 [i.7].
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

The present document applies to the following radio equipment type:
• User Equipment for New Radio (NR).
Requirements throughout the present document are in many cases defined separately for different Frequency Ranges
(FRs). The frequency ranges in which NR can operate according to this version of the present document are identified
as described in Table 1-1.
The present document covers requirements for 5G NR User Equipment from 3GPP™ Release 15 defined in ETSI
TS 138 101-1 [6], ETSI TS 138 101-2 [7], ETSI TS 138 101-3 [8]. This includes the requirements for 5G NR UE
operating bands and 5G NR UE CA operating bands from 3GPP™ Release 15 defined in ETSI TS 138 101-1 [6],
ETSI TS 138 101-2 [7], ETSI TS 138 101-3 [8]. Additionally, it includes requirements for selected NR operating bands
from 3GPP Release 16.

The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Technical specifications related to the antenna port of radio equipment, radiated emissions from the enclosure port of
radio equipment, and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
NOTE 1: The relationship between the present document and the essential requirements of article 3.1(b) of
Directive 2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 3: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN 61000-3-2 [i.14] and EN 61000-3-3 [i.15]).

IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications.
The general requirements for instrument transformers for applications in LV systems (nominal voltage ≤ 1 kV AC or ≤ 1,5 kV DC) are covered by IEC 61869-201.
This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard.
This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation.
This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7.
IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869 6:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) merger with IEC 61869-6:2016;
b) new scope: equipment for HV applications with a nominal voltage > 1 kV AC or 1,5 kV DC;
c) new classification of some special tests as type tests or routine test;
d) additional type tests, additional special tests and new clause for commissioning tests;
e) new annexes E, F, G and I.

The present document applies to terrestrial wireless digital video link equipment operating in the frequency band
1,3 GHz to 50 GHz. The present document does not apply to transmitter equipment where the output power exceeds
10 W. Equipment with an integral antenna is also excluded.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.

IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications. The general requirements for instrument transformers for applications in LV systems (nominal voltage ≤ 1 kV AC or ≤ 1,5 kV DC) are covered by IEC 61869-201. This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard. This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation. This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7. IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869 6:2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) merger with IEC 61869-6:2016; b) new scope: equipment for HV applications with a nominal voltage > 1 kV AC or 1,5 kV DC; c) new classification of some special tests as type tests or routine test; d) additional type tests, additional special tests and new clause for commissioning tests; e) new annexes E, F, G and I.

2021-09-24: This prAA includes common mods to EN 60730-1:2016/A2 (PR=67139)

IEC 60703-1:2022 applies to automatic electrical controls for use in, on, or in association with equipment for household appliance and similar use. This document applies to - the inherent safety of automatic electrical controls, and - functional safety of automatic electrical controls and safety related systems, - controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, - the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment.

The present document specifies technical characteristics and methods of measurements for broadband and wideband
data transmission system equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
broadband and wideband data transmission systems as detailed in table 1.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document

This document specifies common security requirements for internet-connected radio equipment. This document provides technical specifications for radio equipment, which concerns electrical or electronic products that are capable to communicate over the internet, regardless of whether these products communicate directly or via any other equipment.

Common security requirements for radio equipment processing personal data or traffic data or location data being either internet connected radio equipment, radio equipment designed or intended exclusively for childcare; toys and wearable radio equipment. The standard provides technical specifications for radio equipment processing personal data, traffic data or location data, which concerns electrical or electronic products that are capable to communicate over the internet, regardless of whether these products communicate directly or via any other equipment, childcare, toys or wearable radio equipment.
The scope does not apply to 5G network equipment used by providers of public electronic communications networks and publicly available electronic communications services within the meaning of in Directive (EU) 2018/1972 of the European Parliament and of the Council as defined in that Regulation.

Common security requirements for internet connected radio equipment that equipment enables the holder or user to transfer money, monetary value or virtual currency. This document provides technical specifications for radio equipment processing virtual money or monetary value, which apply to electrical or electronic products that are capable to communicate over the internet, regardless of whether these products communicate directly or via any other equipment.

The present document specifies technical characteristics and test methods to be used in the conformance assessment of
wideband data transmission Short Range Device (SRD) network access point equipment in the frequency range
863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz. The wideband data transmission device category covers radio
devices that use wideband modulation techniques to access the spectrum. The present document specifies technical
characteristics and methods of measurements for equipment operated in the following designated frequency bands given
in Table 1-1. In the designated bands the following types of equipment are defined:
Type 1: Wideband Data Transmission Network Access Point (NAP) in data networks in 863,0 MHz to
868,0 MHz.
Type 2: Wideband Data Transmission Master Network Access Point (NAP) in data networks in 915,8 MHz to
919,4 MHz and in 917,4 MHz to 919,4 MHz.
Type 3: Wideband Data Transmission Network Access Point (NAP) in data networks in 915,8 MHz to 919,4 MHz
and in 917,4 MHz to 919,4 MHz.
NOTE 1: The availability of the frequency bands for type 2 and type 3 equipment in the European Union and CEPT
countries can be obtained from EFIS (https://efis.cept.org/) and is also listed in Appendices 1 and 3 of
CEPT/REC 70-03 [i.2].
In addition, it should be noted that, in some countries, part or all of the bands for type 2 and type 3
equipment may be unavailable, and/or other frequency bands may be available, for networked and/or
network based short range devices. See National Radio Interfaces (NRI) as relevant for additional guidance.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given Annex A.

The present document specifies technical characteristics and test methods to be used in the conformance assessment of
wideband data transmission Short Range Device (SRD) terminal node equipment in the frequency range 863 MHz to
868 MHz and 915,8 MHz to 919,4 MHz. The wideband data transmission device category covers radio devices that use
wideband modulation techniques to access the spectrum. The present document specifies technical characteristics and
methods of measurements for equipment operated in the following designated frequency bands given in Table 1-1.
In the designated bands the following types of equipment are defined:
Type 1: Wideband Data Transmission Terminal Node (TN) in data networks in 863,0 MHz to 868,0 MHz.
Type 2: Wideband Data Transmission Terminal Node (TN) in data network in 915,8 MHz to 919,4 MHz and in
917,4 MHz to 919,4 MHz:
1) Type 2a: Nomadic Terminal Node (TN) of Type 2 or Mobile Terminal Node (TN) of Type 2.
NOTE 1: The availability of the frequency bands for type 2 equipment in the European Union and CEPT countries
can be obtained from EFIS (https://efis.cept.org/) and is also listed in Appendices 1 and 3 of
CEPT/ERC/REC 70 03 [i.2].
In addition, it should be noted that, in some countries, part or all of the bands for type 2 equipment may
be unavailable, and/or other frequency bands may be available, for networked and/or network based short
range devices. See National Radio Interfaces (NRI) as relevant for additional guidance.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given annex A.