91.160.10 - Interior lighting

This document specifies requirements for the commissioning of lighting systems in buildings to meet design specifications. This document presents details of the commissioning of lighting systems without focusing on the technical characteristics of specific components. This document can be applied to new installations of non-residential buildings and public spaces of multi-residence buildings. This document does not cover the commissioning of lighting systems concerning the electrical power conne...view more

ISO/CIE 8995-3:2018 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places.

NEXT ACTION: CCMC to finalize publication
2019-11-13 PeC: BT approved the publication
2019-03-21 - GEM - TC discussed with consultant (C. Maes) at meeting (MArch 2019) - comments accepted - Annex ZA to be dated. Project has normative refverence to PR=63474, which creates a dependency.
2019-02-28 PC: to be flagged for LVD citation when ready
2018-12-17 PC: "Lack of compliance" for LVD, undated references in the Annex ZA and some points in the standards should be clarified
2017-11-21 - Neg...view more

This European Standard contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport railway rolling stock under all operating and emergency conditions. This European Standard does not address lighting installed in instruments or controls.

This European Standard contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. Metro Systems, Trams, Light Rail, and Local Rail Systems, under all operating and emergency conditions.
This European Standard also defines the requirements for testing and conformity assessment.
This European Standard does not address lighting installed in instruments or controls.
Th...view more

This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport heavy rail units, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requirements for testing and conformity assessment.
This document does not address lighting installed in in...view more

This document contains performance requirements and recommendations for electrical lighting systems in the interiors of public transport urban rail vehicles, as defined in the CEN-CENELEC Guide 26, i.e. metro systems, trams, light rail, and local rail systems, under all operating and emergency conditions.
This document applies only to new units.
The application of this document for retro-fitting of existing units is subject to agreement between Contractors.
This document also defines the requ...view more

This document specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination inside non-residential buildings and for calculating or measuring the amount of energy required or used for lighting inside buildings. This document does not cover lighting requirements, the design of lighting systems, the planning of lighting installations, the characteristics of lighting equipment (lamps, control gear and luminaires) and systems used for display ...view more

ISO/CIE 8995-3:2018 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places.

This standard specifies the calculation methodology for the evaluation of the amount of
energy used for lighting in the building and provides the numeric indicator for lighting energy
requirements for certification purpose. This standard can be used for existing buildings and
for the design of new or renovated buildings. This standard will also provide methodology for
the calculation of electric power requirement for new lighting installations and for the
calculation of dynamic lighting energy d...view more

This Technical Report will provide information to support the correct understanding, use and
national implementations of EN 15193–1. It will give explanations on the procedures and
background information. It will also provide justifications of the choices that have been made
and give validations of the calculation procedures given in the standards. It will give detailed
examples to illustrate the total workings of the standard.

This standard specifies the methodology for evaluating the energy performance of lighting systems for providing general illumination in residential and non-residential buildings and for calculating or measuring the amount of energy required or used for lighting in buildings. The method may be applied to new, existing or refurbished buildings. It also provides a methodology (LENI) as the measure of the energy efficiency of the lighting installations in buildings.
This standard does not cover lig...view more

TC - update to annex ZA

IEC corrigendum

IEC Corrigendum only

This part of IEC 60598 specifies requirements for emergency luminaires for use with electrical
lamps on emergency power supplies not exceeding 1 000 V.
This part does not cover the effects of non-emergency voltage reductions on luminaires
incorporating high pressure discharge lamps.
This part gives general requirements for emergency lighting equipment.
This part continues to use the term “lamp” which also includes “light source(s)" where
appropriate.

This International Standard specifies requirements and test methods for operating lights used in the
dental office and intended for illuminating the oral cavity of patients. It also contains specifications on
manufacturers’ instructions for use, marking and packaging.
This International Standard applies to operating lights, irrespective of the technology of the light source.
This International Standard excludes auxiliary light sources, e.g. from dental handpieces and dental
headlamps and al...view more

CEN/TS 16163 defines the procedures as well as the means to implement adequate lighting, with regard to the conservation policy. It takes visual, exhibition and conservation aspects into account and it also discusses the implications of the lighting design on the safeguarding of cultural property. This Technical Specification gives recommendations on values of minimum and maximum illumination levels. It aims to provide a tool for setting up a common European policy and a guide to help curators, ...view more

EN 12464-2 specifies lighting requirements for outdoor work places, which meet the needs for visual comfort and performance. All usual visual tasks are considered. This European Standard is not applicable for emergency lighting; see EN 1838 and EN 13032-3. This European Standard does not specify lighting requirements with respect to the safety and health of workers at work and has not been prepared in the field of application of Article 153 of the EC treaty, although the lighting requirements, a...view more

This European Standard specifies the luminous requirements for emergency escape lighting and standby lighting systems installed in premises or locations where such systems are required. It is principally applicable to locations where the public or workers have access.