29.140 - Lamps and related equipment
ICS 29.140 Details
Lamps and related equipment
Lampen. Lampenzubehor
Lampes et accessoires
Žarnice in pribor
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 29.140 - Lamps and related equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- Draft8 pagesEnglish languagesale 10% offe-Library read for1 day
IEC TR 63633:2025 provides information on safety related aspects relevant for the design and application of LED lamps that can be used as a replacement for lamps of different technology (for example, incandescent, fluorescent or HID).
- Technical report6 pagesEnglish languagesale 15% off
IEC 60598-2-1:2025 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V. This third edition cancels and replaces the second edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The clause numbers and structure have been aligned with those of IEC 60598‑1.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard14 pagesEnglish and French languagesale 15% off
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices.
This document is only applicable to control devices complying with IEC 62386‑103.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard20 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current of single and/or multiple lighting products of the same type. Lighting products include the following:
- light sources with integrated controlgear,
- controlgear,
- luminaires.
- Standard42 pagesEnglish languagesale 15% off
- Standard37 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Standard12 pagesEnglish and French languagesale 15% off
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices. This document is only applicable to control devices complying with IEC 62386‑103.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices.
This document is only applicable to control devices complying with IEC 62386‑103.
- Standard15 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard31 pagesEnglish and French languagesale 15% off
IEC 61995-2:2025, which is used in conjunction with IEC 61995‑1:2025, applies to devices for the connection of luminaires (DCL) 250 V AC, 6 A intended for household and similar purposes, for the electrical connection of fixed luminaires. It defines an interface design as specified in the given standard sheets.
This second edition cancels and replaces the first edition published in 2009 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) technical requirements related to the force required to withdraw the plug have been moved to IEC 61995-1;
b) alignment with new edition of IEC 61995-1.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
- Standard18 pagesEnglish and French languagesale 15% off
IEC 61995-1:2025 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires of class I or class II to final circuits rated at not more than 16 A without mechanical support for the luminaires incorporated in the plug/outlet interface. The DCL retention mechanisms are not intended to support the weight of the luminaires.
This second edition cancels and replaces the first edition published in 2005 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) additional requirements and tests for additional suspension means;
b) additional requirements and tests for additional functions;
c) additional requirements and tests for floating type DCLs;
d) introduction of insulation piercing terminals (IPT);
e) additional classification according to the connection capacities of the DCL outlet terminals;
f) modification of maximum withdrawal force for plugs with enabled locking means;
g) improvements of temperature rise tests.
- Standard86 pagesEnglish languagesale 15% off
- Standard89 pagesFrench languagesale 15% off
- Standard175 pagesEnglish and French languagesale 15% off
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard4 pagesEnglish and French languagesale 15% off
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
IEC PAS 63629:2025 sets out the specific rules for luminaires and defines the product specifications to be adopted by manufacturers in the development of their Product Environmental Profiles (PEP) particularly with regard to:
- the technology and its type of application,
- the conventional typical lifetime taken into account for the Life Cycle Assessment (LCA),
- the conventional use scenarios to be adopted during the product use stage.
- Technical specification127 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.
- Standard25 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 62868-2-1:2020 specifies safety requirements for semi-integrated organic light emitting diode modules operating with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power and have a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.
- Standard21 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment9 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62868-2-4:2025 specifies the safety requirements for rigid organic light emitting diode (OLED) tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard37 pagesEnglish and French languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment9 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62868-2-4:2025 specifies the safety requirements for rigid organic light emitting diode (OLED) tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62868-2-3:2021 specifies the safety requirements for flexible organic light emitting diode tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes and designed for being bent during the manufacturing process of curved luminaires.
- Standard31 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish and French languagesale 15% off
IEC 62868-1:2020 specifies general safety requirements of OLED products for use on DC supplies up to 1000 V or AC supplies up to 1000 V at 50 Hz or 60 Hz for indoors and similar general lighting purposes.
This document applies to any OLED light sources which are not covered by IEC 62868-2 (all parts).
This first edition cancels and replaces IEC 62868 published in 2014.
- Standard47 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish and French languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off
IEC 62868-2-4:2025 specifies the safety requirements for rigid organic light emitting diode (OLED) tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes.
- Standard20 pagesEnglish and French languagesale 15% off
IEC 62554:2011 specifies sample preparation methods for determining mercury levels in new tubular fluorescent lamps (including single capped, double capped, self-ballasted and CCFL for backlighting) containing 0,1 mg mercury or more. The intended resolution of the methods described in this standard is of the order of 5 %. Mercury level measurement of spent lamps is excluded, as during lamp operation, mercury gradually diffuses into the glass wall and reacts with the glass materials. The test method of this standard does not recover mercury that is diffused into or reacted with or otherwise incorporated irreversibly with the glass wall of discharge tubes. This standard does not contain information on measurement. Measurement is specified in IEC 62321.
- Standard44 pagesEnglish languagesale 15% off
- Standard42 pagesEnglish and French languagesale 15% off
- Standard86 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 62386-105:2024 applies to control gear and control devices for control by digital signals of electronic lighting equipment. Typically, a bus unit according to the IEC 62386 series contains firmware. There are circumstances where it can be necessary to change the firmware after production or shipping of the product, for example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless, the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system be considered in detail. This second edition cancels and replaces the first edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) several commands have been modified, renamed and added;
b) variables have been modified and added;
c) recommendations for implementation within emergency control gear have been added;
d) requirements for block acceptance have been changed;
e) example process-flow diagrams have been added;
f) requirements for restarting and power-on have been changed.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62386-105:2024 applies to control gear and control devices for control by digital signals of electronic lighting equipment. Typically, a bus unit according to the IEC 62386 series contains firmware. There are circumstances where it can be necessary to change the firmware after production or shipping of the product, for example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless, the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system be considered in detail. This second edition cancels and replaces the first edition published in 2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) several commands have been modified, renamed and added; b) variables have been modified and added; c) recommendations for implementation within emergency control gear have been added; d) requirements for block acceptance have been changed; e) example process-flow diagrams have been added; f) requirements for restarting and power-on have been changed.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60598-1:2024 specifies general safety requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. Requirements for semi-luminaires are included in this document.
This tenth edition cancels and replaces the ninth edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) new structure to comply with the ISO/IEC Directives, Part 2;
b) addition of a new Annex V for comparison with the previous edition;
c) revision of 7.32 for SPDs and for SPCs;
d) the terms "live part" and "active part" were reviewed and aligned with the definitions of "live part" and "hazardous live part" given in IEC 60050-195;
e) revision of 7.14.2 for conductor mechanical stress;
f) revision of 14.5.2, Item 4 to include controlgear;
g) revision of 9.2.1 (Earthing) with the deletion of the word "permanently";
h) revision of Annex N: earth continuity test time;
i) revision of 7.11.4; 7.14.1; Table 22 (14.4.3): Introduction of requirements for suspension by magnets;
j) addition of a new Annex W for luminaires using batteries;
k) clarification of Clause 6 for marking requirements for nature of supply;
l) addition of a new Subclause 7.31.5: Additional requirements for luminaires using controllable controlgear providing SELV output(s);
m) revision of 6.4.16: Information to be provided for luminaire having protective earth current > 10 mA;
n) revision of 6.3.23; 6.4.18; 6.4.24; 7.30 and 10.2.1 for serviceable, non-user serviceable and non-serviceable components;
o) revision of Annex D: Draught-proof enclosure;
p) revision of 8.2.1 and 13.2.1: Inconsistencies in the inclusion of the limits of voltage ranges;
q) revision of 9.2.10 for looping-in;
r) Revision of Clause 2 and 7.8: update of the reference to IEC 61058-1-1, IEC 61058-1-2 and IEC 6105821. Update of temperature limits in Table 21 (14.4.3) for luminaires incorporating switches according to IEC 60669-1 or IEC 60669-2-1;
s) revision of 6.3.22 and 7.24 for photobiological safety;
t) addition of a new Subclause 6.3.27 for marking of mains socket outlet moved from information requirements.
- Standard254 pagesEnglish languagesale 10% offe-Library read for1 day
2022-01-12: This prAA includes common mods to prEN IEC (PR=71577)
- Amendment25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-13:2024 specifies safety requirements for electronic controlgear for LED light sources for use on DC supplies up to 1 500 V or on AC supplies up to 1 000 V at 50 Hz or 60 Hz.
This document is applicable for electronic controlgear for LED light sources with an output voltage (RMS) not higher than 1 000 V.
This third edition cancels and replaces the second edition published in 2014 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with respect to the fourth edition of IEC 61347-1:
- introduction of dated references to the fourth edition of IEC 61347-1 as appropriate;
- deletion of the clauses and subclauses which are either no longer relevant or now covered in IEC 61347-1;
b) update of normative references, introducing dated references where appropriate;
c) scope extension to 1 500 V for direct current;
d) scope clarification;
e) deletion of unused definitions;
f) revision of information and marking requirements;
g) new marking requirement "electronic controlgear for LED light sources";
h) new requirements for electronic controlgear for LED light sources with constant light output function or programmable current (additions to Clause 3, Clause 6, Clause 16 and Clause 18);
i) modification of requirements for the determination of the output working voltage (new Clause 17);
j) new requirements for the determination of the rated output characteristics (Clause 18).
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-12:2024 is available as IEC 61347-2-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61347-2-12:2024 specifies safety requirements for electronic controlgear for use on AC supplies at 50 Hz or 60 Hz up to 1 000 V or DC supplies up to 1 000 V. The type of controlgear is a convertor that can contain igniting and stabilizing elements for operation of a discharge lamp under direct current or at a frequency that can deviate from the supply frequency.
This second edition cancels and replaces the first edition published in 2005 and Amendment 1:2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of dated references where appropriate;
b) clarification of sample item numbers;
c) addition of new information requirements (items v), w) and x) of IEC 61347-1:2015, 7.1 and IEC 61347-1:2015/AMD1:2017, 7.1).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-10:2024 is available as IEC 61347-2-10:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61347-2-10:2024 specifies safety requirements for electronic controlgear for high-frequency operation of tubular cold-cathode discharge lamps used in signs and luminous discharge tube installations and operating with an output voltage exceeding 1 000 V but not exceeding 10 000 V for direct connection to DC or AC supply voltages not exceeding 1 000 V (at 50 Hz or 60 Hz in case of alternating current). This second edition cancels and replaces the first edition published in 2000 and Amendment 1:2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of dated references as appropriate;
b) clarification of sample item numbers.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-2:2024 specifies safety requirements for electronic step-down convertors for use on DC supplies of up to 1 500 V or AC supplies of up to 1 000 V at 50 Hz or 60 Hz, and with a rated output voltage ≤ 50 V (RMS) at a frequency deviating from the supply frequency, or 120 V ripple free DC between conductors and between any conductor and earth, associated with tungsten-halogen lamps as specified in IEC 60357, and other filament lamps.
This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with respect to the fourth edition of IEC 61347-1;
- introduction of dated references to the fourth edition of IEC 61347-1 as appropriate;
- deletion of the clauses and subclauses which are either no longer relevant or now covered in IEC 61347-1;
b) scope extension to 1 500 V for direct current;
c) scope clarification;
d) deletion of unused definitions;
e) revision of information and marking requirements;
f) revision of compliance conditions for the measurement of the output voltage during fault condition testing and during thermal testing.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-11:2024 specifies safety requirements for miscellaneous electronic circuits used with luminaires for use on DC supplies up to 1 500 V or on AC supplies up to 1 000 V at 50 Hz or 60 Hz.
This second edition cancels and replaces the first edition published in 2001 and Amendment 1: 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with respect to the fourth edition of IEC 61347-1:
- introduction of dated references to the fourth edition of IEC 61347-1 as appropriate;
- deletion of clauses and subclauses which are either no longer relevant or now covered in IEC 61347-1;
b) scope extension to 1 500 V for direct current;
c) scope clarification;
d) revision of information and marking requirements;
e) addition of requirements for the determination of the output working voltage (new Clause 17).
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61347-2-8:2024 is available as IEC 61347-2-8:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61347-2-8:2024 specifies safety requirements for ballasts, excluding resistance types, for use on AC supplies up to 1 000 V at 50 Hz or 60 Hz, associated with fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated powers, dimensions and characteristics as specified in IEC 60081 and IEC 60901. This second edition cancels and replaces the first edition published in 2000 and Amendment 1:2006. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of dated references where appropriate;
b) alignment of clause numbers with those of IEC 61347-1.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day