SC 34B - Fit systems for light sources

IEC 61184:2017 This document applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V.
This document also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only.
This fourth edition cancels and replaces the third edition published in 2008 and Amendment 1:2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Restructuring of the standard in accordance with IEC Directives Part 2.
b) Clause 18: Update on creepage distances and clearances;
c) Addition of Annex B.

IEC 60400:2017 states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders.
This eighth edition cancels and replaces the seventh edition published in 2008, Amendment 1:2011 and Amendment 2:2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- alignment with ISO/IEC drafting rules;
- renumbering of clauses, tables and figures.
This bilingual version (2017-12) corresponds to the monolingual English version, published in 2017-06.
The French version of this standard has not been voted upon.

IEC 60838-1:2016 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This fifth edition cancels and replaces the fourth edition published in 2004, Amendment 1:2008 and Amendment 2:2011. This edition constitutes a technical revision. The significant technical changes in this edition with respect to the previous edition include the introduction of new or revised requirements for single and dual contact ignition voltages, steel test caps and brass test caps and an Annex E listing amended requirements/clauses which require products to be retested.

IEC 60238:2016 applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires only. It also applies to switched-lampholders for use in AC circuits only, where the working voltage does not exceed 250 V r.m.s. This ninth edition cancels and replaces the eighth edition published in 2004, Amendment 1: 2008 and Amendment 2:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of a pull test for certain E5 and E10 lampholders.
b) Annex D listing amended requirements/clauses which require products to be retested.

The contents of the corrigendum of November 2017 have been included in this copy.

The contents of the corrigendum of January 2018 have been included in this copy.

This consolidated version consists of the first edition (1990)    and its amendment 1 (1997). Therefore, no need to order amendment in addition to this publication.

Standardizes the methods, general dimensions and preferred tolerances for the taping of these components, for example, resistors, capacitors, diodes, etc., for use in telecommunication equipment and electronic devices employing similar assembly techniques.