47.060 - Inland navigation vessels
ICS 47.060 Details
Inland navigation vessels
Binnenschiffe
Navires fluviaux
Jezerska in rečna plovila
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 47.060 - Inland navigation vessels
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies requirements for methanol bunkering transfer systems to and from inland navigation vessels. The various scenarios for the bunker facility operator concern land, truck and vessel (barge). It concerns design, dimensions and technical requirements for the transfer of methanol, including the nozzle, connection, inner and outer flanges and failsafe features.
This document also specifies the process and procedures for the bunkering operations, as well as responsibilities and risk assessment scope, taking into consideration the specific hazards in handling and bunkering methanol fuel. Next to this, the requirement for the methanol provider to provide a bunker delivery note and training and qualification of personnel involved.
This document is not applicable to cargo operations.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for methanol bunkering transfer systems to and from inland navigation vessels. The various scenarios for the bunker facility operator concern land, truck and vessel (barge). It concerns design, dimensions and technical requirements for the transfer of methanol, including the nozzle, connection, inner and outer flanges and failsafe features.
This document also specifies the process and procedures for the bunkering operations, as well as responsibilities and risk assessment scope, taking into consideration the specific hazards in handling and bunkering methanol fuel. Next to this, the requirement for the methanol provider to provide a bunker delivery note and training and qualification of personnel involved.
This document is not applicable to cargo operations.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to gangways for passenger vessels for inland navigation. It specifies the type, main dimensions and test conditions that can be observed for safety reasons.
NOTE A gangway serves as walkway between the passenger vessel and the shore.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies to gangways for passenger vessels for inland navigation. It specifies the type, main dimensions and test conditions that can be observed for safety reasons.
NOTE A gangway serves as walkway between the passenger vessel and the shore.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to small floating working machines used for work in, over, or on, inland waters. This document specifies safety-related requirements and test methods. This document specifies minimum requirements for small floating working machines with a length of 3, with temporarily or permanently installed work equipment or machines used on inland waters. These small floating working machines can be used for activities such as extraction work, lifting work, sampling, mowing and clearing work or comparable tasks.
- Standard44 pagesEnglish languagesale 15% off
This document is applicable to railings for decks and in gangways on inland navigation vessels. It lays down design, dimensions, strength and test conditions which have to be observed for safety reasons. The railings provide protection for persons against falling overboard and from one deck to another.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the safety requirements for walkways and working places on inland navigation vessels in the areas used for work.
Walkways in the passenger area are governed by requirements which are outside the scope of this document.
Requirements related to the marking of safety and health protection are not covered by this document.
This document specifies safety requirements for walkways and working places within the meaning of European Parliament and Council Directive (EU) 2016/1629 of 14 September 2016 laying down technical requirements for inland waterway vessels.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the safety requirements for walkways and working places on inland navigation vessels in the areas used for work.
Walkways in the passenger area are governed by requirements which are outside the scope of this document.
Requirements related to the marking of safety and health protection are not covered by this document.
This document specifies safety requirements for walkways and working places within the meaning of European Parliament and Council Directive (EU) 2016/1629 of 14 September 2016 laying down technical requirements for inland waterway vessels.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for boarding stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height of around 3,0 m above the light water-line.
Boarding stairs are not intended for use by passengers.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs according to EN 1502 are not sufficient in length. This range starts at a boarding height of approximately at 2,8 m above the light water-line.
Outboard ladders are not intended for use by passengers.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61108-6:2023 specifies the minimum performance requirements, methods of testing and required test results for the Indian regional satellite system (IRNSS) shipborne receiver equipment, based on IMO resolution MSC.449(99), which uses the signals from IRNSS in order to determine position.
This document takes account of the general requirements given in IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this document is different from IEC 60945, the requirement in this document takes precedence. This document also takes into account, as appropriate, requirements for the presentation of navigation-related information on shipborne navigational displays given in IMO resolution MSC.191(79) and is associated with IEC 62288. This document further takes into account, as appropriate, requirements for bridge alert management given in IMO resolution MSC.302(87) and is associated with IEC 62923-1.
This document applies to navigation in ocean waters for the standard positioning service and harbour entrances, harbour approaches and coastal waters, as defined in IMO resolution A.1046(27) within IRNSS/NavIC coverage area.
- Standard37 pagesEnglish languagesale 15% off
This document is applicable to outboard ladders for inland navigation vessels. Outboard ladders are used on inland navigation vessels having great side heights to facilitate safe climbing into ship's boats, safe disembarking or safe crossing over onto vessels in the case of significantly different boarding heights.
This document specifies safety requirements on design, dimensions and strength and test conditions for outboard ladders.
Outboard ladders are intended for that range where boarding stairs according to EN 1502 are not sufficient in length. This range starts at a boarding height of approximately at 2,8 m above the light water-line.
Outboard ladders are not intended for use by passengers.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to boarding stairs for inland navigation vessels. Boarding stairs are used on inland navigation vessels for a safe transition into ship's boats, safe disembarking to the shore or a safe crossing over onto vessels with lower decks.
This document specifies safety requirements on the design, dimensions and strength and test methods for boarding stairs.
Boarding stairs are designed for vessels having a boarding height greater than 1,5 m above the light water-line. They can be used up to a height of around 3,0 m above the light water-line.
Boarding stairs are not intended for use by passengers.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies terms and definitions relating to inland navigation vessels shaftings, with the aim of providing clear definitions which can be understood by all specialists. This document is applicable only to equipment which is used for the vessels being used for the inland navigation. The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise. A combination of terms is allowed in application.
- Standard5 pagesEnglish languagesale 15% off
This document describes a rake method with a boat for removing nuisance rooting aquatic plants and for managing their growth. It also describes the requirements for this method, and sets out how work should be carried out in the field.
The rake method can be used for inland waterways with a depth of 0.6 m or more.
- Standardization document18 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes a rake method with a boat for removing nuisance rooting aquatic plants and for managing their growth. It also describes the requirements for this method, and sets out how work should be carried out in the field.
The rake method can be used for inland waterways with a depth of 0.6 m or more.
- Standardization document18 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidelines for the preparation of a safety rota and safety plans on passenger vessels for inland navigation. It supports the safety organization on board. Furthermore, it describes the code of conduct necessary for passengers on cabin vessels. Annex B contains an example of a safety rota, a safety plan and a code of conduct for passengers, respectively.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidelines for the preparation of a safety rota and safety plans on passenger vessels for inland navigation. It supports the safety organization on board. Furthermore, it describes the code of conduct necessary for passengers on cabin vessels. Annex B contains an example of a safety rota, a safety plan and a code of conduct for passengers, respectively.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
IEC PAS 61174-1:2021 specifies requirements, methods of testing and required test results for route plan exchange format (RTZ).
This PAS has been developed to improve interoperability between equipment implementing route plan exchange format by addressing issues uncovered in the original RTZ specification (Annex S of IEC 61174:2015), and in recognition of the fact that some manufacturers have identified a pressing business need to implement an improved and expanded version of the RTZ format.
It is intended to complement the original RTZ specification. This PAS provides a revised version 1.2 of the RTZ schema but retains the original version 1.0 of the schema unchanged. The intention is that compliance with this PAS can be achieved without compromising compliance with IEC 61174:2015.
- Technical specification52 pagesEnglish languagesale 15% off
IEC PAS 63343:2021 specifies technical requirements, methods of test and required test results for equipment implementing ASM part of the VHF Data exchange system (VDES) as defined in ITU-R M.2092.
- Technical specification73 pagesEnglish languagesale 15% off
This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels.
Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document.
It also gives rules for designation and testing.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for electrical installations for the shore supply of berthing inland navigation vessels with electrical energy, three-phase current 400 V, 50 Hz with a rated current of up to 125 A.
This document applies to the supply of inland navigation vessels in ports and moorings for commercial inland navigation.
This document specifies general requirements and contains information on the billing procedure.
For the supply of small craft and houseboats in marinas and similar installations the requirements of HD 60364-7-709 apply.
For electrical shore connections with a current rating more than 125 A, which are suitable for passenger ships with hotel operation, EN 16840 applies.
The requirements for the HD 60364 series and HD 384 series generally apply to low-voltage systems on shore. A detailed list of the relevant parts is given in the Bibliography.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies in connection with EN 15869 1 for the supply of berthed inland navigation vessels with electrical energy from shore.
This document specifies additional requirements for the shore connection cable and the feeding unit of the electrical shore connection.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the required characteristics for two types a heat-shrinkable, fluoroelastomer sleeving for use in aircraft electrical systems at operating temperatures between -55 °C and 200 °C.
Type A Thick wall
Type B Thin wall
This sleeving has good flexibility, is flame retarded and has a thick wall for mechanical protection. It is for use in areas subject to prolonged contamination by aircraft fuel and fluids with the exception of phosphate ester-based hydraulic fluids. The standard colour is black.
These sleevings are normally supplied with internal diameters up to 50 mm for shrink ratios of 2:1. They are available in black only.
Sizes other than those specifically listed in this standard may be available. These items shall be considered to comply with this standard if they comply with the property requirements listed in Tables 2, 3 and 4 except for dimensions and mass.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels.
Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document.
It also gives rules for designation and testing.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists. This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil. The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise. A combination of terms is allowed in application.
- Standard22 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels. Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document. It also gives rules for designation and testing.
- Standard15 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This document specifies requirements for electrical installations for the shore supply of berthing inland navigation vessels with electrical energy, three-phase current 400 V, 50 Hz with a rated current of up to 125 A.
This document applies to the supply of inland navigation vessels in ports and moorings for commercial inland navigation.
This document specifies general requirements and contains information on the billing procedure.
For the supply of small craft and houseboats in marinas and similar installations the requirements of HD 60364-7-709 apply.
For electrical shore connections with a current rating more than 125 A, which are suitable for passenger ships with hotel operation, EN 16840 applies.
The requirements for the HD 60364 series and HD 384 series generally apply to low-voltage systems on shore. A detailed list of the relevant parts is given in the Bibliography.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies in connection with EN 15869 1 for the supply of berthed inland navigation vessels with electrical energy from shore.
This document specifies additional requirements for the shore connection cable and the feeding unit of the electrical shore connection.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8385:2018 provides a single classification for all types of dredgers designed for loosening, raising, transporting and disposing of dredged material.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the design, dimensions, technical requirements and testing of connections for the discharge of waste water produced by inland navigation vessels.
This standard specifies:
- a connection of a design common on inland navigation vessels which consists of a threaded pipe and quick-release coupling;
- a connection for vessels with flange ISO 7608 - B1, consisting of an adapter with matching flange and welded threaded pipe and quick-release coupling.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the design, dimensions, technical requirements and testing of connections for the discharge of oily mixture produced by inland navigation vessels.
It is not applicable to the disposal of cargo residues from cargo tanks.
This standard specifies:
- a connection of a design common on inland navigation vessels which consists of a threaded pipe and quick-release coupling;
- a connection for vessels with flange ISO 7608 - A1, consisting of an adapter with matching flange and welded threaded pipe and quick-release coupling.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 8385:2018 provides a single classification for all types of dredgers designed for loosening, raising, transporting and disposing of dredged material.
- Standard4 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
ISO 18422:2014 specifies a plate with instructions for rescue, resuscitation and first aid of drowning persons. This plate is intended for use
- on inland navigation vessels;
- at suitable places on the shore of inland waterways, e.g. harbours, berths, locks, sluices, etc.;
- at other suitable places.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18422:2014 specifies a plate with instructions for rescue, resuscitation and first aid of drowning persons. This plate is intended for use
- on inland navigation vessels;
- at suitable places on the shore of inland waterways, e.g. harbours, berths, locks, sluices, etc.;
- at other suitable places.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies the design, dimensions and technical requirements for connections and pipelines for storing potable water for inland navigation vessels.
These are:
- a fixed connection on the supply side;
- pipeline;
- a fixed connection on the consumer side;
- a connection for retrofitting inland navigation vessels that have a closure device level with the deck (internal pipe thread pursuant to EN ISO 228 1), consisting of a connecting part with a threaded connection and fixed coupling.
Necessary measures to prevent electrostatic charge and overfilling are not governed by the standard.
National regulations apply to drinking water supply plants. The requirements of this European standard supplement these regulations.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port.
Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection.
Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection.
Annex C contains information concerning the dimensioning of shore-based connecting cables.
The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port.
Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection.
Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection.
Annex C contains information concerning the dimensioning of shore-based connecting cables.
The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 7236:2014 applies to mounting attachments for demountable masts with an integral mast lower part for the placing of lights on push barges. It specifies construction, dimensions, manufacture, arrangement, and means of attachment.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to:
- ship's boats that shall be carried on inland navigation vessels according to Annex II of Directive 2006/87/EC;
- lifeboats if no special life-saving equipment (e.g. ADN) is specified for the area of use;
- work boats for the transport of a limited number of persons or smaller working loads in the construction site area and over comparatively short distances.
This standard does not apply to:
- recreational craft according to Directive 2013/53/EU;
- firefighting and water rescue boats.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This European standard specifies the design, dimensions and technical requirements for connections and pipelines for storing potable water for inland navigation vessels.
These are:
- a fixed connection on the supply side;
- pipeline;
- a fixed connection on the consumer side;
- a connection for retrofitting inland navigation vessels that have a closure device level with the deck (internal pipe thread pursuant to EN ISO 228 1), consisting of a connecting part with a threaded connection and fixed coupling.
Necessary measures to prevent electrostatic charge and overfilling are not governed by the standard.
National regulations apply to drinking water supply plants. The requirements of this European standard supplement these regulations.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to:
- ship's boats that shall be carried on inland navigation vessels according to Annex II of Directive 2006/87/EC;
- lifeboats if no special life-saving equipment (e.g. ADN) is specified for the area of use;
- work boats for the transport of a limited number of persons or smaller working loads in the construction site area and over comparatively short distances.
This standard does not apply to:
- recreational craft according to Directive 2013/53/EU;
- firefighting and water rescue boats.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 7236:2014 applies to mounting attachments for demountable masts with an integral mast lower part for the placing of lights on push barges. It specifies construction, dimensions, manufacture, arrangement, and means of attachment.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18421:2016 specifies the construction and dimensions of housing for lifebuoys. The housing serves to encase a lifebuoy to protect it against deterioration from the elements and against vandalism.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesEnglish languagesale 15% off
ISO 7236:2014 applies to mounting attachments for demountable masts with an integral mast lower part for the placing of lights on push barges. It specifies construction, dimensions, manufacture, arrangement, and means of attachment.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off