EN 17360:2020

SLOVENSKI STANDARD
01-maj-2020
Plovila za celinske vode - Oporni drogovi in držala za nagibne in odstranljive
palubne ograje
Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
Fahrzeuge der Binnenschifffahrt - Stützen und Halter für umlegbare und losnehmbare
Geländer
Bateaux de navigation intérieure - Chandeliers et supports pour gardecorps rabattables
et démontables
Ta slovenski standard je istoveten z: EN 17360:2020
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.060 Jezerska in rečna plovila Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17360
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 47.020.10; 47.060
English Version
Inland navigation vessels - Stanchions and holders for
tiltable and detachable railings
Bateaux de navigation intérieure - Chandeliers et Fahrzeuge der Binnenschifffahrt - Stützen und Halter
support pour garde-corps rabattables et démontables für umlegbare und losnehmbare Geländer
This European Standard was approved by CEN on 13 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17360:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Stanchion and holders for tiltable railings (CT) . 6
4.2.1 Assembly . 6
4.2.2 Parts list . 8
4.2.3 Parts . 8
4.3 Stanchion and holders for detachable railings (CD) . 9
4.3.1 Assembly . 9
4.3.2 Parts list . 10
4.3.3 Parts . 11
5 Designation. 12
5.1 Tiltable railing . 12
5.2 Detachable railing . 12
Annex A (informative) Installation instructions for tiltable railings . 13
Bibliography . 14

European foreword
This document (EN 17360:2020) has been prepared by Technical Committee CEN/TC 15 “Inland
navigation vessels”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Scope
This document is applicable to stanchions and holders of tiltable and detachable railings (railing type
CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated
in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging
operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 711, Inland navigation vessels — Railings for decks and side decks — Requirements, designs and types
EN 1123-3, Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and
socket for waste water systems — Part 3: Dimensions and special requirements for vacuum drainage
systems and for drainage systems in ship-building
EN 10025-1, Hot rolled products of structural steels — Part 1: General technical delivery conditions
EN 10058, Hot rolled flat steel bars and steel wide flats for general purposes — Dimensions and tolerances
on shape and dimensions
EN 10217-7, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7: Stainless
steel tubes
EN 10255, Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions
EN 12163, Copper and copper alloys — Rod for general purposes
EN 12164, Copper and copper alloys — Rod for free machining purposes
EN 13601, Copper and copper alloys — Copper rod, bar and
...