47.020 - Shipbuilding and marine structures in general

REN/ERM-TGMAR-535

This document specifies requirements for the design, operation, performance and acceptance tests of marine shark jaws and towing pins having electric, hydraulic, diesel or steam drive. It is applicable to the design, manufacture and acceptance of marine shark jaws and towing pins.

This document specifies a laboratory test method for screening anti-fouling paints in a flow-through system using mussels as the test organism. It is intended to be used in conjunction with ISO 21716-1, which specifies the general requirements. The purpose of the test is to determine if there is a difference in mussel settlement on painted test panels compared with mussel settlement on inert non-toxic control panels under the conditions of the test. Examples of statistical analysis to determine ...view more

This document specifies a laboratory test method for screening anti-fouling paints in a flow-through system using barnacle cyprid larvae as the test organism. It is intended to be used in conjunction with ISO 21716-1, which specifies the general requirements. The purpose of the test is to determine if there is a difference in barnacle settlement on painted test panels compared with barnacle settlement on inert non-toxic control panels under the conditions of the test. Examples of statistical ana...view more

This document specifies general requirements and common specifications for preparing and aging panels coated with anti-fouling paint to perform laboratory bioassay screening tests against specified organisms. Such tests are given in the other parts of the ISO 21716 series, with which this document is intended to be used. This document is applicable to all anti-fouling paints that prevent or deter the attachment and growth of sessile organisms on a surface through chemical or biological means. It...view more

2020-09-02 SG: de-harmonized following TC decisions 2/2020 and 3/2020

This document specifies the classification, requirements, test methods and inspection rules, as well as marking, packaging, shipping and storage requirements for multifunctional manipulators for deck operations (hereinafter referred to as "multifunctional manipulators"). It is applicable to the design, manufacture and acceptance of double folding multifunctional manipulators for clamping and tidying the anchor chain and ropes in deck operations.

This document specifies requirements for the design, operation and acceptance tests of hose reels for crude oil offloading systems. It is applicable to the design, manufacture and acceptance of hose reels for crude oil offloading systems used on marine structures such as floating production storage & offloading (FPSO) and mobile platforms.

This document specifies requirements for the design, operation, performance, and acceptance tests of tandem mooring winches. It is applicable to the design, manufacture and acceptance of tandem mooring winches for crude oil offloading systems of liquid cargo handling equipment.

This document provides a powerful decision-making tool for persons that either have clear professional development goals or have uncertainties related to the progression of their career paths, including minimum education and training requirements for a given occupation so that candidates can take the necessary steps to meet their goals. This document seeks to assist professionals in (or those who would like to enter) the maritime sector, on board or ashore, in determining what they would like to...view more

This document specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity (above 50 000 cP), so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmers provided that the equipment dimensions are within the physical ...view more

This document provides requirements and test methods for tanks, piping and separation systems facilitating the separation of contaminated fluids of oil and water on fixed offshore marine structures and ships, where treatment is performed by separation systems that optimize oil-water separation to a concentration equal to or less than 5 ppm. It is applicable to fixed offshore marine structures and to ships operating in designated sea areas determined by the relevant authorities.

This document specifies operational and performance requirements and methods of testing for night vision equipment fitted to high-speed craft. NOTE In this document, the text identical to IMO Resolution MSC.94 (72) is printed in italics; references to the paragraphs concerned in the IMO Resolution are given in brackets.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for steel rollers installed to lead the mooring rope of a ship.

This document specifies the nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for pedestal fairleads installed to lead the mooring rope of a ship.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for steel plate type recessed bitts to meet normal towing requirements.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for welded steel bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for cruciform bollards suitable for installation on sea-going vessels to meet normal mooring and towing requirements.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for closed chocks installed to lead the mooring and towing rope of a ship.

This document specifies the types, nominal sizes, dimensions and materials, as well as construction, manufacturing and marking requirements, for shipside roller fairleads installed to lead the mooring rope of a ship.