EN 16840:2017
(Main)Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A
This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port.
Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection.
Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection.
Annex C contains information concerning the dimensioning of shore-based connecting cables.
The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.
Fahrzeuge der Binnenschifffahrt - Elektrischer Landanschluss, Drehstrom 400 V, 50 Hz, mindestens 250 A
Diese Europäische Norm legt Anforderungen an elektrische Anlagen zur Versorgung von stillliegenden Fahrzeugen der Binnenschifffahrt mit elektrischer Energie, Drehstrom 400 V, 50 Hz und mit einer Bemessungs-Stromstärke von mindestens 250 A, fest.
Anhang A legt allgemeine und Sicherheitsanforderungen an den landseitigen Teil des elektrischen Landanschlusses fest.
Anhang B legt allgemeine und Sicherheitsanforderungen an die Landanschlussleitungen und an den bordseitigen Teil des elektrischen Landanschlusses fest.
Anhang C enthält Informationen zur Dimensionierung von Landanschlussleitungen.
Für Niederspannungsanlagen an Land gelten allgemein die Anforderungen nach den Reihen HD 60364 und HD 384.
Bateaux de navigation intérieure - Connexion au réseau électrique terrestre, courant triphasé 400 V, 50 Hz, minimum 250 A
La présente Norme européenne définit des exigences relatives aux installations électriques d’alimentation en énergie électrique (courant triphasé de 400 V, fréquence de 50 Hz et intensité assignée de minimum 250 A) de bateaux de navigation intérieure à l’arrêt.
L’Annexe A définit des exigences générales et de sécurité relatives à la partie terrestre de la connexion au réseau électrique terrestre.
L’Annexe B définit des exigences générales et de sécurité relatives aux lignes de raccordement au réseau terrestre et à la partie de la connexion au réseau électrique terrestre se trouvant à bord.
L’Annexe C contient des informations relatives au dimensionnement des lignes de raccordement au réseau terrestre.
Pour les installations terrestres à basse tension, les exigences des séries HD 60364 et HD 384 s’appliquent en général.
Plovila za celinske vode - Električne povezave s kopnim, trifazni tok 400 V, 50 Hz in vsaj 250 A
Ta evropski standard določa zahteve v zvezi z napravami za dobavo električne energije (trifazni izmenični tok – 400 V s frekvenco 50 Hz in s tokom najmanj 250 A) plovilom v pristanišču.
Dodatek A tega evropskega standarda določa splošne in varnostno tehnične zahteve za kopenski del električne povezave s kopnim.
Dodatek B tega evropskega standarda določa splošne in varnostno tehnične zahteve za priključne kable in del električne povezave s kopnim na plovilu.
Za kopensko nizkonapetostno opremo na splošno veljajo zahteve v skladu s skupino standardov HD 60364 in HD 384. Zahteve iz dodatka A tega evropskega standarda dopolnjujejo zahteve iz standarda HD 60364/HD 384, del 1–6.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrzeuge der Binnenschifffahrt - Elektrischer Landanschluss, Drehstrom 400 V, 50 Hz und mindestens 250 ABateaux de navigation intérieure - Connexion au réseau électrique terrestre, courant triphasé 400 V, 50 Hz et minimum 250 AInland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz and at least 250 A47.060Inland navigation vessels47.020.60Electrical equipment of ships and of marine structuresICS:Ta slovenski standard je istoveten z:EN 16840:2017SIST EN 16840:2017en,fr,de01-maj-2017SIST EN 16840:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16840
March
t r s y ICS
t {ä s t rä u râ
v yä r t rä x râ
v yä r x râ
{ uä s v r English Version
Inland navigation vessels æ Electrical shore connectioná threeæphase current
v r r Vá
w r Hzá at least
t w r A Bateaux de navigation intérieure æ Connexion au réseauélectrique terrestreá courant triphasé
v r r Vá
w r Hzá minimum
t w r A
Fahrzeuge der Binnenschifffahrt æ Elektrischer Landanschlussá Drehstrom
v r r Vá
w r Hzá mindestens
t w r A This European Standard was approved by CEN on
{ January
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z v rã t r s y ESIST EN 16840:2017
Contents Page European foreword.4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Requirements .7 4.1 Components .7 4.2 Electrical characteristics .9 4.3 Basic safety requirements .9 4.3.1 General .9 4.3.2 Plug-in connectors .9 4.3.3 On-shore Connection Monitoring .9 4.4 Other requirements .9 Annex A (normative)
Shore-based section . 10 A.1 General . 10 A.1.1 Components . 10 A.1.2 Designs . 11 A.1.3 General requirements . 11 A.1.4 On-shore Connection Monitoring . 11 A.1.5 Lighting . 12 A.1.6 Transfer station . 12 A.2 Mechanical specifications. 12 A.3 Electrical safety . 12 A.4 Further connections . 12 A.5 Other requirements . 12 A.6 Operating instructions . 13 A.7 Designation . 13 A.8 Labelling . 14 Annex B (normative)
On-board section . 15 B.1 On-shore Cable Connection . 15 B.1.1 Components . 15 B.1.2 Selection . 15 B.1.3 Layout . 16 B.2 On-Board Rectifier Unit . 16 B.2.1 Components . 16 B.2.2 On-shore Connection Monitoring . 17 B.2.3 Mechanical specifications. 17 SIST EN 16840:2017
Dimensions for On-shore Connection Cables . 20 Bibliography . 21
Figures Figure 1
Schematic representation of an electrical shore connection . 8 Figure A.1
Circuit diagram
Example of a charging station with two connection units . 11 Figure B.1
Schematic diagram of an on-shore cable connection . 15 Figure B.2
Circuit diagram for an on-board rectifier unit . 17
Tables Table C.1
Current-carrying Capacity and Mass of a single-wire, flexible Hose Cable for Heavy-duty Use . 20
European foreword This document (EN 16840:2017) has been prepared by Technical Committee CEN/TC 15 "Inland navigation vessels", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16840:2017
1 Scope This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port. Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection. Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection. Annex C contains information concerning the dimensioning of shore-based connecting cables. The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15869-2, Inland Navigation Vessels
Electrical Shore Connections, Three-Phase Current 400 V, to 63 A, 50 Hz
Part 2: On-shore Portion, Safety-Related Requirements EN 50525-2-21, Cables and Wiring
High-Voltage Power Lines with Rated Voltage to 450/750 V (Uo/U)
Part 2-21: High-Voltage Power Lines for General Applications
Flexible Cords with cross-linked elastomeric insulation EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60947-2, Low-Voltage Switchgear Part 2: Circuit Breaker (IEC 60947-2) EN 61984, Plug-In Connector
Safety-Related Requirements and Testing (IEC 61984) HD 308 S2, Identification of cores in cables and flexible cords
HD 60364-7-730, Low-voltage electrical installations
Parts 7-730: Requirements for special installations or locations
Onshore units of electrical shore connections for inland navigation vess
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.