EN ISO 6218:2019
(Main)Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2019)
Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2019)
This document specifies dimensions and safety requirements for manually operated and power-operated coupling devices used for assembling inland navigation vessels as push tows or for coupling vessels alongside by means of rope connections. The coupling device secures the stable positioning of the coupled vessels.
Safety requirements to protect operators from accidents during the creation, operation, and separation of the rope connections of push tows and vessels coupled alongside are specified in this document.
It also gives rules for designation and testing.
Fahrzeuge der Binnenschifffahrt - Handbetätigte und kraftbetriebene Spannvorrichtungen für Seilverbindungen von Schub- und Koppelverbänden - Sicherheitsanforderungen und Hauptmaße (ISO 6218:2019)
Dieses Dokument legt Maße und Sicherheitsanforderungen für handbetätigte und kraftbetriebene Spannvorrichtungen fest, die für die Zusammenstellung von Fahrzeugen der Binnenschifffahrt als Schubverband oder als längsseits gekuppelte Fahrzeuge mittels Seilverbindung verwendet werden. Die Spannvorrichtung dient der Sicherstellung der festen Lage der gekuppelten Fahrzeuge zueinander.
Sicherheitsanforderungen zur Vermeidung von Unfällen des Bedienungspersonals beim Zusammenstellen, Betrieb und Trennen der Seilverbindungen von Schub- und Koppelverbänden sind in diesem Dokument enthalten.
Diese Internationale Norm legt zusätzlich Regeln für die Bezeichnung und die Prüfung fest.
Bateaux de navigation intérieure - Treuils d'accouplement manoeuvrés à la main ou motorisés pour les liaisons de câbles des convois poussés et les formations à couple - Exigences de sécurité et dimensions principales (ISO 6218:2019)
Le présent document spécifie les dimensions et les exigences de sécurité pour les treuils d'accouplement manœuvrés à la main ou motorisés utilisés pour assembler des bateaux de navigation intérieure sous forme de convois poussés ou de formations à couple longitudinales au moyen de liaisons de câbles. Le treuil d'accouplement permet de maintenir de façon stable le positionnement des bateaux accouplés.
Des exigences de sécurité ont été incluses dans le présent document afin de protéger les opérateurs des accidents pendant la mise en œuvre, l'utilisation et la séparation des liaisons formées avec des câbles pour les convois poussés et les formations à couple longitudinales.
Le présent document fournit également des règles applicables à la désignation et aux essais.
Plovila za celinske vode - Ročno in električno upravljane vpenjalne naprave za vrvne povezave potisnih enot in pripetih plovil - Varnostne zahteve in glavne mere (ISO 6218:2019)
Ta dokument določa dimenzije in varnostne zahteve za ročno in električno upravljane vpenjalne naprave, ki se uporabljajo za vpenjanje plovil za celinske vode, namenjenih vleki, ali plovil, ki so z njimi povezana, z žično vrvjo. Vpenjalne naprave zagotavljajo stabilno lego vpetih plovil. V tem dokumentu so podane varnostne zahteve za zaščito upravljavcev pred nesrečami med vzpostavljanjem, uporabo ter ločevanjem vrvnih povezav med vlačilci in pripetimi plovili. Standard podaja tudi pravila za označevanje in preskušanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN ISO 6218:2015
Plovila za celinske vode - Ročno in električno upravljane vpenjalne naprave za
vrvne povezave potisnih enot in pripetih plovil - Varnostne zahteve in glavne mere
(ISO 6218:2019)
Inland navigation vessels - Manually- and power-operated coupling devices for rope
connections of pushing units and coupled vessels - Safety requirements and main
dimensions (ISO 6218:2019)
Fahrzeuge der Binnenschifffahrt - Handbetätigte und kraftbetriebene
Spannvorrichtungen für Seilverbindungen von Schub- und Koppelverbänden -
Sicherheitsanforderungen und Hauptmaße (ISO 6218:2019)
Bateaux de navigation intérieure - Treuils d'accouplement manoeuvrés à la main et à
moteur pour les convois poussés et formation à couple - Exigences de sécurité et
dimensions principales (ISO 6218:2019)
Ta slovenski standard je istoveten z: EN ISO 6218:2019
ICS:
47.020.50 Palubna oprema ter naprave Deck equipment and
installations
47.060 Jezerska in rečna plovila Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 6218
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 47.060 Supersedes EN ISO 6218:2015
English Version
Inland navigation vessels - Manually- and power-operated
coupling devices for rope connections of pushing units and
coupled vessels - Safety requirements and main
dimensions (ISO 6218:2019)
Bateaux de navigation intérieure - Treuils Fahrzeuge der Binnenschifffahrt - Handbetätigte und
d'accouplement manoeuvrés à la main ou motorisés kraftbetriebene Spannvorrichtungen für
pour les liaisons de câbles des convois poussés et les Seilverbindungen von Schub- und Koppelverbänden -
formations à couple - Exigences de sécurité et Sicherheitsanforderungen und Hauptmaße (ISO
dimensions principales (ISO 6218:2019) 6218:2019)
This European Standard was approved by CEN on 25 July 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6218:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 6218:2019) has been prepared by Technical Committee ISO/TC 8 "Ships and
marine technology" in collaboration with Technical Committee CEN/TC 15 “Inland navigation vessels”
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6218:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6218:2019 has been approved by CEN as EN ISO 6218:2019 without any modification.
INTERNATIONAL ISO
STANDARD 6218
Fourth edition
2019-08
Inland navigation vessels — Manually-
and power-operated coupling devices
for rope connections of pushing
units and coupled vessels — Safety
requirements and main dimensions
Bateaux de navigation intérieure — Treuils d'accouplement
manoeuvrés à la main ou motorisés pour les liaisons de câbles des
convois poussés et les formations à couple — Exigences de sécurité et
dimensions principales
Reference number
ISO 6218:2019(E)
©
ISO 2019
ISO 6218:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 6218:2019(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety requirements . 2
4.1 General . 2
4.1.1 Components . 2
4.1.2 General requirements . 2
4.2 Limitation of the actuating power for power-operated coupling devices . 2
4.3 Strength requirements . 4
5 Models . 5
5.1 Operation . 5
5.2 Position of handwheel/motor . 5
5.3 With or without tensioning device . 5
6 Design . 6
6.1 Rope drum . 6
6.1.1 Drum capacity . 6
6.1.2 Drum diameter . 6
6.1.3 Rope fastening . . 6
6.2 Handwheel . 6
6.2.1 Clearances . 6
6.2.2 Construction . 6
6.2.3 Handhold . 6
6.3 Power-operated equipment . 6
6.4 Combined operating modes . 6
6.5 Arresting device . 7
6.5.1 General. 7
6.5.2 Arresting devices for manually operated coupling devices . 7
6.5.3 Arresting devices for power-operated coupling devices . 7
6.6 Protective device . 7
6.7 Footbrakes for manually operated coupling devices . 7
6.8 Brakes for power-operated coupling devices . 7
6.9 Gears . 7
6.10 Tensioning device for manually operated coupling systems . 8
6.11 Change gear for manually operated coupling devices . 8
6.12 Foundation . 8
6.13 Guide track. 8
7 Dimensions and characteristic values . 8
7.1 General . 8
7.2 Characteristic values . 8
7.3 Main dimensions of the coupling device . 9
7.3.1 Manually operated coupling device . 9
7.3.2 Power-oper
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.