EN 13573:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plovila za celinske vode - Sistemi za sidranje, sklapljanje, vleko, pritegovanje in privezovanjeFahrzeuge der Binnenschifffahrt - Anker-, Kupplungs-, Schlepp-, Verhol- und FestmacheeinrichtungenBateaux de navigation intérieure - Dispositifs d'ancrage, d'accouplement, de remorquage, de halage et d'amarrageInland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems47.060Inland navigation vessels47.020.50Palubna oprema ter napraveDeck equipment and installationsICS:Ta slovenski standard je istoveten z:EN 13573:2009SIST EN 13573:2009en,fr,de01-marec-2009SIST EN 13573:2009SLOVENSKI
STANDARDSIST EN 13573:20021DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13573January 2009ICS 47.020.50; 47.060Supersedes EN 13573:2001
English VersionInland navigation vessels - Anchoring, coupling, towing, haulingand mooring systemsBateaux de navigation intérieure - Dispositifs d'ancrage,d'accouplement, de remorquage, de halage et d'amarrageFahrzeuge der Binnenschifffahrt - Anker-, Kupplungs-,Schlepp-, Verhol- und FestmacheeinrichtungenThis European Standard was approved by CEN on 5 December 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13573:2009: ESIST EN 13573:2009

1 Scope This European Standard specifies safety requirements for the arrangement, accessibility and marking of anchoring, coupling, towing, hauling and mooring systems on inland navigation vessels.
Depending on the type, the dimensions, the intended use of the vessels as well as the waters on which they are operated, inland navigation vessels are equipped with anchoring, coupling, towing, hauling and mooring systems.
This standard does not apply to recreational craft according to Directive 94/25/EEC. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 790, Inland navigation vessels — Polyamide stairs with inclination angles of 45° to 60° — Requirements, types EN 1261, Fibre ropes for general service — Hemp EN 12339, Inland navigation vessels — Rope tubs EN 13056, Inland navigation vessels — Stairs with inclination angles of 30° to < 45°— Requirements, types EN 13281, Inland navigation vessels — Safety requirements for walkways and working places
EN 13574, Inland navigation vessels — Permanently installed climbing devices with a length not exceeding
5 m EN 13711, Inland navigation vessels — Winches for ship operation — Safety requirements
EN 14330, Inland navigation vessels — Studless anchor chain — Round steel link chain EN 14606, Inland navigation vessels — Studless anchor chain — Accessories EN 14874, Inland navigation vessels — Studless anchor chain — Cable lifter EN 15271, Inland navigation vessels — Studless anchor chain — Anchor equipment EN 15272-1, Inland navigation vessels — Equipment for rope leading — Part 1: General requirements EN 15272-2, Inland navigation vessels — Equipment for rope leading — Part 2: Fairlead EN 15272-3, Inland navigation vessels — Equipment for rope leading — Part 3: Roller fairleads EN 15272-4, Inland navigation vessels — Equipment for rope leading — Part 4: Rope lead EN ISO 1140, Fibre ropes — Polyamide — 3-, 4- and 8-strand ropes (ISO 1140:2004) EN ISO 1141, Fibre ropes — Polyester — 3-, 4- and 8-strand ropes (ISO 1141:2004) EN ISO 1181, Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes (ISO 1181:2004) SIST EN 13573:2009

system used to drop and raise the anchor or to lie at anchor 3.2 coupling system
system used to connect vessels firmly to each other; it allows coupled vessels to be arranged either as push tows or vessels connected at the sides
3.3 towing system system used to pull vessels
3.4 hauling and mooring system system used as a securing or guide point for hauling and mooring ropes
3.5 readily accessible unhampered access to systems arranged adjacent to walkways so that there are neither obstructions nor discontinuities on the walkways
4 Safety requirements, dimensions, strength 4.1 Anchoring system 4.1.1 General Anchoring systems shall consist of anchor and anchor chain or anchor wire rope. If available, they may additionally consist of windlass according to EN 13711 with cable lifter according to EN 14874, equipment according to EN 15271 and anchor hawse or anchor pocket.
4.1.2 Anchor chain or anchor wire rope The anchor chain should be designed as a studless round steel chain or even as a stud link chain.
Dimensions, materials and quality shall conform to the requirements for studless anchor chains according to EN 14330 including accessories according to EN 14606.
Materials and quality of anchor wire ropes shall conform to ISO 2408 or be equivalent.
...