iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

37.060.20 - Motion picture films. Cartridges

ICS 37.060.20 Details

Motion picture films. Cartridges

Kinefilme. Spulen

Films et chargeurs cinématographiques

Filmi. Koluti

General Information

Parent
37.060 - Cinematography
Standardization Organization
Technical Committee
Directive
Mandate
50
ISO
ISO 4241:2019(Main)
Cinematography — Projection film leader (time-based), trailer and cue marks — Specifications

This document specifies the makeup or assembly of time-based leaders and cue marks for 70 mm, 35 mm, and 16 mm motion-picture release prints. NOTE Extraneous materials are dealt with in Annex A.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 17266:2018(Main)
Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions

ISO 17266:2018 specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 12222:2017(Main)
Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions

1.1 ISO 12222:2017 specifies the position and dimensions of machine-readable identification numbers on 16 mm, 35 mm and 65 mm motion-picture film. These numbers are intended to be a machine-readable version of the latent image key number. ISO 12222:2017 also specifies the encoding format to be used for these machine-readable numbers, as well as the area scanned and the spectral characteristics of the scanner. 1.2 ISO 12222:2017 also specifies the position, dimensions and content of human-readable identification (key) numbers for use on 16 mm, 35 mm and 65 mm motion-picture films intended for original photography or intermediate printing which also include the machine-readable key number described in 1.1. NOTE These numbers normally are exposed onto the film at the time of manufacture. 1.3 ISO 12222:2017 further specifies an area that may be used for optional manufacturer-specific film-type identification information. 1.4 ISO 12222:2017 also specifies an area on the film which is not to be exposed by the film manufacturer, thus leaving it available for customer data recording. 1.5 Finally, ISO 12222:2017 specifies an optional frame line index mark for 35 mm and 65 mm film.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 7739:2016(Main)
Cinematography — Two-track photographic analogue sound records on 16 mm motion-picture prints — Positions and width dimensions

ISO 7739:2016 specifies the lateral positions and width dimensions of two-track variable area sound records on 16 mm motion-picture prints. It also specifies the area scanned by the sound reproducer.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 12612:2016(Main)
Cinematography — Interchange of post-production sprocket-based materials

ISO 12612:2016 specifies certain parameters and technical characteristics of post-production motion-picture materials used in the international exchange of 35 mm and 70 mm picture and sound elements. ISO 12612:2016 further specifies a method for the evaluation of picture-image quality based on a standardized test image contained in the post-production picture elements.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 2939:2015(Main)
Cinematography — Picture image area on 35 mm motion-picture release prints — Position and dimensions and analogue and digital photographic sound to picture record displacement

ISO 2939:2015 specifies the positions, dimensions, and location of image and photographic sound records on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223. It also specifies the relative displacement of sound with respect to the corresponding picture image frame and, through normative reference to ISO 17266, the placements of the multichannel analogue and digital photographic sound and control records.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 71:2014(Main)
Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions

ISO 71:2014 specifies the positions and width dimensions of 16 mm negative monophonic photographic sound record on 16 mm, 35/16 mm, and 35/32 mm motion picture film intended for printing of 16 mm release prints.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 7832:2014(Main)
Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration

ISO 7832:2014 specifies a method of measuring and calibrating the photoelectric output factor of single channel analogue photographic-type audio-level test films in all gauges, using a calibrating sound reproducer. It is applicable to both variable area- and variable density-type sound records with a silver audio track. It also specifies the performance of a calibrating audio reproducer.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 20859:2005(Main)
Cinematography - Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film

ISO 20859:2005 specifies the spectral response of the photographic audio reproducer light source and receptor as a unit, including any optical filtering that can be interposed. The analog sound track formats suitable for reproduction using such a reproducer include the cyan dye-only track (without redevelopment of silver) and both conventional and "high magenta" soundtracks (with redevelopment of silver).

  • Standard
    2 pages
    English language
    sale 15% off
ISO
ISO 2467:2004(Main)
Cinematography — Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints — Positions and dimensions

ISO 2467:2004 specifies, for 65 mm/5 perforation motion-picture cameras and projectors, the dimensions of the image area produced by the camera on the film and the maximum projectable image area as well as the image positions relative to the reference edge of the film, and the perforations used to position the film in the camera.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 12611:2004(Main)
Cinematography — Audio head tones for use in international exchange of 35 mm analogue magnetic film masters — Specifications and location

ISO 12611:2004 specifies head-leader tones for use on interchanged motion-picture analogue audio masters, from two track (on three-track format records) through six track.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 1223:2003(Main)
Cinematography — Picture areas for motion-picture films for television — Position and dimensions

ISO 1223:2003 defines the position and dimensions of maximum safe areas of the images on 16 mm and 35 mm motion-picture film, which are transmitted or transferred by television. It applies to all formats which are intended for use with either or both of 4:3 and 16:9 aspect ratios.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 2907:2002(Main)
Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions

ISO 2907:2002 specifies the maximum dimensions of the film image area intended for projection from a 35 mm motion-picture film and the position of this area relative to the perforations and the reference edge of the film. ISO 2907:2002 specifies three types of image areas intended for theatrical projection: Style A: general theatrical release prints commonly referred to as non-anamorphic or wide screen; Style B: theatrical release prints with an anamorphic image; Style C: classic theatrical prints.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 5758:2002(Main)
Cinematography — Labelling of containers for motion-picture film and magnetic material — Minimum information for exchange of materials

ISO 5758:2002 specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies the minimum information necessary for the exchange of materials. NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in ISO 3042.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 491:2002(Main)
Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions

ISO 491 specifies the cutting and perforating dimensions for 35 mm unexposed motion-picture film and 35 mm magnetic film, and the types of perforations used.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 8567:2002(Main)
Cinematography — Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions

ISO 8567:2002 specifies the position and dimensions of the maximum area permitted for subtitles on 35 mm and 16 mm motion-picture release prints for normal projection as specified in ISO 359 and ISO 2907. ISO 8567:2002 does not replace ISO 1223, which specifies the safe areas for prints intended for transmission by television.

  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 2906:2002(Main)
Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions

This International Standard specifies the dimensions of the camera aperture images and the relative positions of the vertical and horizontal centrelines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 35 mm motion-picture cameras. Motion-picture cameras used for different purposes require different aperture sizes. This International Standard specifies the image dimensions resulting from four styles of apertures used for the following purposes. Style A: Four perforations per frame nonanamorphic sound motion pictures. Style B: Four perforations per frame anamorphic sound motion pictures. Style C: Four perforations per frame instrumentation photography and full-frame motion pictures. Style D: Three perforations per frame motion pictures. This International Standard also specifies the position of the photographic emulsion and the frame rate for 35 mm motion-picture cameras.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 17332:2001(Main)
Cinematography — Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film — Specifications

This International Standard specifies the position, dimensions, content and exposure of human-readable, latent image information applied onto 35 mm colour-print film. This information is normally exposed onto the film at the time of manufacture. This International Standard also specifies spectral densities and a film area which is not to be exposed by the film manufacturer, thus leaving it available for subsequent customer data recording such as soundtrack recording, etc.

  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 6025:2000(Main)
Cinematography — Analogue photographic sound test films, 35 mm and 16 mm — Specifications

1.1 This International Standard specifies basic technical characteristics for the international exchange of analogue photographic sound test films intended for checking, adjusting and measuring motion-picture projector sound systems and sound reproducing channels of motion-picture installations for monophonic or stereophonic reproduction. 1.2 This International Standard specifies types and technical characteristics of test films made on 35 mm and 16 mm motion-picture films. 1.3 This International Standard includes test films intended for the checking, adjusting and measuring of a) focusing and azimuth of the scanning beam, b) scanning beam width and its position relative to the reference edge of the film, c) uniformity of the scanning beam illumination, d) level output balance of several motion-picture projectors, e) frequency response of the sound reproduction channel, and f) non-uniformity of film travel.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 5768:1998(Main)
Cinematography — Image produced by camera aperture Type W on 16 mm motion-picture film — Position and dimensions

This International Standard specifies the dimensions and location of the image area produced by the camera aperture Type W on 16 mm motion-picture film intended for enlargement to non-anamorphic 35 mm motion-picture film with an image aspect ratio of 1,66:1 or greater. This International Standard also specifies the dimensions and location of the corresponding image area on a 35 mm internegative or duplicate negative and the enlargement ratio in optical printing from 16 mm Type W originals.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 69:1998(Main)
Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions

This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture and magnetic films with one or two rows of perforations for the following two categories: a) 16 mm motion-picture and magnetic films; b) manufacturer-designated 16 mm professional motion-picture camera films with tighter tolerances. This International Standard applies to safety raw stock film as described in ISO 543.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 8622:1998(Main)
Cinematography — Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes — A-chain reproduction characteristics

This International Standard specifies the A-chain electrical frequency response characteristics for magnetic sound reproduction in motion-picture control rooms and indoor theatres. It is also intended for use, in conjunction with IS0 2969, in the standardization of recording monitor and reproduction characteristics of motion-picture sound in studio dubbing theatres, review rooms and indoor theatres. This International Standard covers that part of the motion picture sound system from the transducer to the input terminals of the main fader, and should be read in conjunction with IS0 8590, which defines the recorded characteristics for 35 mm and 70 mm magnetic striped prints.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 4834:1997(Main)
Cinematography — Magnetic sound test films excluding striped release prints — Basic technical characteristics

This International Standard specifies basic technical characteristics for the magnetic sound test films for checking, adjusting and measuring sound reproducing channels of dubbing motion-picture installations. It also specifies types and technical characteristics of magnetic test films made on 35 mm, 17,5 mm and 16 mm motion-picture films. This International Standard includes test films intended for the checking, adjusting and measuring of a) inclination angle (azimuth) of the magnetic head gaps; b) output level balance of multi-channel systems; c) frequency response of the sound reproduction channel; d) non-uniformity of film velocity (flutter).

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO 12606:1997(Main)
Cinematography — Care and preservation of magnetic audio recordings for motion pictures and television

This International Standard recommends storage conditions for stabilization and preservation of magnetic audio recordings for motion-picture and television production. It recommends the desirable storage conditions for magnetic audio recordings, as they may remain in library or vault storage between periods of intermittent reproduction or duplication. It describes the care and handling of magnetic media intended to be introduced into, or removed from, storage.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 10356:1996(Main)
Cinematography — Storage and handling of nitrate-base motion-picture films

Specifies safety aspects for handling and storage of radiation-sensitive motion-picture films which do not comply with the requirements of ISO 543. Applies to all nitrate-base films which are or have been used in motion-picture photographic systems.

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 6036:1996(Main)
Cinematography — Colour motion-picture prints and slides for television — Density specifications

Specifies principal density values for colour 16 mm and 35 mm motion-picture prints and slides intended for television transmission.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 1039:1995(Main)
Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions

Specifies the sizes and dimensions of cores for motion-picture and magnetic film rolls. Replaces the second edition, which has been technically revised.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 8395:1995(Main)
Cinematography — Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes — Specifications

Specifies basic technical characteristics for magnetic sound test films used for checking, adjusting and measuring 70 mm motion-picture projector sound systems and sound reproduction channels of motion-picture installations. Includes specifications for test films intended for checking, adjusting and measuring of azimuth of the magnetic head gaps; output level balance of several motion-picture projectors or systems and interchannel balance on each projector or system; frequency response of the sound reproduction channels and non-uniformity in velocity of film travel.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 3023:1995(Main)
Cinematography — 65 mm and 70 mm unexposed motion-picture film — Cutting and perforating dimensions

Cancels and replaces the third edition (1988). Specifies the cutting and perforating dimensions for unexposed 65 mm and 70 mm motion-picture film. Applies to safety raw stock film.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 8590:1994(Main)
Cinematography — Audio records on 70 mm motion-picture release prints with magnetic stripes — Recorded characteristic

Specifies the recorded characteristic, i.e. the recorded relative magnetic flux level (in dB) as a function of frequency (in Hz), of audio records on 70 mm motion-picture release prints with magnetic striping when reproduced at the nominal speed of 24 frames per second.

  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 490:1993(Main)
Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions

Specifies location and width of magnetic striping, location and width of gaps of magnetic heads, film projection speed, and longitudinal picture-sound displacement.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ISO
ISO 7343:1993(Main)
Cinematography — Two-track photographic sound records on 35 mm motion-picture prints — Positions and width dimensions

Specifies positions and dimensions, sound records, picture-sound displacement, and track usage.

  • Standard
    2 pages
    English language
    sale 15% off
ISO
ISO 6038:1993(Main)
Cinematography — Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films — Dimensions and locations

Specifies dimensions and locations of transverse cemented or welded overlap splices and butt splices on one laboratory type and 4 projection types of film and print with magnetic or photographic sound records.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 8758:1992(Main)
Cinematography — Photographic control and data records on 16 mm and 35 mm motion-picture film and prints — Dimensions and location

Also specifies the width scanned by the control data reproducer, and the reproducer spectral sensitivity. In the case of release prints, it is restricted to those containing variable area sound records in accordance with ISO 2939 and ISO 7343.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 3042:1992(Main)
Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications

11 items should be indicated: name and type of the film, nominal film width, inside and outside diameters of the core, nominal film width after slitting, perforation pitch, emulsion position and winding orientation, type of the base, manufacturer's batch number, length of film, lighting conditions when opening the container, a mark to indicate that the film is magnetically prestriped. Perforation characteristics and winding designation are described.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 3026:1992(Main)
Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) — Position and dimensions

The dimensions which define the image area are established from the row of perforations discarded after slitting. This row contains a wider perforation and is customarily used for lateral resgistration of the image. Annex A describes the use of a registration device for prints made with a step printer.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 486:1988(Main)
Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions

This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture film which is perforated 8 mm Type R, as well as the width of the motion-picture film after processing and slitting. NOTE - Film perforated in accordance with this International Standard is also referred to as "double 8 mm motion-picture film".

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 3774:1988(Main)
Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 3022:1988(Main)
Cinematography — 35 mm motion-picture film perforated 16 mm (1-3-0) — Cutting and perforating dimensions

This International Standard specifies the cutting and perforating dimensions for 35 mm motion-picture raw stock with three rows of 16 mm perforations in positions l-3-0, as weil as the width of the 16 mm Strip after processing and slitting the print stock.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 1700:1988(Main)
Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions

This International Standard specifies the raw stock cutting and perforating dimensions for 8 mm Type S motion-picture film.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 9525:1988(Main)
Cinematography — Recording head gaps for two sound records on 17,5 mm magnetic film — Positions and width dimensions

This International Standard specifies the lateral positions and width dimensions of the recording heads for two magnetic Sound records and a control track on 17,5 mm Single perforated magnetic recording film. lt also specifies the reproducing velocity of the film travel.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 8687:1987(Main)
Cinematography — Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records — Method of measurement

This International Standard specifies a preferred method and an alternative method for measuring the signal-to-noise ratio of 8 mm type S, 16 mm and 35 mm variable-area photographic Sound records.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 2404:1986(Main)
Cinematography — Six-track magnetic sound records on 70 mm striped release prints — Locations and dimensions

Specified are the locations and widths of magnetic stripes and gaps of magnetic recording and reproducing heads for six-track magnetic sound records on 70 mm release prints on safety film. In special motion-picture films the arrangement of the stripes may deviate from that given here to achieve certain sound effects.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 1189:1986(Main)
Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints — Specifications

This International Standard specifies the recorded characteristic for magnetic Sound records on 35 mm motion-picture film excluding striped release prints when used at the nominal Speed of 24 frames (45,6 cm or 18 in) per second or 25 frames (47,5 cm or 18.7 in) per second. NOTE - This International Standard and relevant portions of Recommendation No. 265-2 of the CCIR have substantially the same technical content.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 7831:1986(Main)
Cinematography — A-chain frequency response for reproduction of 35 mm photographic sound — Reproduction characteristics

This International Standard specifies the A-chain electrical frequency response characteristic for photographic Sound reproduction in motion-picture control rooms and indoor theatres. lt is intended, in conjunction with ISO 2969, to assist in the standardization of recording monitor and reproduction characteristics of motion-picture Sound dubbing theatres, review rooms and indoor theatres. This International Standard covers that part of the motion-picture Sound System from the transducer to the input terminals of the main fader.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 162:1985(Main)
Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions

This International Standard specifies the location and dimen­sions of head gaps for recording three-, four-, or six-track magnetic sound records on 35 mm (perforated in accordance with ISO 491), and one single-track record on 17,5 mm motion­picture film. It also specifies the assignment of records to the various tracks on the magnetic coating on the film in relation to the direction of film travel.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 8400:1985(Main)
Cinematography — Position of emulsion surface of 16 mm motion-picture prints — Identification

This International Standard describes a method for identifying the relationship of the image geometry to the emulsion surface of 16 mm motion-picture prints.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 8001:1984(Main)
Cinematography — Underexposed motion-picture film requiring forced development — Designation method

1 .1 This International Standard specifies a method of designating underexposed motion-picture negative and reversal type film requiring forced or push-processing development. 1.2 This International Standard does not specify the procedure used in achieving a forced development result. NOTE - An International Standard dealing with overexposed motionpicture film is being prepared.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 1780:1984(Main)
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications

This International Standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics necessary for the appropriate flatness of the cartridge and location of film in the camera aperture, for any model of 8 mm Type S Model I motion-picture film camera cartridge [sound or silent, 15 m (50 ft) or 60 m (200 ft)].

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 1188:1984(Main)
Cinematography — Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film — Specifications

This International Standard specifies the recorded characteristic for magnetic sound records on 16 mm full-coat perforated magnetic film when used at the nominal speed of 24 frames [18,3 cm (7.2 in)] per second, or 25 frames [19,05 cm (7.5 in)1 per second.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
50