13.340 - Protective equipment
ICS 13.340 Details
Protective equipment
Schutzkleidung. Schutzausrustung
Equipement de protection individuelle
Varovalna oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 13.340 - Protective equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a test method for determining the resistance of complete protective clothing to inward leakage of liquid chemicals (protective clothing integrity). This method specifies an alternative method for determining the resistance to spray penetration because it uses a static manikin instead of a test subject; it also uses a different spray configuration and duration than the other methods within ISO 17491 series. This test method is aligned with ASTM F1359 since the only laboratories with equipment of this kind are performing testing according to that standard. This test method is not appropriate for evaluating the permeation or penetration of liquid chemicals through the material from which the clothing is made.
- Standard11 pagesEnglish languagesale 15% off
This document specifies performance requirements and test methods for head and face protectors for use by ice hockey goalkeepers only.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies performance requirements and test methods for eye and face protectors for use in ice hockey only. This document is applicable to eye and face protectors worn by ice hockey players other than goalkeepers and by referees.
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
This document specifies general requirements and test methods for head, face, eye, neck, and body protectors (hereafter referred to as protectors) for use in ice hockey. This document is intended only for protectors used for ice hockey.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies performance requirements and test methods for head protectors for use in ice hockey. This document is applicable to head protectors worn by ice hockey players excluding goalkeepers and by referees.
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
This document specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms. NOTE If other protection features are needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is used in addition. Further information on protective gloves standards can be found in the ISO 21420:2020+Amd 1:2022
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Draft6 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
This document specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used. NOTE If other protection features are covered, e.g., mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is used in addition. Further information on protective gloves standards can be found in the ISO 21420.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies a test method for helmets that measures the translational and rotational kinematics in impacts of a helmeted headform against an anvil.
- Draft17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment.
This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance.
The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment.
The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution.
This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method.
The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2).
This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions.
NOTE This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.
- Draft51 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides technical details for calculating predicted burn injury to human skin when its surface is subject to a varying heat flux, such as may occur due to energy transmitted through and by a garment or protective clothing ensemble exposed to flames. A series of test cases are provided against which the burn injury prediction calculation method is verified. It also contains requirements for the in situ calibration of the thermal energy sensor — skin injury prediction system for the range of heat fluxes that occur under garments.
The skin burn injury calculation methods as presented in this test method do not include terms for handling short wavelength radiation that may penetrate the skin. The latter include arc flashes, some types of fire exposures with liquid or solid fuels, and nuclear sources.
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies minimum safety requirements and test methods for protective clothing including hoods, aprons, sleeves, and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this document is only applicable to hoods and gaiters. This document does not cover requirements for feet, hand, face, and/or eye protectors. This type of protective clothing is intended to protect the wearer against the following hazards: — spatter (small splashes of molten metal) in 2 risk levels, short contact time with flame, radiant heat from an electric arc used for welding and allied processes, — harmful artificial optical radiation (UV-A, UV-B and especially UV-C) in 3 risk levels generated during welding and allied processes and — minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling, or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. The main manual welding processes are exemplified and are classified into process groups according to the maximum effectively emitted total irradiance, which has been determined and evaluated by measurement for these types of welding processes. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands, and feet. This document is not applicable for laser welding processes (coherent, monochromatic radiation sources). Guidance for the selection of protective clothing for different welding activities is detailed in Annex B.
- Standard43 pagesEnglish languagesale 15% off
- Standard49 pagesFrench languagesale 15% off
This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the test method for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity:
a) Method A: low-level spray test. This is applicable to clothing that covers the full body surface and is intended to be worn when there is a potential risk of exposure to small quantities of spray or accidental low-volume splashes of a liquid chemical.
b) Method B: high-level spray test. This is applicable to clothing with spray-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment, which covers the full body surface and which is intended to be worn when there is a risk of exposure to sprayed liquid chemical.
This document does not apply to chemical permeation resistance of the materials from which the chemical protective clothing is made.
- Draft25 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides technical details for calculating predicted burn injury to human skin when its surface is subject to a varying heat flux, such as may occur due to energy transmitted through and by a garment or protective clothing ensemble exposed to flames. A series of test cases are provided against which the burn injury prediction calculation method is verified. It also contains requirements for the in situ calibration of the thermal energy sensor — skin injury prediction system for the range of heat fluxes that occur under garments. The skin burn injury calculation methods as presented in this test method do not include terms for handling short wavelength radiation that may penetrate the skin. The latter include arc flashes, some types of fire exposures with liquid or solid fuels, and nuclear sources.
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment. This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance. The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment. The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution. This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method. The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2). This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions. NOTE This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.
- Standard44 pagesEnglish languagesale 15% off
- Standard52 pagesFrench languagesale 15% off
This document specifies the test method for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity: a) Method A: low-level spray test. This is applicable to clothing that covers the full body surface and is intended to be worn when there is a potential risk of exposure to small quantities of spray or accidental low-volume splashes of a liquid chemical. b) Method B: high-level spray test. This is applicable to clothing with spray-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment, which covers the full body surface and which is intended to be worn when there is a risk of exposure to sprayed liquid chemical. This document does not apply to chemical permeation resistance of the materials from which the chemical protective clothing is made.
- Standard18 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
This document specifies requirements for the individual combination (type 2) of knee pads with garments and performance levels for use when working in a kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of knee pads and garments as well as the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
In this part, requirements are given for a specific combination of an individual pad and accordingly designed garment; these forms of knee protection are thus subject to a joint examination.
A combination of a garment with a fixed sized knee pad pocket and fixed sized knee pad (interoperable pad) is described in EN 14404 4 and is excluded from this part.
The position of type 2 knee pads in or on trousers can be fixed or adjustable. The pads consist of foam plastic or other materials that are positioned in knee pockets of the garments or permanently fastened in or on the garments.
- Draft20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for knee protectors (knee mats (type 3)) and performance levels for use when working in a kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of knee mats and the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
- Draft13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for knee protectors (kneeling systems (type 4)) and performance levels for use when working in a kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of kneeling systems and the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors which are not attached to the body in use and that are medical devices or are intended for sports and motorcycles.
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for wearable knee protectors (type 1) and performance levels for use when working in kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of wearable knee protectors and the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
- Draft15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the test methods for knee protectors intended to protect the knee while working in a kneeling position.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
- Draft23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for interoperable knee pads to use in garments and for garments to use with interoperable knee pads and defines performance levels for use when working in a kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of the interoperable knee pad and the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
In this document requirements are given for a combination of a garment with a fixed sized knee pad pocket and fixed sized knee pad (interoperable pad).
A specific combination of an individual pad and accordingly designed garment is described in EN 14404 3 and is excluded from this part.
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.
- Standard33 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
Entertainment audio earplugs use a wired or wireless system through which audio entertainment can be relayed. They may incorporate a radio receiver set or music player for entertainment or allow audio input from external devices.
They also offer the possibility to communicate warning signals or messages. The product standards impose a limitation on the reproduced sound pressure level at the ear.
The entertainment audio signal can be transmitted by radio (broadcast or local plant programmes) or by wire or other communication like Bluetooth.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the nomenclature for typical components of respiratory protective devices. It does not specify which or how many components are used and where they are located in the apparatus.
The illustrations used are given as examples only for the identification of the different parts and the corresponding terms for facilitating the application. The terms and definitions used are given in EN ISO 16972:2020 and EN 135:1998.
The terms are given in the three official CEN languages.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to earplugs supplemented by a safety-related audio input. The audio signal can be transmitted by electrical input or other communication like Bluetooth . It specifies requirements on construction, design, performance, marking and user information related to the inclusion of the safety-related audio input.
Earplugs with safety-related audio input are designed to provide speech information and warning signals, while providing attenuation of external sound. They may be selected for use in a number of different environments, for example in air traffic communication, in the police forces, in the broadcasting and entertainment industries.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to earmuffs supplemented by a safety-related audio input. The audio signal can be transmitted by electrical input or other communication like Bluetooth . It specifies requirements on construction, design, performance, marking and user information related to the inclusion of the safety-related audio input.
Earmuffs with safety-related audio input are designed to provide speech information and warning signals, while providing attenuation of external sound. They may be selected for use in a number of different environments, for example in air traffic communication, in the police forces, in the broadcasting and entertainment industries.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies supplementary acoustic test methods for hearing protectors with additional electronic functions. The purpose of these tests is to enable assessment of the hearing protector performance as specified in the appropriate product standards.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to entertainment audio earmuffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
Entertainment audio earmuffs use a wired or wireless system through which audio entertainment can be relayed. They may incorporate a radio receiver set or music player for entertainment or allow audio input from external devices.
They also offer the possibility to communicate warning signals or messages. The product standards impose a limitation on the reproduced sound pressure level at the ear.
The entertainment audio signal can be transmitted by radio (broadcast or local plant programmes) or by wire or other communication like Bluetooth.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements, testing, marking and manufacturer’s instructions and information for sit harnesses to be used in restraint, work positioning and rope access systems, where a low point of attachment is required. Sit harnesses are not suitable to be used for fall arrest purposes.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits.
This document is not applicable to the testing of garments for resistance to other weather conditions, e.g. snow, hail-, or strong winds.
NOTE For general background of the rain simulation, see Annex A.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits. This document is not applicable to the testing of garments for resistance to other weather conditions, e.g. snow, hail-, or strong winds. NOTE For general background of the rain simulation, see Annex A.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and manufacturer’s instructions and information.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
Entertainment audio earplugs use a wired or wireless system through which audio entertainment can be relayed. They may incorporate a radio receiver set or music player for entertainment or allow audio input from external devices.
They also offer the possibility to communicate warning signals or messages. The product standards impose a limitation on the reproduced sound pressure level at the ear.
The entertainment audio signal can be transmitted by radio (broadcast or local plant programmes) or by wire or other communication like Bluetooth.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to entertainment audio earmuffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.
Entertainment audio earmuffs use a wired or wireless system through which audio entertainment can be relayed. They may incorporate a radio receiver set or music player for entertainment or allow audio input from external devices.
They also offer the possibility to communicate warning signals or messages. The product standards impose a limitation on the reproduced sound pressure level at the ear.
The entertainment audio signal can be transmitted by radio (broadcast or local plant programmes) or by wire or other communication like Bluetooth.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to earplugs supplemented by a safety-related audio input. The audio signal can be transmitted by electrical input or other communication like Bluetooth . It specifies requirements on construction, design, performance, marking and user information related to the inclusion of the safety-related audio input.
Earplugs with safety-related audio input are designed to provide speech information and warning signals, while providing attenuation of external sound. They may be selected for use in a number of different environments, for example in air traffic communication, in the police forces, in the broadcasting and entertainment industries.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies supplementary acoustic test methods for hearing protectors with additional electronic functions. The purpose of these tests is to enable assessment of the hearing protector performance as specified in the appropriate product standards.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to earmuffs supplemented by a safety-related audio input. The audio signal can be transmitted by electrical input or other communication like Bluetooth . It specifies requirements on construction, design, performance, marking and user information related to the inclusion of the safety-related audio input.
Earmuffs with safety-related audio input are designed to provide speech information and warning signals, while providing attenuation of external sound. They may be selected for use in a number of different environments, for example in air traffic communication, in the police forces, in the broadcasting and entertainment industries.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the nomenclature for typical components of respiratory protective devices. It does not specify which or how many components are used and where they are located in the apparatus.
The illustrations used are given as examples only for the identification of the different parts and the corresponding terms for facilitating the application. The terms and definitions used are given in EN ISO 16972:2020 and EN 135:1998.
The terms are given in the three official CEN languages.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements, testing, marking and manufacturer’s instructions and information for sit harnesses to be used in restraint, work positioning and rope access systems, where a low point of attachment is required. Sit harnesses are not suitable to be used for fall arrest purposes.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies minimum requirements for powered filtering Respiratory Protective Devices (RPD) incorporating a loose fitting respiratory interface (RI). It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (concentration in oxygen less than a volume fraction of 17 %).
Escape RPD are not covered by this document.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and manufacturer’s instructions and information.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day