SIST EN ISO 374-6:2025

SLOVENSKI STANDARD
01-december-2025
Varovalne rokavice za zaščito pred nevarnimi kemikalijami in mikroorganizmi - 6.
del: Zaščitne rokavice za frizerje (ISO 374-6:2025)
Protective gloves against dangerous chemicals and micro-organisms - Part 6: Protective
gloves for hairdressers (ISO 374-6:2025)
Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 6:
Schutzhandschuhe für Friseure (ISO 374-6:2025)
Gants de protection contre les produits chimiques dangereux et les micro-organismes -
Partie 6: Gants de protection pour les coiffeurs (ISO 374-6:2025)
Ta slovenski standard je istoveten z: EN ISO 374-6:2025
ICS:
13.340.40 Varovanje dlani in rok Hand and arm protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 374-6
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2025
EUROPÄISCHE NORM
ICS 13.340.40
English Version
Protective gloves against dangerous chemicals and micro-
organisms - Part 6: Protective gloves for hairdressers (ISO
374-6:2025)
Gants de protection contre les produits chimiques Schutzhandschuhe gegen gefährliche Chemikalien und
dangereux et les micro-organismes - Partie 6: Gants de Mikroorganismen - Teil 6: Schutzhandschuhe für
protection pour les coiffeurs (ISO 374-6:2025) Friseure (ISO 374-6:2025)
This European Standard was approved by CEN on 3 August 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 374-6:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and Essential
Requirements of Regulation 2016/425 aimed to be covered . 4
European foreword
This document (EN ISO 374-6:2025) has been prepared by Technical Committee ISO/TC 94 "Personal
safety - Personal protective equipment" in collaboration with Technical Committee CEN/TC 162
“Protective clothing including hand and arm protection and lifejackets” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2026, and conflicting national standards shall
be withdrawn at the latest by March 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 374-6:2025 has been approved by CEN as EN ISO 374-6:2025 without any modification.

Annex ZA
(informative)
Relationship between this European Standard and Essential Requirements
of Regulation 2016/425 aimed to be covered
This European Standard has been prepared under a Commission’s standardization request C(2020)
7924 [M/571] to provide one voluntary means of conforming to essential requirements of (EU)
2016/425, REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 2016 on
personal protective equipment and repealing Council Directive 89/686/EEC].
Once this standard is cited in the Official Journal of the European Union under Regulation, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding essential requirements of that
Regulation and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425
Essential Requirements (ERs) of Clause(s)/subclause(s) of Remarks/Notes
Regulation (EU) 2016/425 this EN
1.1.1 Ergonomics Not covered
1.1.2.1 Optimum level of protection Not covered
1.1.2.2 Classes of protection appropriate to
Not applicable
different levels of risk
1.2.1 Absence of risks and other 'inherent'
4.1, 4.2 and 4.3
nuisance factors
1.2.1.1 Suitable constituent materials 4.1
1.2.1.2 Satisfactory surface condition of all
4.1
PPE parts in contact with the user
1.2.1.3 Maximum permissible user
Not applicable
impediment
1.3.1 Adaptation of PPE to user morphology 4.1
1.3.2 Lightness and strength 4.4
1.3.3 Compatibility of different types of PPE
Not applicable
intended for simultaneous use
1.3.4 Protective clothing containing
Not applicable
removable protectors
1.4 Manufacturer's instructions and
information
2.1 PPE incorporating adjustment systems Not applicable
2.2 PPE enclosing the parts of the body to be
protected
Essential Requirements (ERs) of Clause(s)/subclause(s) of Remarks/Notes
Regulation (EU) 2016/425 this EN
2.3 PPE for the face, eyes and respiratory
Not applicable
system
2.4 PPE subject to ageing 4.1
2.5 PPE which may be caught up during use Not applicable
2.6 PPE for use in potentially explosive
Not applicable
atmospheres
2.7 PPE intended for rapid intervention or to
Not applicable
be put on or removed rapidly
2.8 PPE for intervention in very dangerous
Not applicable
situations
2.9 PPE incorporating components which can
Not applicable
be adjusted or removed by the user
2.10 PPE for connection to complementary
Not applicable
equipment external to the PPE
2.11 PPE incorporating a fluid circulation
Not applicable
system
2.12 PPE bearing one or more identification
markings or indicators directly or indirectly 6
relating to health and safety
2.13 PPE capable of signalling the user's
Not applicable
presence visually
2.14 Multi-risk PPE Not applicable
3.1.1 Impact caused by falling or ejected
objects and collisions of parts of the body Not applicable
with an obstacle
3.1.2.1 Prevention of falls due to slipping Not applicable
3.1.2.2 Prevention of falls from a height Not applicable
3.1.3 Mechanical vibration Not applicable
3.2 Protection against static compression of a
Not applicable
part of the body
3.3 Protection against mechanical injuries Not applicable
3.4.1 Prevention of drowning Not applicable
3.4.2 Buoyancy aids Not applicable
3.5 Protection against the harmful effects of
Not applicable
noise
3.6.1 PPE constituent materials and other
Not applicable
components
3.6.2 Complete PPE ready for use Not applicable
Essential Requirements (ERs) of Clause(s)/subclause(s) of Remarks/Notes
Regulation (EU) 2016/425 this EN
3.7 Protection against cold Not applicable
3.7.1 PPE constituent materials and other
Not applicable
components
3.7.2 Complete PPE ready for use Not applicable
3.8.1 Insulating equipment Not applicable
3.8.2 Conductive equipment Not applicable
3.9.1 Non-ionising radiation Not applicable
3.9.2.1 Protection against external radioactive
Not applicable
contamination
3.9.2.2 Protection against external irradiation Not applicable
3.10.1 Respiratory protection Not applicable
3.10.2 Protection against cutaneous and
4.5 and 4.6
ocular contact
3.11 Diving equipment Not applicable
Table ZA.2 — Normative references from Clause 2 of this document and their corresponding
European publications
Column 1 Column 2 Column 3 Column 4
Reference in International
Title Corresponding European
Clause 2 Standard
Standard Edition
Edition
ISO 374-1:2024 ISO 374-1:2024 Protective gloves against chemicals EN ISO 374-1:2024
and micro-organisms — Part 1
terminology and performance
requirements for chemical risks
ISO 374-2:2019 ISO 374-2:2019 Protective gloves against chemicals EN ISO 374-2: 2019
and micro-organisms — Part 2:
Determination of resistance to
penetration
ISO 374-5:2024 ISO 374-5:2024 Protective gloves against dangerous EN ISO 374-5:2024
chemicals and micro-organisms —
Part 5 terminology and performance
requirements for micro-organisms
risks
ISO 6529:2013 ISO 6529:2013 Protective clothing - Protection
against chemicals — Determination
of resistance of protective clothing
materials to permeation by liquids
and gases
ISO 7000:2019 ISO 7000:2019 Graphical symbols for use on
equipment – Registered symbols
Column 1 Column 2 Column 3 Column 4
Reference in International
Title Corresponding European
Clause 2 Standard
Standard Edition
Edition
ISO 21171:2006 ISO 21171:2006 Medical gloves - Determination of EN ISO 21171:2006
removable surface powder
ISO 21420:2020 ISO 21420:2020 Protective gloves - General FprEN IS 21420:2024
+Amd1:2022 +Amd1:2022 requirements and test methods
The documents listed in the Column 1 of Table ZA.2, in whole or in part, are normatively referenced in
this document, i.e. are indispensable for its application. The achievement of the presumption of
conformity is subject to the application of the edition of Standards as listed in Column 4 or, if no
European Standard Edition exists, the International Standard Edition given in Column 2 of Table ZA.2.
WARNING 1 Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
International
Standard
ISO 374-6
First edition
Protective gloves against dangerous
2025-07
chemicals and micro-organisms —
Part 6:
Protective gloves for hairdressers
Gants de protection contre les produits chimiques dangereux et
les micro-organismes —
Partie 6: Gants de protection pour les coiffeurs
Reference number
ISO 374-6:2025(en) © ISO 2025
ISO 374-6:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 374-6:2025(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
...