13.340.50 - Leg and foot protection

Modification of annex ZA and addition of an European informative annex

This standard specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar. Footwear claiming ‘ slip resistance’ would be deemed an item of personal protective equipment.

This part of ISO 11393 defines the design and specifies the requirements and test methods for leg protectors which offer protection against cutting from a hand-held chainsaw, including requirements for identification, marking and information for the user.

This document specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar.
Footwear claiming ?slip resistance' would be deemed an item of personal protective equipment.
NOTE For product development purposes, sole units, outsoles or other soling components such as top pieces may be tested.

This document specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar. Footwear claiming ?slip resistance' would be deemed an item of personal protective equipment. NOTE For product development purposes, sole units, outsoles or other soling components such as top pieces may be tested.

This document specifies the performance requirements, test methods, design requirements, identification and marking information for leg protectors that offer protection against cutting by hand-held chainsaws.

This part of ISO 11393 specifies requirements and the test methods to be used to assess the resistance of gaiters to cutting by hand-held chain-saws and other properties. A requirement and a test method for assessing the strength of underfoot straps of gaiters is also included.
This part of ISO 11393 is applicable to gaiters which are to be used in conjunction with safety footwear with a steel toecap complying with ISO 20345 design “C” or “D”,. These gaiters shall be designed to be used only in ...view more

This document specifies requirements and test methods for assessing the resistance to cutting of gaiters by hand-held chainsaws and other properties. It includes a requirement and a test method for assessing the strength of underfoot straps of gaiters.
This document is applicable to gaiters used in conjunction with safety footwear with a steel toecap conforming to ISO 20345 design "C" or "D". These gaiters are designed to be used only in association with a defined model of footwear and tested t...view more

This Standard specifies requirements and test methods for the metallic inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).

This document specifies requirements and test methods for non-metallic toecaps, intended to function
as components of PPE footwear (e.g. as described by ISO 20345 and ISO 20346).

This Standard specifies requirements and test methods for metallic toe caps, intended to function as components of PPE footwear (e.g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).

This Standard specifies requirements and test methods for the non-metallic inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).

This document specifies requirements and test methods for the non-metallic inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by ISO 20345, ISO 20346 and ISO 20347).

This document specifies requirements and test methods for the metallic perforation resistant inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by ISO 20345, ISO 20346 and ISO 20347).

This document specifies requirements and test methods for metallic toecaps, intended to function as components of PPE footwear (e.g. as described by ISO 20345 and ISO 20346).

This document specifies requirements and test methods for non-metallic toecaps, intended to function as components of PPE footwear (e.g. as described by ISO 20345 and ISO 20346).

This document specifies requirements and test methods for the non-metallic inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by ISO 20345, ISO 20346 and ISO 20347).