73.060.20 - Manganese ores

ICS 73.060.20 Details

Manganese ores

Manganerze

Minerais de manganese

Manganove rude

General Information

Parent

73.060 - Metalliferous minerals and their concentrates

Frequently Asked Questions

What is ICS 73.060.20?

ICS 73.060.20 is a classification code in the International Classification for Standards (ICS) system. It covers "Manganese ores". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.

How many standards are in ICS 73.060.20 - Manganese ores?

There are 109 standards classified under ICS 73.060.20 (Manganese ores). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.

What is the International Classification for Standards (ICS)?

The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.

e-Library Subscription

Create subscription and get permanent access to documents within 73.060.20 - Manganese ores

Type

Monthly Subscription

for

seat

$ 123.40

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Search Term

Standardization Organization

Technical Committee

Technical Committee Code

Directive

Mandate

Project Code

Project Reference

Project Title

Project Scope

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Publication Date

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Withdrawal Date

	Jan 2026
28	29	30	31	1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31
1	2	3	4	5	6	7

	Feb 2026
25	26	27	28	29	30	31
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
1	2	3	4	5	6	7

Public Enquiry End Date

Page Size:

ASTM

ASTM E465-23(Test Method)

Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

SIGNIFICANCE AND USE
4.1 This test method is intended to be used for compliance with compositional specifications for manganese dioxide content in manganese ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices shall be followed, such as those described in Guide E882.
SCOPE
1.1 These test methods cover the determination of manganese dioxide in amounts commonly found in manganese ore. The determination measures the amount of manganese (IV) present in the sample. The result may be expressed as available oxygen or as manganese dioxide. The following test methods are included and may be used interchangeably:
Sections
Test Method A (Ferrous Ammonium Sulfate)
9 – 13
Test Method B (Periodate (Sodium Oxalate)
14 – 18
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
4 pages
English language
sale 15% off
Standard
4 pages
English language
sale 15% off

31-Mar-2023
73.060.20
E01

ISO

ISO 4298:2022(Main)

Manganese ores and concentrates - Determination of manganese content - Potentiometric method

This document specifies a potentiometric method for the determination of the manganese content of manganese ores and concentrates with manganese content equal to or greater than a mass fraction of 15 %.

Standard
12 pages
English language
sale 15% off

08-Jun-2022
73.060.20
ISO/TC 132

ASTM

ASTM E247-21(Test Method)

Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

SIGNIFICANCE AND USE
5.1 This test method is intended to be used for compliance with compositional specifications for silica content. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E882.
SCOPE
1.1 This test method covers the determination of silica in iron ores, iron ore concentrates and agglomerates, and manganese ore in the range from 0.5 % to 15 %.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
4 pages
English language
sale 15% off
Standard
4 pages
English language
sale 15% off

30-Sep-2021
73.060.10
73.060.20
E01

ASTM

ASTM E248-20(Test Method)

Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

SIGNIFICANCE AND USE
5.1 This test method is intended to be used as a referee method for compliance with compositional specifications for manganese content. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E882.
SCOPE
1.1 This test method covers the determination of manganese in manganese ore in the range from 15 % to 60 %.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
3 pages
English language
sale 15% off
Standard
3 pages
English language
sale 15% off

30-Jun-2020
73.060.20
77.040.30
E01

ASTM

ASTM E316-17(Test Method)

Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

SIGNIFICANCE AND USE
5.1 This test method is intended to be used for compliance with compositional specifications for iron content in manganese ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E882.
SCOPE
1.1 This test method covers the determination of iron in manganese ore in the range from 2 % to 20 %.
Note 1: As used in this test method (except as related to the term relative standard deviation), “percent” or “%” refers to mass fraction (wt/wt) of the form 1g/100g.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard
3 pages
English language
sale 15% off
Standard
3 pages
English language
sale 15% off

14-Dec-2017
73.060.20
E01