73.060 - Metalliferous minerals and their concentrates
Metalliferous minerals and their concentrates
Erze
Minerais metalliferes
Rude in njihovi koncentrati
General Information
This document specifies a flow-table method for the determination of the transportable moisture limit (TML) of copper, lead and zinc sulfide concentrates, which can liquefy during transport. It is applicable to the determination of the TML of concentrates containing 10 % to 80 % (mass fraction) of lead, 10 % to 65 % (mass fraction) of zinc or 10 % to 55 % (mass fraction) of copper and is applicable to TML values in the range 3 % to 28 % (mass fraction).
- Draft21 pagesEnglish language
sale 15% off- Standard21 pagesEnglish language
sale 15% off- Draft18 pagesEnglish language
sale 15% off
This document specifies an analytical method for the determination of total chlorine content using alkaline fusion and potentiometric titration. This method is applicable to copper and nickel sulfide ores and concentrates having chlorine content in the following ranges: a) Method 1: 80 µg/g to 4 300 µg/g b) Method 2: 70 µg/g to 4 300 µg/g
- Standard15 pagesEnglish language
sale 15% off- Draft15 pagesEnglish language
sale 15% off
This document specifies a method for the determination of the moisture content of a lot of iron ore. This method is applicable to all iron ores, whether natural or processed.
- Standard35 pagesEnglish language
sale 15% off- Draft35 pagesEnglish language
sale 15% off
This document specifies a photometric titration method using EDTA for the determination of the total iron content of iron ores. This method is applicable to a concentration range of a mass fraction of 37,00 % to 72,00 % of total iron in natural iron ores, iron ore concentrates and agglomerates, including sinter products.
- Technical specification26 pagesEnglish language
sale 15% off
This document specifies a potentiometric titration method for the determination of total iron content of iron ores, using potassium dichromate as titrant after reduction of the iron(III) by tin(II) chloride and titanium(III) chloride. The excess reductant is then oxidized by potassium dichromate solution. This method is applicable to total iron contents between a mass fraction of 29,04 % and a mass fraction of 72,02 % in natural iron ores and iron ore concentrates and agglomerates including sint...view more
- Technical specification22 pagesEnglish language
sale 15% off
This document specifies experimental methods for checking the precision of sampling, sample preparation and measurement of iron ores being carried out in accordance with the methods specified in ISO 3082 and the relevant ISO standards for measurement. This document can also be applied for the purpose of checking the precision of sampling, sample preparation and measurement separately.
- Standard18 pagesEnglish language
sale 15% off
This document specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows: a) for copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; b) for lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; c) for zinc sulfide concentrates, the method is app...view more
- Standard13 pagesEnglish language
sale 15% off
This document specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows: a) for copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; b) for lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; c)...view more
- Standard12 pagesEnglish language
sale 15% off
This document specifies the methods to be employed for determination of size distributions by sieving of iron ore and direct reduced iron (excluding briquetted iron), utilizing sieves having aperture sizes of 36 µm or larger. The size distribution is expressed in terms of mass and percentage mass, passed or retained on selected sieves. The purpose of this document is to provide a basis for any testing of iron ore and direct reduced iron involving size determination for use by contracting parties...view more
- Standard38 pagesEnglish language
sale 15% off
This document specifies two titrimetric methods, free from mercury pollution, for the determination of total iron content in iron ores, using potassium dichromate as titrant after reduction of the iron(III) by tin(II) chloride and titanium(III) chloride. The excess reductant is then oxidized by either dilute potassium dichromate (Method 1) or perchloric acid (Method 2). Both methods are applicable to a concentration range of 30 % mass fraction to 72 % mass fraction of iron in natural iron ores, ...view more
- Standard15 pagesEnglish language
sale 15% off
This document specifies two titrimetric methods for the determination of the copper content of copper
sulfide concentrates in the range 15 % (m/m) to 50 % (m/m), using sodium thiosulfate after separation
(method 1) or without separation (method 2) of copper from interfering elements.
- Standard20 pagesEnglish language
sale 15% off- Standard24 pagesEnglish language
sale 10% off- e-Library read for1 day
This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the concentrates are susceptible to significant oxidation or decomposition, a common sample that is sufficiently representative, i.e. unbiased and sufficiently precise,...view more
- Standard78 pagesEnglish language
sale 15% off
ISO 21283:2018 specifies a method to determine the fineness of iron ores in terms of specific surface area, using the manual Blaine air-permeability apparatus. ISO 21283:2018 is applicable to pellet feeds in the range of 400 cm2/g to 2 500 cm2/g of specific surface area.
- Standard12 pagesEnglish language
sale 15% off
ISO 10258:2018 specifies two titrimetric methods for the determination of the copper content of copper sulfide concentrates in the range 15 % (m/m) to 50 % (m/m), using sodium thiosulfate after separation (method 1) or without separation (method 2) of copper from interfering elements.
- Standard20 pagesEnglish language
sale 15% off- Standard24 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 15633:2017 specifies a flame atomic absorption spectrometric method for the determination of the nickel mass fraction of iron ores. This method is applicable to mass fractions of nickel between 0,001 % and 0,10 % in natural iron ores, iron ore concentrates and agglomerates including sinter products. This method is not appropriate for referee purposes.
- Standard14 pagesEnglish language
sale 15% off
ISO 22682:2017 specifies a method for the determination of phosphorus, vanadium, titanium, copper, nickel, chromium, barium and cobalt in iron ores, by inductively coupled plasma atomic emission spectrometry (ICP-AES).
- Standard25 pagesEnglish language
sale 15% off
ISO 10204:2017 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of magnesium in iron ores. This method is applicable to mass fractions of magnesium between 0,010 % and 2,00 % in natural iron ores, iron ore concentrates, and agglomerates, including sinter products.
- Standard14 pagesEnglish language
sale 15% off
ISO 3082:2017 provides a) the underlying theory, b) the basic principles for sampling and preparation of samples, and c) the basic requirements for the design, installation and operation of sampling systems for mechanical sampling, manual sampling and preparation of samples taken from a lot under transfer. This is in order to determine the chemical composition, moisture content, size distribution and other physical and metallurgical properties of the lot, except bulk density obtained using ISO 3...view more
- Standard83 pagesEnglish language
sale 15% off
ISO 11794:2017 sets out the basic methods for sampling particulate material that is mixed with a liquid, usually water, to form a slurry. In industry and in the mining and mineral processing literature, slurry is also referred to as pulp, but this term is not used in ISO 11794:2017. At very high ratios of fine particulate solids to liquids where material assumes a soft plastic form, the mixture is correctly termed as a paste. Sampling of pastes is not covered in ISO 11794:2017. The procedures de...view more
- Standard42 pagesEnglish language
sale 15% off
ISO 11790:2017 sets out recommended practices for the inspection of mechanical sampling systems. It serves as a reference for conformance with applicable International Standards for copper, lead, zinc and nickel concentrates. ISO 11790:2017 covers general considerations, including precision, quality variation, bias, establishment of inspection systems and inspection procedures.
- Standard18 pagesEnglish language
sale 15% off