CEN/TC 134/WG 7 - Resilient floor coverings

ISO 16906:2015 specifies a method for determining the strength of the seams of resilient floor coverings when welded in accordance with the manufacturer's instructions.

This document specifies methods for determining side lengths, straightness of edges and squareness of square and/or rectangular resilient or textile floor tiles and planks.

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tiles or planks after exposure to heat.

This document specifies the characteristics of homogeneous quartz vinyl tiles based on polyvinyl chloride binder, quartz sand as a sole or partial filler, with or without a transparent, non-PVC factory finish and supplied in tile form.
To encourage the consumer to make an informed choice, this document includes a classification system (see EN ISO 10874) based on intensity of use, which shows where these floor coverings will give satisfactory service. It also specifies requirements for marking.

This document specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings with foam backing, supplied in roll or in tile form.
This document includes a classification system based on intensity of use, which shows where these resilient floor coverings will give satisfactory service (see EN ISO 10874). It also specifies requirements for marking.

This document specifies the characteristics of homogeneous and heterogeneous smooth (including grained or embossed) rubber floor coverings, supplied in either tile or roll form.
This document includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN ISO 10874). It also specifies requirements for marking.

This document specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form.
This document includes a classification system based on intensity of use, which shows where these resilient floor coverings will give satisfactory service (see EN ISO 10874). It also specifies requirements for marking.

This document specifies the characteristics of homogeneous floor coverings, based on poly(vinyl chloride), supplied in either tile or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document also includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.

This document specifies the characteristics for resilient floor coverings based upon synthetic thermoplastic polymers, supplied either in roll or tile form.
This specification does not apply to floor coverings specified in one of the following standards: EN ISO 10581, EN ISO 10582, EN ISO 10595, EN ISO 26986, EN 650, EN 651 and EN 652.

This document specifies the characteristics of plain and decorated linoleum on a foam backing as a compound floor covering, supplied in roll form.
To encourage the consumer to make an informed choice, this document includes a classification system based on the intensity of use, which shows where resilient floor coverings provide satisfactory service.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included in this document.

ISO 16581:2014 specifies a method for determining the resistance of an installed resilient or laminate floor covering to the mechanical stress resulting from the simulated movement of a furniture leg.

This document specifies the characteristics of plain and decorative linoleum on a corkment backing as a compound floor covering, supplied in roll form.
To encourage the consumer to make an informed choice, this standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN ISO 10874). It also includes requirements for marking.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included in this document.

ISO 10582:2017 specifies the characteristics of non-cushioned, heterogeneous floor coverings, consisting of poly(vinyl chloride) (PVC), supplied in either tile or plank or roll form. Products can contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking.

This European standard specifies the minimum additional characteristics which are necessary for:
-   polyvinyl chloride floor coverings in roll form according to EN ISO 10581 or EN ISO 10582,
-   polyvinyl chloride floor coverings with foam backing in roll form to EN 651,
-   polyvinyl chloride floor coverings with particle based enhanced slip resistance in roll form to EN 13845
to be installed satisfactorily in special wet areas to form a watertight installation with a long life. It specifies two categories (A and B) for use on different substrates.

This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where resilient floor coverings should give satisfactory service.
In addition, this European Standard details the requirements for the information to be included on the packaging labels.
The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.

This standard specifies a method for determining the body voltage generated when a person wearing standardized footwear walks on a resilient or laminate floor covering. The test method can be used under laboratory conditions as well as in situ.

This European Standard specifies the characteristics of heterogeneous resilient floor coverings based on polyurethane with thermosetting properties supplied in either roll, planks or tile form. This specification does apply for floor covering consisting of a wear layer and other compact layers made from polyurethane which differ in composition, chemical crosslinking and/or design and can contain a decor layer, reinforcement and other backing.
This specification does not apply for floor coverings that are specified in EN ISO 10582, EN ISO 24011, EN 1817 or EN 14565.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof, on jute or polyester backing or on polyester felt with polyvinyl chloride backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10595:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

ISO 24345:2006 describes a method for determining the resistance against separation of two layers of a resilient floor covering by peeling.

ISO 23996:2007 describes two methods for determining the density of homogeneous resilient floor coverings and solid layers of other resilient floor coverings.

ISO 26985:2008 specifies methods for identifying linoleum and determining the cement content and ash residue of linoleum floor coverings.

ISO 23997:2007 describes a method for determining the mass per unit area of a resilient floor covering.

ISO 24344:2008 specifies methods for determining the flexibility and deflection of resilient floor coverings.

ISO 24340:2006 describes a method for determining the thickness of different layers of resilient floor coverings.

ISO 26987:2008 specifies a procedure for the determination of the reaction of resilient floor covering to chemical substances.

ISO 24011:2009 specifies the characteristics of plain and decorative linoleum, supplied as either tiles or rolls.
To encourage the consumer to make an informed choice, ISO 24011:2009 includes a classification system based on the intensity of use, which shows where resilient floor coverings provide satisfactory service.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on poly(vinyl chloride) or rubber. Such materials are not included in ISO 24011:2009.

ISO 24346:2006 specifies a method for determining the overall thickness of resilient floor coverings.

ISO 24341:2005 specifies methods for determining the length, width and straightness of resilient or textile floor coverings in sheet form.

ISO 10595:2010 specifies the characteristics of semi-flexible/vinyl composition floor tiles based on poly(vinyl chloride) (PVC) binder and supplied in tile form. Products may contain a transparent, non-PVC factory finish.
To encourage the consumer to make an informed choice, ISO 10595:2010 includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service. It also specifies requirements for marking

ISO 24343-1:2007 describes a method for determining the residual indentation produced in a resilient or laminate floor covering after the application and removal of a constant load.

This European Standard specifies the characteristics of agglomerated cork with a wear layer based on polyvinyl chloride and modifications thereof.
To encourage the consumer to make an informed choice, the European Standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.

This European Standard specifies the characteristics of corklinoleum, supplied in roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded from this standard.

This European Standard specifies the characteristics of floor coverings based on polyvinyl chloride and modifications thereof with a cork-based backing, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking

This European Standard specifies the characteristics of smooth, grained or embossed rubber coverings with a decorative surface layer, with or without a foam backing supplied in either tile or roll form.
This European Standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking, labelling and packaging.

To provide an informative annex that defines the precision of the test method according to interlaboratory trial results.

This European Standard specifies the characteristics of floor coverings with compact surface layers, made of polyvinyl chloride and modifications thereof, on a filled fibrous backing and supplied in roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system (see EN 685) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirement for marking.

This European Standard specifies the requirements of corkment underlay with linoleum cement as binder, supplied in sheet form. Corkment underlay is used in combination with floor coverings to improve impact sound reduction. The performance therefore depends on the combination of corkment and the type of floor covering used and also the installation of both. To ensure correct use of corkment underlay the instructions of the manufacturer should be followed.

This European Standard describes the Frick-Taber method for determining the wear resistance of the wear layer of polyvinyl chloride floor coverings under laboratory conditions. The test method is applicable to floor coverings with smooth surfaces. It can be used to determine the wear resistance of surfaces against abrasion and particularly for ranking different wear layer types within one type of product. It is not appropriate for comparing the wear resistance of different materials, e.g. rubber and polyvinyl chloride.

This European Standard specifies the requirements for cork underlays made from agglomerated cork designed to be used in conjunction with any type of resilient floor covering to improve its acoustical performance and/or to provide a base for any rigid floor coverings. Optionally, they may be used to improve thermal performance. This standard also specifies requirements for marking and labelling.

This European Standard specifies a method for determining the moisture content of agglomerated cork.

This European Standard gives definitions for terms relating to resilient floor coverings, in roll or tile form.

TC - Corrections to references

This European Standard specifies two methods, for determining the resistance of resilient floor coverings to stubbed and burning cigarettes.

This European Standard specifies a method for determining the dimensional stability of linoleum tiles caused by changes in atmospheric humidity.