EN ISO 24011:2012

SLOVENSKI STANDARD
01-maj-2012
1DGRPHãþD
SIST EN 548:2011
Netekstilne talne obloge - Specifikacija za linolej brez vzorca in z vzorcem (ISO
24011:2009)
Resilient floor coverings - Specification for plain and decorative linoleum (ISO
24011:2009)
Elastische Bodenbeläge - Spezifikation für Linoleum mit und ohne Muster (ISO
24011:2009)
Revêtements de sol résilients - Spécifications pour le linoléum uni et décoratif (ISO
24011:2009)
Ta slovenski standard je istoveten z: EN ISO 24011:2012
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 24011
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 97.150 Supersedes EN 548:2011
English Version
Resilient floor coverings - Specification for plain and decorative
linoleum (ISO 24011:2009)
Revêtements de sol résilients - Spécifications pour le Elastische Bodenbeläge - Spezifikation für Linoleum mit
linoléum uni et décoratif (ISO 24011:2009) und ohne Muster (ISO 24011:2009)
This European Standard was approved by CEN on 31 December 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24011:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 24011:2009 has been prepared by Technical Committee ISO/TC 219 “Floor coverings” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 24011:2012 by
Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 548:2011.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 24011:2009 has been approved by CEN as a EN ISO 24011:2012 without any modification.
INTERNATIONAL ISO
STANDARD 24011
First edition
2009-11-01
Resilient floor coverings — Specification
for plain and decorative linoleum
Revêtements de sol résilients — Spécifications pour le linoléum uni et
décoratif
Reference number
ISO 24011:2009(E)
©
ISO 2009
ISO 24011:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved

ISO 24011:2009(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Identification requirements .2
5 Requirements.2
6 Classification.3
7 Marking, labelling and packaging.5
Annex A (informative) Optional properties.6
Bibliography.7

ISO 24011:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 24011 was prepared by Technical Committee ISO/TC 219, Floor coverings.

iv © ISO 2009 – All rights reserved

INTERNATIONAL STANDARD ISO 24011:2009(E)

Resilient floor coverings — Specification for plain and
decorative linoleum
1 Scope
This Interna
...