33.120.10 - Coaxial cables. Waveguides
ICS 33.120.10 Details
Coaxial cables. Waveguides
Koaxialkabel. Wellenleiter
Cables coaxiaux. Guides d'onde
Koaksialni kabli. Valovodi
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 33.120.10 - Coaxial cables. Waveguides
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- Draft14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60153-2:2025 specifies straight hollow metallic tubing of ordinary rectangular cross-section for use as waveguides in radio frequency electrical applications. The term "ordinary rectangular waveguide" in the title of this document refers to rectangular waveguides with a b-to-a ratio of 0,5 (or slightly less). The objective of this document is to specify for hollow metallic waveguides: a) the details necessary to ensure compatibility and, as far as is essential, interchangeability; b) test methods; c) uniform requirements for the electrical and mechanical properties. This document does not contain any binding specifications for the materials to be used, but merely examples. The exact selection of materials is subject to agreement between the customer and the supplier. This fourth edition cancels and replaces the third edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of a cross-sectional view of the waveguide; b) addition of informative content on the theoretical background of the standard; c) use of a lower case "k" in the waveguide designation, where appropriate; d) revision of main specification table (now Table 1): 1) two waveguides moved to the end of the table (R 35, R 41); 2) correction of one waveguide designation (now R 26k); 3) correction of one waveguide outside width (R 18); 4) relaxation of tolerances of waveguide outside dimensions (R 14 to R 70); 5) removed attenuation values of waveguides made of gold, aluminium, and stainless steel; 6) implementation of attenuation values for an idealised copper waveguide; e) relaxation of tolerances of waveguide outside dimensions for R 14 to R 70 in the table now referred to as Table 4; f) clarification of the electrical tests: 1) use of standard annealed copper as the reference material for waveguide tubes; 2) correction of the formula for calculating the theoretical attenuation of an idealised copper waveguide; 3) addition of a formula for calculating the theoretical attenuation of waveguides made of any material; 4) addition of an informative table with typical waveguide materials (Table 5); g) addition of an informative cross-reference for waveguide type designations (Annex A).
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard6 pagesEnglish and French languagesale 15% off
IEC 62037-2:2021 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices. It is also used to evaluate cable assemblies that are subjected to motion in operation.
This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition:
a. criteria for application of mechanical stress revised to be a function of advertised cable bend radius.
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 63466-1:2025 specifies the general requirements and test methods for leaky waveguides, including terms and definitions, design and structure, type designation, ratings and characteristics, identification, marking and labelling, requirements and test methods, etc.
This document is applicable to leaky waveguides, including rigid rectangular leaky waveguides and elliptic leaky waveguides. These leaky waveguides are intended for use in tunnels, railways, highways, subways, elevators and other installations in which conventional antenna transmission is not satisfactory or even impossible.
- Standard38 pagesEnglish languagesale 15% off
IEC 60153-2:2025 specifies straight hollow metallic tubing of ordinary rectangular cross-section for use as waveguides in radio frequency electrical applications.
The term "ordinary rectangular waveguide" in the title of this document refers to rectangular waveguides with a b-to-a ratio of 0,5 (or slightly less).
The objective of this document is to specify for hollow metallic waveguides:
a) the details necessary to ensure compatibility and, as far as is essential, interchangeability;
b) test methods;
c) uniform requirements for the electrical and mechanical properties.
This document does not contain any binding specifications for the materials to be used, but merely examples. The exact selection of materials is subject to agreement between the customer and the supplier.
This fourth edition cancels and replaces the third edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of a cross-sectional view of the waveguide;
b) addition of informative content on the theoretical background of the standard;
c) use of a lower case "k" in the waveguide designation, where appropriate;
d) revision of main specification table (now Table 1):
1) two waveguides moved to the end of the table (R 35, R 41);
2) correction of one waveguide designation (now R 26k);
3) correction of one waveguide outside width (R 18);
4) relaxation of tolerances of waveguide outside dimensions (R 14 to R 70);
5) removed attenuation values of waveguides made of gold, aluminium, and stainless steel;
6) implementation of attenuation values for an idealised copper waveguide;
e) relaxation of tolerances of waveguide outside dimensions for R 14 to R 70 in the table now referred to as Table 4;
f) clarification of the electrical tests:
1) use of standard annealed copper as the reference material for waveguide tubes;
2) correction of the formula for calculating the theoretical attenuation of an idealised copper waveguide;
3) addition of a formula for calculating the theoretical attenuation of waveguides made of any material;
4) addition of an informative table with typical waveguide materials (Table 5);
g) addition of an informative cross-reference for waveguide type designations (Annex A).
- Standard17 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
- Standard35 pagesEnglish and French languagesale 15% off
IEC 61196-1-114:2025 specifies a test method to determine the inductance characteristics of coaxial communication cables. This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the term "inductance" has been revised;
b) the necessary abbreviated term is added;
c) the length and layout of the test sample have been revised;
d) the measuring procedure has been revised;
e) the additional information for the bending effect on coaxial cable inductance test is provided in Annex A.
- Standard15 pagesEnglish languagesale 15% off
IEC 62153-4-7:2021 deals with the triaxial tube in tube method. This triaxial method is suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin connectors and multicore cable assemblies. This third edition cancels and replaces the second edition published in 2015 and its Amendment 1:2018.This edition includes the following significant technical changes with respect to the previous edition:
- Annex E contains informative information about the direct measurement of screening effectiveness of connectors;
- Annex F gives normative information about mixed mode parameters;
- Annex G contains normative information about accessories for measuring coupling attenuation;
- Annex H discusses the low frequency screening attenuation.
- Standard174 pagesEnglish languagesale 15% off
- Standard136 pagesEnglish languagesale 15% off
- Standard114 pagesEnglish and French languagesale 15% off
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard30 pagesEnglish and French languagesale 15% off
This document specifies the required characteristics of coaxial cables, 50 Ω, type WN, for use in aircraft electrical systems at operating temperatures between −55 °C and 200 °C and specially for high frequency up to 6 GHz.
The document encloses also a reinforced cable version (code R) which is used for sensitive systems with controlled VSWR.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the required characteristics of coaxial cables, 50 Ω, type WM, for use in aircraft electrical systems at operating temperatures between −55 °C and 200 °C and specially for high frequency up to 6 GHz.
The document encloses also a reinforced cable version (code R) which is used for sensitive systems with controlled VSWR.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the required characteristics of a coaxial cable, 50 Ω, type WD, for use in aircraft electrical systems at operating temperature between -55 °C and 200 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by thermal stability test.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61196-1-128:2025 applies to radiating cables. It specifies a test method for determining the polarization directivity of radiating cables for use in MIMO communication systems.
- Standard19 pagesEnglish languagesale 15% off
IEC TR 62839-1:2025 describes the product specific rules (PSR) for wires and cables used for communication, data, control and command.
These PSR are applicable in case the life cycle assessment (LCA) results are intended to be used in external communication in the form of an environmental product declaration (EPD), as laid out in ISO 14021, ISO 14025, ISO 14026 and ISO 14067. These PSR are complementary to the product category rules (PCR) for (LCA) of electrical and electronic products and systems (EEPS) provided in IEC 63366.
The following categories of wires and cables are covered in this document:
– communication and data wires and cables which can comprise metallic conductors or optical fibre;
– control and command wires and cables which can comprise metallic conductors or optical fibre.
This document is applicable to communication cables in general, it is related in particular to the wire and cable products covered by generic cabling described in the ISO/IEC 11801 series which is based on component standards described in the IEC 60794 series (fibre optic cables), IEC 61156 series (metallic balanced communication cables) and the IEC 61196 series (coaxial metallic communication cables). According to this relationship, this document is related to ISO/IEC 14763-5 which describes sustainability aspect of generic cabling.
This document is primarily intended for:
– environment and/or product managers;
– LCA experts in companies or contractors and other 3rd party operators, in charge of EPD;
– verifiers in charge of conformity assessment in accordance with the defined rules.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The term "accessory products" has been removed from the title and the text as accessories are covered by IEC TR 62839-2.
b) The consideration of remote powering was added for the evaluation of the use stage.
c) Guidance was added with respect to evaluate the use stage of certain coaxial cables.
d) Update of the entire document to reflect a complete life cycle assessment.
- Technical report24 pagesEnglish languagesale 15% off
IEC 61196-1-102:2025 applies to coaxial communication cables. It specifies test methods for determining the insulation resistance of coaxial cables. It is intended to detect the flaws in the dielectric of finished coaxial cables. This second edition cancels and replaces the first edition, published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the scope was extended;
b) the procedure is updated for the period of discharge and the test sample with high insulation resistance;
c) the unit of cable length has been amended;
d) the test procedures for the cables with special structure are specified in Annex A.
- Standard14 pagesEnglish languagesale 15% off
IEC 61196-1-101:2025 applies to coaxial communications cables. It specifies test methods for determining the conductor DC resistance of coaxial cables.
This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 4, Test equipment, is extended;
b) in Clause 5, the cable length is specified;
c) Clause 6, Test procedure, is revised;
d) Clause 7, Expression of test results, is revised;
e) Clause 8, Failure criterion, is introduced;
f) Clause 9, Information to be given in the relevant specification, is revised;
g) Clause 10, Test report, is revised.
- Standard6 pagesEnglish languagesale 15% off
IEC 62037-8:2025 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be conducted on any material or object and is not limited to devices designed to propagate RF signals. This test can be conducted as either a near field or far field test as defined by the test specification in an outdoor test site or in an anechoic test chamber.
This second edition cancels and replaces the first edition published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) added safety warning to verify that transmitters are switched off before connecting or disconnecting any component;
b) corrected formula for calculating directivity;
c) corrected antenna orientation labels in Figure 6;
d) added clarification that PIM tests reports shall include maximum PIM and VSWR values.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60050-726:2025 gives the terms and definitions for the wide area of transmission lines and waveguides and the related technologies, from the physics to their applications representing the present state-of-the–art. This new edition reviews and complements the previous one. It has the status of a horizontal standard in accordance with IEC Guide 108.
This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
This horizontal publication is primarily intended for use by technical committees in the preparation of IEC publications in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal publications in the preparation of its publications.
- Standard320 pagesEnglish and French languagesale 15% off
IEC 61196-1-108:2025 applies to coaxial communications cables. It specifies test methods for determining the phase, phase constant, phase and group delay, propagation velocity, electrical length, and mean characteristic impedance of coaxial cables for use in communications systems.
A procedure to measure phase dispersion of coaxial cable is included as Annex A.
This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Change of title, "phase and phase constant" was added.
b) Clause 6, "Preparation of test sample (TS)" was added.
c) Clause 7, "Test procedure" was added.
d) Clause 8, "Failure criterion" was added.
e) Clause 9, "Information to be given in the relevant specification" was added.
- Standard18 pagesEnglish languagesale 15% off
IEC 61196-1-113:2024 applies to coaxial communications cables. It specifies a test method for determining the attenuation constant of coaxial cables for use in communications systems. The test is applicable preferably at frequencies ≥5 MHz but also for lower frequencies if the magnitude of the complex characteristic impedance is approximately equal to the nominal characteristic impedance of the test sample (TS) or if a form fitting function is applied.
This third edition cancels and replaces the second edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) add Clause 3 "Terms and definitions";
b) add Clause 4 "Test environment";
c) add Clause 5 "Preconditioning";
d) add Subclause 7.1 "General";
e) add detail test methods including 7.2 "long cable methods" and 7.3 "double-cable method";
f) add "Annex A Stability of attenuation constant at different temperatures";
g) add "Annex B Test examples of stability of attenuation constants at different temperature".
- Standard16 pagesEnglish languagesale 15% off
IEC 61196-1-111:2024 provides test methods to determine the stability of phase of coaxial communication cables. This document is applicable to RF coaxial cables. RF coaxial cable assemblies can also use this document for reference. This part of IEC 61196 comprises following test methods:
a) phase variation with temperature (Clause 4);
b) phase constant variation with temperature (Clause 5);
c) phase stability with bending (Clause 6);
d) phase stability with twisting (Clause 7);
e) phase consistency test for two or more cables (Annex A);
f) phase variation with temperature test between two cables (Annex B).
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of the list of test methods in the Scope;
b) addition of "the number of scanning points" in every test method;
c) addition of Annex A, Phase consistency test for two or more cables;
d) addition of Annex B, Phase variation with temperature test between two cables.
- Standard27 pagesEnglish languagesale 15% off
- Standard54 pagesEnglish languagesale 15% off
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61196-1-105:2024 applies to coaxial communication cables. It specifies test methods for determining the withstand voltage of the dielectric of coaxial cables. It is intended to detect the flaws in the dielectric of finished coaxial cables. The test procedures for the cables with special structure are specified in Annex A.
- Standard8 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 15% off
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61196-12:2024 defines general requirements for spacer clamps for radiating cables, including terms and definitions, design and construction, IEC type designation, requirements and test procedures and type tests.
The contents of this document are suitable for spacer clamps for installation of radiating cables. These cables and their spacer clamps are widely used in tunnels, subways, underpasses, and shafts. Their intended application is in weather-protected environments and, optionally, outdoors.
- Standard28 pagesEnglish languagesale 15% off
IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc.
This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62153-4-3:2013(E) determines the screening effectiveness of a cable shield by applying a well-defined current and voltage to the screen of the cable and measuring the induced voltage in order to determine the surface transfer impedance. This test measures only the magnetic component of the transfer impedance. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- now three different test configurations are described;
- formulas to calculate the maximum frequency up to which the different test configurations can be used are included;
- the effect of ground loops is described.
- Standard45 pagesEnglish languagesale 15% off
- Standard94 pagesEnglish languagesale 15% off
IEC 60966-2-1:2024 is a sectional specification that relates to flexible RF coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform requirements for testing the electrical, mechanical and climatic properties of flexible cable assemblies composed of flexible RF coaxial cables and RF coaxial connectors.
This part of IEC 60966 applies to flexible cable assemblies composed of flexible RF coaxial cables and coaxial connectors. Flexible RF cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-2-2:2024 is a blank detail specification that relates to flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM).
The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer or a user.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM).
The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-2-1:2024 is a sectional specification that relates to flexible RF coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform requirements for testing the electrical, mechanical and climatic properties of flexible cable assemblies composed of flexible RF coaxial cables and RF coaxial connectors. This part of IEC 60966 applies to flexible cable assemblies composed of flexible RF coaxial cables and coaxial connectors. Flexible RF cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard9 pagesEnglish and French languagesale 15% off
IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-2-2:2024 is a blank detail specification that relates to flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer or a user.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-2-1:2024 is a sectional specification that relates to flexible RF coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform requirements for testing the electrical, mechanical and climatic properties of flexible cable assemblies composed of flexible RF coaxial cables and RF coaxial connectors.
This part of IEC 60966 applies to flexible cable assemblies composed of flexible RF coaxial cables and coaxial connectors. Flexible RF cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard53 pagesEnglish and French languagesale 15% off
IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM).
The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.
- Standard24 pagesEnglish and French languagesale 15% off
IEC 60966-2-2:2024 is a blank detail specification that relates to flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM).
The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer or a user.
- Standard22 pagesEnglish and French languagesale 15% off
IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc.
This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard45 pagesEnglish and French languagesale 15% off
IEC 61196-1-127:2024 applies to radiating cables. It specifies a test method for determining the link loss of radiating cables for use in communication systems.
- Standard19 pagesEnglish languagesale 15% off
- Corrigendum1 pageFrench languagesale 10% offe-Library read for1 day
IEC 60966-3-1:2023 is a blank detail specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM).
The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification can be prepared by the insertion of data into the pro forma by a national organization, a manufacturer, or a user.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-3:2023 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-flexible cable assemblies, quality assessment, delivery and storage, etc.
This part of IEC 60966 applies to semi-flexible cable assemblies composed of semi-flexible coaxial cables and coaxial connectors. Semi-flexible cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-3:2023 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-flexible cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-flexible cable assemblies composed of semi-flexible coaxial cables and coaxial connectors. Semi-flexible cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60966-3-1:2023 is a blank detail specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification can be prepared by the insertion of data into the pro forma by a national organization, a manufacturer, or a user.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62153-4-16:2021 specifies a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up in accordance with IEC 62153-4-3, IEC 62153‑4‑4 and IEC 62153-4-15. This method is applicable for homogenous screens, i.e. screens having a transfer impedance directly proportional to length.
This second edition cancels and replaces the first edition published in 2016. This edition includes the following significant technical changes with respect to the previous edition:
- replacement of the conversion formula which was limited to a matched DUT by a new conversion formula suitable for any load conditions.
- Standard2 pagesEnglish and French languagesale 15% off