EN IEC 62153-4-15:2021/A1:2024
(Amendment)Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
Prüfverfahren für metallische Kommunikationskabel und andere passive Bauteile - Teil 4-15: Elektromagnetische Verträglichkeit (EMV) - Prüfverfahren zur Messung des Kopplungswiderstandes und der Schirmdämpfung oder der Kopplungsdämpfung mit der Triaxialen Zelle
Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-15 : Compatibilité électromagnétique (CEM) - Méthode d'essai pour le mesurage de l'impédance de transfert et de l'affaiblissement d'écran ou de l'affaiblissement de couplage avec cellule triaxiale
Preskusne metode za kovinske kable in druge pasivne komponente - 4-15. del: Z elektromagnetno združljivostjo (EMC) povezana preskusna metoda za meritve prenosne impedance in zaslonskega slabljenja ali sklopnega slabljenja s triosno celico - Dopolnilo A1 (IEC 62153-4-15:2021/AMD1:2024)
General Information
Relations
Overview
EN IEC 62153-4-15:2021/A1:2024 is a European amendment to the international standard focusing on test methods for metallic cables and other passive components. This amendment addresses electromagnetic compatibility (EMC) by defining test procedures for measuring transfer impedance, screening attenuation, and coupling attenuation using a triaxial cell. Developed by the International Electrotechnical Commission (IEC) and adopted by CENELEC, this standard ensures consistency in assessing the EMC performance of metallic communication cables, coaxial cables, waveguides, and related passive components under standardized conditions.
Key updates include refined methods for expressing coupling attenuation through mixed mode scattering parameters and envelope line analysis, enhancing the accuracy and comparability of EMC-related cable tests.
Key Topics
- Electromagnetic Compatibility (EMC) Testing: Standardizes procedures related to measuring factors impacting a cable's ability to shield and resist electromagnetic interference.
- Transfer Impedance Measurement: Defines how to quantify the transfer impedance of metallic cables, indicating their susceptibility to electromagnetic coupling and interference.
- Screening and Coupling Attenuation: Outlines test methods to measure the effectiveness of cable shielding and the attenuation of coupled signals.
- Triaxial Cell Method: Utilizes a precise test setup involving a triaxial cell for reproducible measurement of transfer impedance and attenuation values.
- Mixed Mode Scattering Parameters: Incorporates advanced measurement techniques enabling assessment of coupling attenuation through mixed mode network analysis.
- Envelope Line Description: Introduces a standardized method for depicting coupling attenuation results via an envelope curve, facilitating trace comparison and interpretation.
- Normative Annex (Annex H): Provides mathematical formulations and guidance for calculating coupling attenuation using mixed mode parameters and for constructing the envelope line graphic representation.
Applications
EN IEC 62153-4-15:2021/A1:2024 applies to professionals and organizations involved in the design, testing, manufacture, and certification of:
- Metallic communication cables, including coaxial cables and waveguides.
- Passive components used in electromagnetic shielding and signal integrity applications.
- EMC laboratories performing compliance and conformity testing.
- Manufacturers seeking to validate shielding effectiveness and to reduce electromagnetic noise in cable assemblies.
- Telecommunications, broadcasting, automotive, aerospace, and industrial sectors requiring reliable EMC performance in their cabling infrastructure.
By applying this standard, stakeholders ensure that cables and passive components meet international requirements for transfer impedance and screening performance, which is critical for minimizing electromagnetic interference in complex systems.
Related Standards
- IEC 62153 Series: Broader suite of test methods for metallic communication cables covering various performance and environmental tests.
- IEC 61000 Series: Guidelines for electromagnetic compatibility applicable to electrical and electronic equipment.
- ISO/IEC Directives: Framework followed for developing and maintaining standardized testing procedures.
- CENELEC Norms: Harmonized European standards complementing IEC publications to ensure regional compliance.
- National Standards Correspondents: Adaptations of EN IEC 62153-4-15 for specific markets ensuring consistent national application.
Keywords
Electromagnetic compatibility, EMC testing, transfer impedance, screening attenuation, coupling attenuation, triaxial cell, metallic communication cables, coaxial cables, passive components, mixed mode scattering parameters, envelope line, IEC 62153-4-15, CENELEC standards, cable shielding performance, EMC measurement methods.
Frequently Asked Questions
EN IEC 62153-4-15:2021/A1:2024 is a amendment published by CLC. Its full title is "Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell". This standard covers: Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
EN IEC 62153-4-15:2021/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 33.100.10 - Emission; 33.120.10 - Coaxial cables. Waveguides. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 62153-4-15:2021/A1:2024 has the following relationships with other standards: It is inter standard links to EN IEC 62153-4-15:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN IEC 62153-4-15:2021/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Preskusne metode za kovinske kable in druge pasivne komponente - 4-15. del: Z
elektromagnetno združljivostjo (EMC) povezana preskusna metoda za meritve
prenosne impedance in zaslonskega slabljenja ali sklopnega slabljenja s triosno
celico - Dopolnilo A1 (IEC 62153-4-15:2021/AMD1:2024)
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic
compatibility (EMC) related test method for measuring transfer impedance and screening
attenuation or coupling attenuation with triaxial cell (IEC 62153-4-15:2021/AMD1:2024)
Prüfverfahren für metallische Kommunikationskabel und andere passive Bauteile - Teil 4
-15: Elektromagnetische Verträglichkeit (EMV) - Prüfverfahren zur Messung des
Kopplungswiderstandes und der Schirmdämpfung oder der Kopplungsdämpfung mit der
Triaxialen Zelle (IEC 62153-4-15:2021/AMD1:2024)
Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-15 :
Compatibilité électromagnétique (CEM) - Méthode d'essai pour le mesurage de
l'impédance de transfert et de l'affaiblissement d'écran ou de l'affaiblissement de
couplage avec cellule triaxiale (IEC 62153-4-15:2021/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 62153-4-15:2021/A1:2024
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62153-4-15:2021/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 33.100.10; 33.120.10
English Version
Metallic cables and other passive components test methods -
Part 4-15: Electromagnetic compatibility (EMC) related test
method for measuring transfer impedance and screening
attenuation or coupling attenuation with triaxial cell
(IEC 62153-4-15:2021/AMD1:2024)
Méthodes d'essai des câbles métalliques et autres Prüfverfahren für metallische Kommunikationskabel und
composants passifs - Partie 4-15 : Compatibilité andere passive Bauteile - Teil 4-15: Elektromagnetische
électromagnétique (CEM) - Méthode d'essai pour le Verträglichkeit (EMV) - Prüfverfahren zur Messung des
mesurage de l'impédance de transfert et de Kopplungswiderstandes und der Schirmdämpfung oder der
l'affaiblissement d'écran ou de l'affaiblissement de couplage Kopplungsdämpfung mit der Triaxialen Zelle
avec cellule triaxiale (IEC 62153-4-15:2021/AMD1:2024)
(IEC 62153-4-15:2021/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 62153-4-15:2021; it was approved by CENELEC on 2024-06-05. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62153-4-15:2021/A1:2024 E
European foreword
The text of document 46/992/FDIS, future IEC 62153-4-15/AMD1, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62153-4-
15:2021/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-06-05
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62153-4-15:2021/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.
IEC 62153-4-15 ®
Edition 2.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Metallic cables and other passive components test methods –
Part 4-15: Electromagnetic compatibility (EMC) related test method for
measuring transfer impedance and screening attenuation or coupling
attenuation with triaxial cell
Méthodes d'essai des câbles métalliques et autres composants passifs –
Partie 4-15: Compatibilité électromagnétique (CEM) – Méthode d'essai pour le
mesurage de l'impédance de transfert et de l'affaiblissement d'écran ou de
l'affaiblissement de couplage avec cellule triaxiale
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10, 33.120.10 ISBN 978-2-8322-8831-3
– 2 – IEC 62153-4-15:2021/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
METALLIC CABLES AND OTHER PASSIVE COMPONENTS
TEST METHODS –
Part 4-15: Electromagnetic compatibility (EMC) related test method for
measuring transfer impedance and screening attenuation or coupling
attenuation with triaxial cell
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...