29.100.01 - Components for electrical equipment in general
ICS 29.100.01 Details
Components for electrical equipment in general
Bauteile fur elektrische Gerate im allgemeinen
Composants pour materiel electrique en general
Sestavni deli za električne naprave na splošno
General Information
IEC 62321-3-4:2023 specifies procedures for the screening of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products by using high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS).
High performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) techniques are described in the normative part of this document. Fourier transform infrared spectroscopy (FT-IR) is described in the informative annexes of this document.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62321-3-4:2023 specifies procedures for the screening of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products by using high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS). High performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) techniques are described in the normative part of this document. Fourier transform infrared spectroscopy (FT-IR) is described in the informative annexes of this document.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62321-3-4:2023 specifies procedures for the screening of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products by using high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS).
High performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) techniques are described in the normative part of this document. Fourier transform infrared spectroscopy (FT-IR) is described in the informative annexes of this document.
- Standard107 pagesEnglish and French languagesale 15% off
IEC 62321-12:2023 specifies a reference test method for the simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers, and four phthalates: di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products. The extraction technique described in this document is the ultrasonic-assisted extraction used for simultaneous extraction for sample preparation. Gas chromatography-mass spectrometry (GC-MS) is considered as the reference technique for the measurement of the simultaneous determination of analytes in the range of 25 mg/kg to 2 000 mg/kg. The test method using ultrasonic-assisted extraction followed by GC-MS detection has been evaluated by the tests of polypropylene (PP), polyvinylchloride (PVC), acrylonitrile butadiene styrene (ABS), acrylate rubber (ACM), polystyrene (PS), polyurethane (PU) and polyethylene (PE) materials. This document has the status of a horizontal publication in accordance with IEC Guide 108.
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62321-12:2023 specifies a reference test method for the simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers, and four phthalates: di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products.
The extraction technique described in this document is the ultrasonic-assisted extraction used for simultaneous extraction for sample preparation.
Gas chromatography-mass spectrometry (GC-MS) is considered as the reference technique for the measurement of the simultaneous determination of analytes in the range of 25 mg/kg to 2 000 mg/kg.
The test method using ultrasonic-assisted extraction followed by GC-MS detection has been evaluated by the tests of polypropylene (PP), polyvinylchloride (PVC), acrylonitrile butadiene styrene (ABS), acrylate rubber (ACM), polystyrene (PS), polyurethane (PU) and polyethylene (PE) materials.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
- Standard75 pagesEnglish and French languagesale 15% off
IEC TS 62474-1:2022 is a guidance document to help organizations properly implement IEC 62474. These organizations can be the ones creating tools for material data exchange and those who submit and receive material declarations.
This document supports consistent implementation of IEC 62474, including how the procedures, content, and form relating to material declarations for products can be further specified. It also illustrates how to apply IEC 62474 to non-electrotechnical industries.
This document:
• illustrates the flexibility and functionality of the IEC 62474 standard including examples,
• illustrates how to achieve conformity with IEC 62474, including guidance on preparing a declaration for compliance and a composition declaration, including mandatory and optional declaration requirements,
• illustrates how IEC 62474 can be applied to non-electrotechnical industries by preparing material declarations using an alternate declarable substance list (DSL),
• supports organizations that create software to exchange substance and material data to implement IEC 62474 in their tools, and
• supports users that submit and receive material declarations.
Following the IEC 62474 standard scope, process chemicals, emissions during product use and product packaging material are not in the scope of this document.
IEC TS 62474-1:2022 cancels and replaces IEC TR 62474-1:2015.
This edition includes the following significant technical changes with respect to IEC TR 62474-1:2015:
a) IEC TR 62474-1:2015 was revised and converted to a Technical Specification in accordance with the requirements of the ISO/IEC Directives;
b) the introduction and scope have been updated to better align with the requirements of IEC 62474:2018;
c) by defining an authority, list identity and list version, the standard data exchange format can be used for lists other than the IEC 62474 database;
d) two types of material declarations, declaration for compliance and composition declaration, and their requirements are defined;
e) the material classes and exemption list capabilities have been improved;
f) guidance is provided on how to use data fields in the declaration of compliance and composition declaration to collect the information required for the European Chemical Agency (ECHA) Substances of Concern In articles, as such or in complex objects (Products) (SCIP) database;
g) six examples of material declaration are given to show how IEC 62474 meets various industry needs.
- Technical specification85 pagesEnglish languagesale 15% off
- Amendment10 pagesEnglish languagesale 10% offe-Library read for1 day
NEW!IEC 60730-2-14:2017 is available as IEC 60730-2-14:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-14:2017 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to controls for building automation within the scope of ISO 16484. This part 2-14 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. EXAMPLE Controls for commercial catering, heating and air-conditioning equipment. Electric actuators for appliances are within the scope of IEC 60335. This second edition cancels and replaces the first edition, published in 1995, its Amendment 1 (2001) and its Amendment 2 (2007). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: adapting it to the 5th Ed of IEC 60730-1, addition of checking electric actuators with action 1.AB or 2AB, and modification of tests under abnormal condition. This Part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the 5th edition of that standard (2013). Consideration may be given to future editions of, or amendments to, IEC 60730-1. This part 2-14 supplements or modifies the corresponding clauses in IEC 60730-1, so as to convert that publication into the IEC standard: Particular requirements for electric actuators. Where this part 2-14 states "addition", "modification" or "replacement", the relevant requirement, test specification or explanatory matter in part 1 should be adapted accordingly. Where no change is necessary part 2-14 indicates that the relevant clause or subclause applies. Key words: Automatic Controls, Electric Actuators
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment10 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard3 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.
- Technical report17 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.
- Technical report17 pagesEnglish languagesale 10% offe-Library read for1 day
This clause of Part 1 is replaced by the following: This European standard is applicable to the treatment of lamps. This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use mobile equipment.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility.
This Technical Specification addresses all operators that perform collection and logistics operations.
This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection or logistics facilities the Standard EN 50625-1 applies.
- Technical specification17 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility. This Technical Specification addresses all operators that perform collection and logistics operations. This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection or logistics facilities the Standard EN 50625-1 applies.
- Technical specification17 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, recovered, or disposed of. This standard addresses all operators involved in the treatment including related handling, sorting, and storage of WEEE.
- Standard38 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62211:2017 sets up a broad basis of electric and mechanical criteria of failure test procedures. This document is applicable to inductive components (chokes and transformers) based on magnetically soft materials. This edition includes the following significant technical changes with respect to the previous edition:
a) continuous shock and mechanical shock are integrated in the test conditions;
b) the normative references in Table 3 are changed.
- Standard15 pagesEnglish languagesale 15% off
- Standard30 pagesEnglish and French languagesale 15% off
This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
This part of IEC 60227 details the particular specifications for polyvinyl chloride insulated screened and unscreened control cables of rated voltages up to and including 300/500 V.[
]All cables comply with the appropriate requirements given in IEC 60227-1 and each individual type of cable complies with the particular requirements of this part.
- Standard9 pagesEnglish and French languagesale 15% off
This part of IEC 60050 gives the general terminology used in the various fields of electrotechnology (e.g. "electricity", "magnetism", "electronics", "device", "component", etc.), general terms pertaining to connections and connecting devices, terms pertaining to general purpose electric and magnetic devices such as resistors, transformers, relays etc., and terms related to the behaviour, the use, the tests and the operating conditions of these devices.
- Standard166 pagesEnglish and French languagesale 10% offe-Library read for1 day
- Standard30 pagesEnglish, French and Russian languagesale 10% offe-Library read for1 day
- Amendment2 pagesEnglish, French and Russian languagesale 10% offe-Library read for1 day
It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard166 pagesEnglish and French languagesale 15% off
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft44 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62321-12:2023 specifies a reference test method for the simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers, and four phthalates: di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products.
The extraction technique described in this document is the ultrasonic-assisted extraction used for simultaneous extraction for sample preparation.
Gas chromatography-mass spectrometry (GC-MS) is considered as the reference technique for the measurement of the simultaneous determination of analytes in the range of 25 mg/kg to 2 000 mg/kg.
The test method using ultrasonic-assisted extraction followed by GC-MS detection has been evaluated by the tests of polypropylene (PP), polyvinylchloride (PVC), acrylonitrile butadiene styrene (ABS), acrylate rubber (ACM), polystyrene (PS), polyurethane (PU) and polyethylene (PE) materials.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
- Draft35 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62474-1:2015(E) specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. It illustrates the flexibility and functionality of IEC 62474 using examples, supports organizations that create software to exchange substance and material data, supports users that submit and receive material declarations and is designed to support consistent implementation of IEC 62474. Clause 3 summarizes industry needs for material information and business benefits related to IEC 62474. Clause 4 provides case studies that describe the functionality of IEC 62474. Clause 5 provides detailed representations and XML files for the material declaration case studies included in Clause 4.
- Technical report72 pagesEnglish languagesale 15% off
- Technical report72 pagesEnglish languagesale 15% off
Superseded by EN 61241-10:2004
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the construction , testing and marking for Group II electrical apparatus with type of protection 'n', intended for use only in areas where explosive atmospheres of gas, vapour and mist are unlikely to occur or if they do occur, are likely to do so infrequently or for a short period only. This standard is applicable to non-sparking electrical apparatus and also to apparatus with parts or circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the ways specified in this standard, could be capable of igniting a surrounding explosive atmosphere. A non-incendive part is limited in use to the particular circuit for which it has been shown to be non-ignition capable and, therefore, cannot be separately assessed as complying with this standard. This standard is applicable to electrical equipment and components of Group II, Category 3G. Such equipment is designed to be capable of functioning in conformity with the operating parameters established by the manufacturer and ensuring a normal level of protection. Equipment in this category ensures the requisite level of protection during normal operation. NOTE 1: In this standard the word 'apparatus' has the same meaning as the word 'equipment' used in the Directive. Compliance with this European Standard does not imply any removal of, or lowering of, the requirements of any other European Standard with which the electrical apparatus complies. This standard supplements, and may supersede, the requirements for apparatus for normal industrial applications. NOTE 2: The application of this standard may require the exercise of engineering judgement because of the wide range of apparatus and technologies covered. If apparatus is to be certified the relevant requirements may need to be agreed between the manufacturer and the testing station
- Standard106 pagesEnglish languagesale 10% offe-Library read for1 day