ISO/TC 23/SC 14 - Operator controls, operator symbols and other displays, operator manuals

ISO 3767-4:2016 standardizes symbols for use on operator controls and other displays on forestry machinery.

ISO 3767-5:2016 standardizes symbols for use specifically on operator controls and other displays on manual portable forestry machines such as chain saws and brush saws.

ISO 3767-3:2016 standardizes symbols for use on operator controls and other displays on powered lawn and garden equipment.

ISO 3767-1:2016 standardizes symbols for use on operator controls and other displays applicable to multiple types of agricultural tractors and machinery, forestry machinery, and powered lawn and garden equipment.

ISO 3767-2:2016 standardizes symbols for use on operator controls and other displays on agricultural tractors and machinery.

ISO 3600:2015 specifies the content and gives guidance on the format of operator's manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals. Manuals intended for use by a service technician are not within the scope of this International Standard.

ISO 17080:2005 establishes principles and gives requirements for the design of single-panel product safety labels intended to be permanently affixed to manually portable agricultural and forestry machines and powered lawn and garden equipment.

Establishes general principles for the design and application of safety signs and hazard pictorials permanently affixed to tractors, machinery for agriculture and forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and ISO 5395. Outlines safety sign objectives, describes the basic safety sign formats and colours, and provides guidance on developing the various panels that together constitute a safety sign.

ISO 3767-2:2008 establishes symbols for use on operator controls and other displays on tractors and machinery for agriculture as defined in ISO 3339-0. The symbols given in ISO 3767-2:2008 are for controls and displays specific to agricultural tractors and machinery such as combine harvesters, cotton harvesters, and forage harvesters.

Gives guidance for the content and presentation of operator's manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. Replaces the second edition.

Cancels and replaces the first edition (1988). Establishes symbols for use on operator controls and other displays on powered lawn and garden equipment.

Adds and replaces, on pages 3, 5, 6, 7, 13 and 15 symbols.

Establishes 113 graphical symbols uniquely for use on operator controls and other displays on specialized forestry machinery as defined in ISO 6814, such as log loaders. Also included are symbols for controls and displays specific to equipment such as saws, stabilizers and winches.

Defines and describes 8 symbols for fuel and oil mixture, chain oil fill/oil pump, heated handle, carburettor adjustments, manual start and emergency stop.

Gives 65 symbols which are presented with 32 % of original size and defines the various colours to be used. This second edition cancels and replaces the first edition (1982). Annex A is for information only.

This second edition cancels and replaces the first edition (1982). Specifies the type, location and method of operation (including direction of motion) of controls for equipment having a width of cut greater than 300 mm. The controls are divided two categories: - ride-on machinery; - pedestrian-operated machines. The control location and method of operatio in this part are supplementary to the requirements established in ISO 3789/1. The controls included in this part are those are located at the operator's normal working position.

Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; - pedestrian-operated machines. The control location and method of operation in this part are supplementary to the requirements established in ISO 3789/1. The controls included in this part are those which are located at the operator's normal working position.

Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; -pedestrian-operated machines. The controls included in this part are those which are located at the operator's normal working position.