iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 45510-4-10:1999

(Main)

Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant

Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant

This standard gives guidance on writing the technical specification for the procurement of processes and equipment for the removal of nitrogen oxides from the flue gas of steam generating plant for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 4-10: Nebenanlagen - Rauchgas-Nox-Minderungsanlage (DeNox)

Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von Verfahren und Anlagen zur Entfernung von Stickstoffoxiden aus dem Rauchgas von Dampferzeugungsanlagen für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen.

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 4-10: Auxiliaires de chaudière - Installation de dénitrification des fumées (DéNOx)

La présente norme donne des recommandations pour la rédaction de la spécification technique nécessaire à l'acquisition de procédés et équipements pour l'élimination des oxydes d'azote des fumées des générateurs de vapeur pour les centrales de production d'électricité. Ce guide d'achat n'est pas applicable à ce type d'équipement lorsque celui-ci est destiné à l'îlot nucléaire des centrales nucléaires. D'autres applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide.

Guide for procurement of power station equipment - Part 4-10: Boilers auxiliaries - Flue gas denitrification (De-NOx) plant

General Information

Status
Published
Publication Date
19-Oct-1999
Withdrawal Date
29-Apr-2000
ICS
13.040.40 - Stationary source emissions
27.040 - Gas and steam turbines. Steam engines
27.100 - Power stations in general
Technical Committee
CEN/CLC/JTC 2 - Power Engineering
Drafting Committee
IEC/TC 5 - Steam Turbines
Parallel Committee
CENCLC/TC 2 - CENCLC_TC_2
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Mar-2018
Completion Date
04-Mar-2018
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/92/10 - Mandate to CEN/CENELEC in the field of electricity generation for the drawing-up of European standards to be used as procurement guides in public contracts and for the preparation of a programme of supporting standards
Ref Project
SIST EN 45510-4-10:2000 - Guide for procurement of power station equipment -- Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant

Relations

Parent
EN 45510-4-6:1999 - Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant
Effective Date
24-Mar-2020

Buy Standard

EN 45510-4-10:2000EN 45510-4-10:2000
PreviousNext
Standard
EN 45510-4-10:2000
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 4-10: Boilers auxiliaries - Flue gas denitrification (De-NOx) plantLeitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 4-10: Nebenanlagen - Rauchgas-NOx-Minderungsanlage (DeNOx)Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 4-10: Auxiliaires de chaudière - Installation de dénitrification des fumées (DéNOx)Guide for procurement of power station equipment -- Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant27.100Elektrarne na splošnoPower stations in general27.060.30Grelniki vode in prenosniki toploteBoilers and heat exchangers13.040.40Stationary source emissionsICS:Ta s
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 45510-4-6:1999(Main)
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant
SIST EN 45510-4-6:2000

This standard gives guidance on writing the technical specification for the procurement of processes and equipment for the removal of sulphur oxides from the flue gas of steam generating plant for use in electricity generations stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-4-1:1999(Main)
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions
SIST EN 45510-4-1:2000

This standard gives guidance on writing the technical specification for the procurement of dust emission reduction equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-4-6:1999(Main)
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant
SIST EN 45510-4-6:2000

This standard gives guidance on writing the technical specification for the procurement of processes and equipment for the removal of sulphur oxides from the flue gas of steam generating plant for use in electricity generations stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 45510-4-1:1999(Main)
Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 1: Equipment for reduction of dust emissions
SIST EN 45510-4-1:2000

This standard gives guidance on writing the technical specification for the procurement of dust emission reduction equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61535:2024(Main)
Installation couplers intended for permanent connection in fixed installations
SIST EN IEC 61535:2024

IEC 61535:2023 is available as IEC 61535:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61535:2023 applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of a definition for "live part" based on IEC 61140; b) additional optional cross medial documentation, e.g. marking with QR-Code; c) corrections on the consistent use of the expressions "earth", "earthing contact", "earthing circuit" and "protective earth(ing)" throughout the document; d) addition of missing compliance provisions to 13.3; e) update of Figure D.1 of Annex D; f) inclusion of new Annex F for cold climate requirements.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61674:2024(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
SIST EN IEC 61674:2024

IEC 61674:2024 specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in medical X-ray imaging, such as RADIOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-RADIATION with generating potentials in the range of 20 kV to 150 kV. This document is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging. IEC 61674:2024 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) for mammography, the manufacturer specifies the REFERENCE VALUE for the RADIATION QUALITY; b) for mammography, the manufacturer provides the MINIMUM RATED RANGE of RADIATION QUALITIES for the compliance test on energy dependence of response; c) the compliance test for analogue displays was removed; d) the compliance tests for range reset, the effect of leakage and recombination losses were removed. These tests are already covered by the test on linearity and cannot be conducted for modern devices. The estimation of COMBINED STANDARD UNCERTAINTY was changed accordingly; e) the compliance test for mains rechargeable and battery-operated dosimeters were updated for modern devices

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-8-201:2024(Main)
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
SIST EN IEC 62282-8-201:2024

IEC 62282-8-201:2024 is available as IEC 62282-8-201:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-8-201:2024 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). It specifies performance evaluation methods for electric energy storage systems using hydrogen that employ electrochemical reactions both for water and steam electrolysis and electric power generation. This document is intended for power-to-power systems which typically employ a set of electrolyser and fuel cell, or a reversible cell for devices of electric charge and discharge. This second edition cancels and replaces the first edition published in 2020. This edition includes the following significant technical changes with respect to the previous edition: a) consideration of systems connected to hydrogen supply infrastructure (hydrogen grids, vessels, caverns or pipelines); b) hydrogen input and output rate is added in the system parameters (5.10); c) electric energy storage capacity test is revised (6.2); d) roundtrip electrical efficiency test is revised (6.5); e) hydrogen input and output rate test is added (6.6.6).

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63128:2019/A1:2024(Amendment)
Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear
SIST EN IEC 63128:2019/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60670-22:2006/A11:2024(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
SIST EN 60670-22:2007/kprAA:2022

To cover requirements for boxes and enclosures with provision for suspension means

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60422:2024(Main)
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
kSIST FprEN IEC 60422:2024

IEC 60422:2024 provides monitoring guidance and procedures that are required for the use and maintenance of mineral insulating oils and other hydrocarbon-based liquids in transformers and other electrical equipment, including strategic spares and tanks for holding spare parts and components. This document is applicable to mineral insulating oils, originally supplied conforming to IEC 60296, in transformers, switchgear and other electrical apparatus where oil sampling is reasonably practicable, and where the normal operating conditions specified in the equipment specifications apply. This document is also intended to assist the power equipment operator to evaluate the condition of the oil and maintain it in a serviceable condition. It also provides a common basis for the preparation of more specific and complete local codes of practice. The document includes recommendations on tests and evaluation procedures, and outlines methods for reconditioning and reclaiming oil, and the decontamination of oil contaminated with PCBs. NOTE The condition monitoring of electrical equipment, for example by analysis of dissolved gases, furanic compounds or other means, is outside the scope of this document.

  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day