59.120.30 - Looms. Weaving machines
ICS 59.120.30 Details
Looms. Weaving machines
Webmaschinen. Webstuhle
Métiers. Machines a tisser
Statve. Tkalni stroji
General Information
This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed knitting;
warp knitting;
raschel;
cotton (flat weft weaving);
other fabric manufacturing machines e.g.:
multi-phase weaving machines;
circular weaving machines;
stitch bonding machines.
NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively. It is applicable to: full-width weaving machines with weft insertion by: shuttles; rigid, telescopic or flexible rapiers; projectiles; hydraulic (waterjet) or by pneumatic (airjet) nozzle; narrow fabric weaving machines with weft insertion by shuttles or needles; jacquard machines; knitting machinery including: circular knitting; flat bed knitting; warp knitting; raschel; cotton (flat weft weaving); other fabric manufacturing machines e.g.: multi-phase weaving machines; circular weaving machines; stitch bonding machines. NOTE Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment9 pagesEnglish languagesale 10% offe-Library read for1 day
2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment9 pagesEnglish languagesale 10% offe-Library read for1 day
2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
ISO 13435:2011 specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner split contact rail (form E2).
- Standard3 pagesEnglish languagesale 15% off
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
ISO 366-2:2009 specifies the dimensions and designation of metal reeds with plate baulk for weaving machines.
- Standard3 pagesEnglish languagesale 15% off
ISO 366-3:2009 specifies the dimensions and designation of metal reeds with double-spring baulk for weaving machines.
- Standard3 pagesEnglish languagesale 15% off
ISO 9473-1:2006 specifies the dimensions and the designation of cold rolled strip steel used to manufacture dents of reeds according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
ISO 366-5:2006 specifies the dimensions and designation of profile capsules for weaving machine reeds. These capsules are used to manufacture plastic-bound metal reeds according to ISO 366-4.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
ISO 9473-2:2006 specifies the dimensions and the designation of hardened strip steel used to manufacture dents of reeds, according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
ISO 363-2:2006 specifies the main dimensions and tolerances of flat steel healds with closed end loops (O-shaped end loops) manufactured of hardened strip steel for use in the textile industry.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
ISO 363-1:2006 specifies the main dimensions of flat steel healds with closed end loops (O-shaped end loops) manufactured of rolled steel wire for use in the textile industry.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
ISO 8118-1:2006 defines the basic terms and gives the nomenclature, technical specifications and designation for weaving machine temple cylinders used in the textile industry.
- Standard4 pagesEnglish languagesale 15% off
ISO 8118-2:2006 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the textile industry.
- Standard3 pagesEnglish languagesale 15% off
ISO 15228:2005 specifies the dimensions and designation for reeds used for air jet weaving machines.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
ISO 366-4:2005 specifies the dimensions and designation of plastic-bound metal reeds for weaving machines.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This part of ISO 11111 is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers, users, systems integrators, safety experts. This part is applicable to machinery plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This part of ISO 11111 is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers, users, systems integrators, safety experts. This part is applicable to machinery plant and related equipment intended to be used for weaving, knitting and tufting.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 5247-1:2004 establishes a vocabulary of terms and a system of classification for weaving machines used in the textile industry for the production of woven fabrics by the weaving technique, i.e. by interlacing of two (or more) systems of parallel threads, and by machines using hybrid forming methods.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesEnglish and French languagesale 15% off
ISO 5243:2004 gives the principle for the numbering of the heald frames and drop wire bars of the warp stop motions in a loom.
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
- Standard1 pageFrench languagesale 15% off
ISO 14500:2003 defines terms related to harnesses for Jacquard weaving machines used in the textile industry, with the aim of presenting a standardized, prescribed phraseology. It identifies the parts of, and positions on, the harness and establishes a nomenclature for those parts.
- Standard12 pagesEnglish languagesale 15% off
This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires without automatic drawing-in.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires suited for automatic drawing-in systems. These drop wires are always closed with an U-shaped thread eylet.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed to the frame stave by rod support.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
Specifies the dimensions of guides for heald frames, which are used for supplemental guidance of heald frames.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed directly on the frame stave.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
Speficies the main dimensions and tolerances of flat steel healds with open end loops (J-shaped end loops) for use in the textile industry.
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
- Standard2 pagesFrench languagesale 15% off