ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories

ISO 12912:2014 establishes a vocabulary of terms and a system of classification for circular knitting machines used in the textile industry for the production of weft-knitted fabrics.

ISO 11676:2014 defines terms and marking of pattern disks and patterns chains for warp knitting machines.

ISO 13435:2011 specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner split contact rail (form E2).

ISO 366-2:2009 specifies the dimensions and designation of metal reeds with plate baulk for weaving machines.

ISO 366-3:2009 specifies the dimensions and designation of metal reeds with double-spring baulk for weaving machines.

ISO 8116-2:2008 specifies the main dimensions, mechanical strength, permissible tolerances of form and position of the main elements of warper's beams, and the driving devices and designation for warper's beams with and without shafts.

ISO 8116-4:2008 specifies the test procedure for flanges for weaver's beams, warper's beams and sectional beams and the quality classes in this respect.

ISO 8116-5:2008 specifies the main dimensions, mechanical strength, designation and permissible values of tolerances of form and position for the main elements of sectional beams for warp knitting machines.

ISO 8116-3:2008 specifies the main dimensions, mechanical strength and permissible tolerances of form and position for weaver's beams that are used for weaving preparation as well as for weaving. The main dimensions of the profile threads for weaver's beams and the specifications for connections for automation of beam changing are also given.

ISO 8121:2007 specifies the minimum information for the nameplates on knitting machines used in the textile industry.

ISO 8188:2007 specifies the pitches for knitting machines used in the textile industry.

ISO 366-5:2006 specifies the dimensions and designation of profile capsules for weaving machine reeds. These capsules are used to manufacture plastic-bound metal reeds according to ISO 366-4.

ISO 9473-2:2006 specifies the dimensions and the designation of hardened strip steel used to manufacture dents of reeds, according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.

ISO 9473-1:2006 specifies the dimensions and the designation of cold rolled strip steel used to manufacture dents of reeds according to ISO 366-1, ISO 366-2, ISO 366-3, and 366-4.

ISO 363-2:2006 specifies the main dimensions and tolerances of flat steel healds with closed end loops (O-shaped end loops) manufactured of hardened strip steel for use in the textile industry.

ISO 363-1:2006 specifies the main dimensions of flat steel healds with closed end loops (O-shaped end loops) manufactured of rolled steel wire for use in the textile industry.

ISO 13990-2:2006 specifies the connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices, as defined in ISO13990-1, for knitting machines.

ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.

ISO 8118-1:2006 defines the basic terms and gives the nomenclature, technical specifications and designation for weaving machine temple cylinders used in the textile industry.

ISO 8118-2:2006 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the textile industry.

ISO 10223:2005 specifies the designation and the numbering of guide bars for flat warp knitting machines.

ISO 15228:2005 specifies the dimensions and designation for reeds used for air jet weaving machines.

ISO 366-4:2005 specifies the dimensions and designation of plastic-bound metal reeds for weaving machines.

ISO 5243:2004 gives the principle for the numbering of the heald frames and drop wire bars of the warp stop motions in a loom.

ISO 8122:2003 specifies the usual number of needles for single-face, double-face and "links-links" circular knitting machines of large nominal diameter, in terms of the needle pitch or gauge E and the machine nominal diameter, and is able to be used as a basis for the comparison of fabrics knitted on these machines. It is not applicable to circular knitting machines with a selection of single needles.

ISO 8117:2003 specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.

Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires suited for automatic drawing-in systems. These drop wires are always closed with an U-shaped thread eylet.

Specifies the dimensions, tolerances and designation of drop wires for mechanical, electromechanical and electrical warp stop motions for weaving machines. Does apply only to drop wires without automatic drawing-in.

Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed directly on the frame stave.

Specifies the dimensions of guides for heald frames, which are used for supplemental guidance of heald frames.

Specifies the coordinated dimensions of heald frames on which the heald-carrying rod is fixed to the frame stave by rod support.

Speficies the main dimensions and tolerances of flat steel healds with open end loops (C-shaped end loops) for use in the textile industry.

Cancels and replaces the first edition (1978). Establishes terminology for warp creels and specifies their main dimensions.

Speficies the main dimensions and tolerances of flat steel healds with open end loops (J-shaped end loops) for use in the textile industry.

Specifies the terminology, principal dimensions (for overall diameters from 400 mm to 1 200 mm) and designation of dyeing beams. Figure 1 and 2 illustrate the principal dimensions given in Table 1.

Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.

Specifies the types of twin heald wires and lays down the dimensions. Contains directions for the designation and gives an example for designation. The main characteristics are described by means of figures. - Replaces ISO Recommendation R 364-1967, and constitutes an technical revision thereof.

The main dimensions and the co-ordination of cited heald carrying rods are specified. The length of end loops and the width of end loops of flat steel healds of twin wire healds are shown in figures. Heald carrying rods, type A and type B, are described (figures and tables). Examples of designation are contained. - Replaces ISO Recommendation R 570-1967 and constitutes its technical revision.

Defines the working width as well as other terms which relate to the main dimensions of the working widths of weaving machines. Applicable to weaving machines with or without shuttles, such as weaving machines with projectiles or rapiers. - Replaces ISO Recommendation R 109-1968 and constitutes its technical revision.

Establishes the main dimensions. The following types are shown: figure 1 - type A heald, with upper and lower end loops, O-shaped; figure 2a) - type B heald with upper end loop straight to be bent in U-shape; lower end loop, O-shaped; and figure 2b) - type B heald with upper end loop bent in U-shape, lower end loop, O-shaped. - Replaces the first edition (ISO 365-1976).

Intended for the determination of the left and right side of weaving looms. To determine the side of weaving loom the observer looks against the chain let-off directions.

Specifies left and right sides of weaving preparation machines. To determine the sides of the machine, the observer looks against the direction of thread feeding. In figures are shown beam warping machine, cone warping machine and beaming machine, and warp sizing machine. - Replaces ISO Recommendation R 142-1960.

Defines for a definite cylinder of a cone sectional warping machine by means of a figure the maximum usable width of the chain on the cylinder. - Replaces ISO Recommendation R 2012-1971.

Gives the main dimensions and designation of heald-carrying rods for C- and J-shaped end loops of flat steel healds which are in accordance with ISO 11677-1 and ISO 11677-2.

Specifies appropriate dimensions for shank widths and hook heights of latch needles used in the knitting industry.

Defines the basic terms and designation and lays down the main dimensions as well as the driving devices for perforated beams used for dyeing slivers, rovings or yarns. This edition cancels and replaces ISO 1037, which has been technically revised.

Defines variations of form and position of beams for winding and gives methods of measuring such variations of form and position. The variations are related to axial circular run-out tolerance of flanges and total barrel run-out tolerance of beams with and without shafts. This edition cancels and replaces ISO 2013, which has been technically revised.

Defines the basic terms and designation for sectional beams for warp knitting machines and lays down the main dimensions as well as the maximum values of variation of form and position for the main elements of these beams. Cancels and replaces the first edition, which has been technically revised.

Defines the basic terms and lays down the main dimensions and the variations in form and position for weaver's beams that are used for weaving preparation as well as weaving. Furthermore the main dimensions of the threads for weaver's beams are given. Cancels and replaces the first edition, which has been technically revised.

Defines the basic terms and designation and lays down the main dimensions as well as the variation of form and position for beams for ribbon weaving and ribbon knitting. Cancels and replaces the first edition, which has been technically revised.