ISO 2012:1976
(Main)Textile machinery and accessories - Cone sectional warping machines - Maximum usable width
Textile machinery and accessories - Cone sectional warping machines - Maximum usable width
Defines for a definite cylinder of a cone sectional warping machine by means of a figure the maximum usable width of the chain on the cylinder. - Replaces ISO Recommendation R 2012-1971.
Matériel pour l'industrie textile — Ourdissoirs sectionnels à cônes — Largeur maximale utilisable
General Information
- Status
- Published
- Publication Date
- 31-Jul-1976
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 09-Sep-2024
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 06-Jun-2022
Overview
ISO 2012:1976 specifies the maximum usable width of the warp for a given cylinder used in cone sectional warping machines. Published as the first edition in August 1976, this International Standard replaces ISO Recommendation R 2012‑1971 and gives a uniform way to designate cylinder widths for sectional warping equipment. It is intended for use where a definite cylinder of a cone sectional warping machine is defined and documented.
Key topics
- Scope: Defines the maximum usable width of the chain (warp) on a particular cylinder of a cone sectional warping machine.
- Designation: Cylinders are designated by the maximum usable warp width followed by the reference to this standard.
- Example: Cylinder of sectional warping machine, 2600, ISO 2012.
- Standardized widths (millimetres): The standard lists accepted maximum usable-width values. Values appearing in parentheses are legacy sizes that should be avoided where possible and are retained only to account for cylinders already in service. Standard values include:
- (1400), 1800, (2000), 2200, (2400), 2600, (2800), 3000, 3400, 3800, 4200
- Notes on legacy sizes: Parenthesized values are included for compatibility with existing equipment but are not recommended for new designs.
Applications
ISO 2012 is practical for professionals who need a clear, repeatable definition of warping cylinder widths, including:
- Textile machinery manufacturers specifying or labeling cone sectional warping machine cylinders.
- Plant designers and production engineers planning loom and warping-room layouts and ensuring component compatibility.
- Procurement and maintenance teams creating purchase specifications, spare-parts lists, and retrofit/upgrade plans.
- Standards and compliance personnel documenting machine characteristics in technical data sheets and ensuring consistency across equipment from different vendors.
Using ISO 2012 helps ensure consistency in machine specifications, simplifies communication between manufacturers and users, and supports interoperability and replacement of cylinders in cone sectional warping machines.
Related standards
- Originated from ISO Recommendation R 2012‑1971; transformed into International Standard ISO 2012:1976.
- Developed under ISO Technical Committee ISO/TC 72 (Textile machinery and accessories), which oversees related dimensional and specification standards for textile machinery.
Keywords: ISO 2012, textile machinery, cone sectional warping machines, maximum usable width, cylinder width, warping machines, textile warpers, machine dimensions.
ISO 2012:1976 - Textile machinery and accessories -- Cone sectional warping machines -- Maximum usable width
ISO 2012:1976 - Matériel pour l'industrie textile -- Ourdissoirs sectionnels a cônes -- Largeur maximale utilisable
ISO 2012:1976 - Matériel pour l'industrie textile -- Ourdissoirs sectionnels a cônes -- Largeur maximale utilisable
Frequently Asked Questions
ISO 2012:1976 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery and accessories - Cone sectional warping machines - Maximum usable width". This standard covers: Defines for a definite cylinder of a cone sectional warping machine by means of a figure the maximum usable width of the chain on the cylinder. - Replaces ISO Recommendation R 2012-1971.
Defines for a definite cylinder of a cone sectional warping machine by means of a figure the maximum usable width of the chain on the cylinder. - Replaces ISO Recommendation R 2012-1971.
ISO 2012:1976 is classified under the following ICS (International Classification for Standards) categories: 59.120.30 - Looms. Weaving machines. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 2012:1976 has the following relationships with other standards: It is inter standard links to ISO 6529:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 2012:1976 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l ME’WCAYHAPOAHAIl OPI-AHM3ALUM l-IO Cl-AHAAPTTM3ALV-iM~ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery and accessories - Cone sectional warping
machines - Maximum usable width
Ma t&-iel pour t ‘indus trie textile - Ourdissoirs sec tionnels 2 c6nes - Largeur maximale u tilisable
First edition - 1976-08-01
Ref. No. ISO 20124976 (E)
UDC 677.053.73
Descriptors : textile machinery, warpers, specification, dimensions, width.
Price based on 1 page
SS0 (tke International Organization for Standardization) is a worldwide federaiion
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right 10 be represented on that Committee. International organizations,
governmental and non-governmental, in liaison wiith ISO1 also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approvai before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the work of the Technlcal Committees were published
as 6SO Recommendations; These documents are now in the process of beirigg
transformed into international Standards. As pat-t of this process, Technical
Committee lSO/TC 72 has reviewed ISO Recommendation R 2012 and found it
tachnically suitable for transformation. International Standard ISO 2012 rherefore
replaces 60 Recommendation R 2012-1971 to which it is technically identical.
ISO Recommendation R 2
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXJYHAI’O,!lHAfi OPrAHM3AUM~ l-l0 CTAHLlAPTM3ALIMM -ORGANISATION INTERNATIONALE DE NORMALISATIGN
Matériel pour l’industrie textile - Ourdissoirs Sectionne)s
- Largeur maximale utilisable
à cônes
Cone sectional warping machines - Maximum usable width
Textile machinery and accessories -
Première édition - 1976-08-01
Réf. no : ISO 2012-1976 (F)
CDU 677.053.73
Descripteurs : matériel textile, ourdissoir, spécification, dimension, largeur.
Prix basé sur 1 page
AVANT-PRQPOS
LIS0 (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration des
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 72 a examiné la Recommandation ISO/R 2012 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la Recommandation
ISO/R 2012-1971 à laquelle elle est techniquement identique.
La Recommandation ISO/R 2012 avait été
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXJYHAI’O,!lHAfi OPrAHM3AUM~ l-l0 CTAHLlAPTM3ALIMM -ORGANISATION INTERNATIONALE DE NORMALISATIGN
Matériel pour l’industrie textile - Ourdissoirs Sectionne)s
- Largeur maximale utilisable
à cônes
Cone sectional warping machines - Maximum usable width
Textile machinery and accessories -
Première édition - 1976-08-01
Réf. no : ISO 2012-1976 (F)
CDU 677.053.73
Descripteurs : matériel textile, ourdissoir, spécification, dimension, largeur.
Prix basé sur 1 page
AVANT-PRQPOS
LIS0 (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration des
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 72 a examiné la Recommandation ISO/R 2012 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la Recommandation
ISO/R 2012-1971 à laquelle elle est techniquement identique.
La Recommandation ISO/R 2012 avait été
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...