ISO 8117:2003
(Main)Textile machinery - Knitting machines - Nominal diameters of circular machines
Textile machinery - Knitting machines - Nominal diameters of circular machines
ISO 8117:2003 specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.
Matériel pour l'industrie textile — Machines à tricoter — Diamètres nominaux des machines circulaires
L'ISO 8117:2003 spécifie les diamètres nominaux des machines à tricoter circulaires et les désignations numériques correspondant aux dimensions des machines. Elle est applicable aux machines à tricoter circulaires de petit diamètre et de grand diamètre et aux machines dites «mailleuses».
General Information
- Status
- Published
- Publication Date
- 24-Feb-2003
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 18-Nov-2024
- Completion Date
- 13-Dec-2025
Relations
- Revises
ISO 8117:1986 - Textile machinery - Knitting machines - Nominal diameters of circular machines - Effective Date
- 15-Apr-2008
Overview
ISO 8117:2003 is an international standard developed by the International Organization for Standardization (ISO) that specifies the nominal diameters and numerical designations of circular knitting machines. This standard applies to both small- and large-diameter circular knitting machines, including sinker machines. It provides a clear classification and dimensioning system essential for manufacturers, engineers, and users in the textile machinery industry.
The standard helps ensure consistency and interoperability across different machine manufacturers by establishing uniform measurement criteria for circular knitting machines, a key component in the fabric manufacturing process.
Key Topics
- Nominal Diameters: ISO 8117:2003 defines nominal diameters in millimeters for circular knitting machines, covering a broad range from small to large machines.
- Numerical Designations: It maps each nominal diameter to a specific numerical designation that corresponds to the size of the machine.
- Applicability: The standard is relevant to all types of circular knitting machines, including sinker machines, which are widely used in textile manufacturing.
- Reference to Related Standards: The standard cross-references ISO 7839 for classification and vocabulary of knitting machines and ISO 8188 for needle pitches, integrating a comprehensive framework for knitting machine specifications.
- Avoidance of Specific Sizes: ISO suggests avoiding certain machine diameters indicated in brackets to facilitate better industry standardization.
Applications
ISO 8117:2003 facilitates several practical uses within the textile and machinery manufacturing sectors:
- Machine Design and Development: Engineers use the nominal diameter classifications to design and build circular knitting machines that conform to global standards.
- Purchase and Supply Chain: Buyers and suppliers can reliably specify and identify machine sizes, ensuring compatibility and efficient procurement.
- Maintenance and Repair: Standardized measurements allow for accurate parts replacement and maintenance scheduling for circular knitting machines.
- Quality Control: Manufacturers and industry inspectors apply the standard to verify machine sizes during quality assurance processes.
- International Trade: Helps streamline export and import documentation by providing universally accepted specifications.
Related Standards
ISO 8117:2003 is part of a wider suite of ISO standards concerning textile machinery:
- ISO 7839 – Textile machinery and accessories: Provides classification and vocabulary for knitting machines, supporting clear communication across the industry.
- ISO 8188 – Textile machinery and accessories: Establishes the pitch of knitting machine needles, essential for understanding machine knitting capabilities.
- ISO/TC 72 – The technical committee responsible for textile machinery, offering ongoing updates and new standards related to textile manufacturing equipment.
By adhering to ISO 8117:2003, manufacturers and users of circular knitting machines benefit from enhanced clarity, interchangeability, and global recognition that optimize production efficiency and quality in the textile industry. Keywords such as "circular knitting machines," "nominal diameters," "textile machinery standards," and "knitting machine sizes" are vital for professionals seeking reliable and standardized information in this sector.
ISO 8117:2003 - Textile machinery -- Knitting machines -- Nominal diameters of circular machines
ISO 8117:2003 - Matériel pour l'industrie textile -- Machines a tricoter -- Diametres nominaux des machines circulaires
Frequently Asked Questions
ISO 8117:2003 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery - Knitting machines - Nominal diameters of circular machines". This standard covers: ISO 8117:2003 specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.
ISO 8117:2003 specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.
ISO 8117:2003 is classified under the following ICS (International Classification for Standards) categories: 59.120.40 - Knitting machines. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 8117:2003 has the following relationships with other standards: It is inter standard links to ISO 8117:1986. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 8117:2003 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 8117
Second edition
2003-02-15
Textile machinery — Knitting
machines — Nominal diameters of
circular machines
Matériel pour l'industrie textile — Machines à tricoter — Diamètres
nominaux des machines circulaires
Reference number
©
ISO 2003
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 7
...
NORME ISO
INTERNATIONALE 8117
Deuxième édition
2003-02-15
Matériel pour l'industrie textile —
Machines à tricoter — Diamètres
nominaux des machines circulaires
Textile machinery — Knitting machines — Nominal diameters of circular
machines
Numéro de référence
©
ISO 2003
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2003
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2003 — Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'at
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...