ISO 6177:1986
(Main)Textile machinery - Cloth rollers - Terminology and main dimensions
Textile machinery - Cloth rollers - Terminology and main dimensions
Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.
Matériel pour l'industrie textile — Rouleaux magasins — Terminologie et dimensions principales
General Information
Relations
Overview
ISO 6177:1986 - Textile machinery - Cloth rollers - Terminology and main dimensions - defines basic terminology, main geometric dimensions and designation rules for cloth rollers used to wind fabrics and to feed downstream textile machines. This second edition updates clause 3.2 from the 1983 edition and provides standardized symbols, dimensional parameters and an example of how to designate rollers for procurement, design and documentation.
Key topics
- Terminology and symbols: standardizes names and symbols for key features (outside diameter, shaft/mandrel diameters, pitch circle diameter for driving holes, driving-hole diameter and depth, boss/collar width and lengths, collar-to-collar distance, shaft length).
- Main dimensions: gives preferred nominal outside diameters (examples shown include 100, 120, 150 mm) and rules for lengths and dimensional steps (length increments and provisions for larger diameters). For diameters above 150 mm the standard refers users to relevant barrel dimensions in other textile standards.
- Designation format: specifies the sequence of information required in a roller designation: name, ISO reference, roller type (e.g., Type A, Type B), outside diameter, roller length, and collar-to-collar distance (type A). Example: “Rouleau magasin ISO 6177 - A - 100 x 2 000 x 2 010”.
- Specification details to declare: construction and end-piece type (Type A or B), material to be wound, surface finish or covering (e.g., felt, rubber), groove type, and for Type B the square shaft section if other than the standard 50 × 50 mm.
- Multilingual terms: defines English, French and Russian official ISO terms and includes German equivalents for committee use (official ISO terms remain the three ISO languages).
Applications
ISO 6177 is directly useful for:
- Textile machinery manufacturers designing winding and feeding rollers
- Roller and shaft fabricators producing standard cloth rollers
- Machine designers and OEMs specifying component interfaces
- Procurement and QA teams ensuring interchangeability and correct ordering
- Maintenance engineers replacing rollers with correct dimensions and designations
Keywords: ISO 6177, cloth rollers, textile machinery, roller dimensions, roller designation, cloth roller terminology.
Related standards
The standard cross-references and complements other textile equipment standards such as:
- ISO 5241 (ensouples / winding packages)
- ISO 8116-2 (barrel dimensions for beams)
- Other ISO textile machinery standards referenced in the document for larger-diameter rollers and detailed barrel dimensions
For specific manufacturing tolerances or expanded dimensional tables consult the referenced ISO documents and the current editions.
Frequently Asked Questions
ISO 6177:1986 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery - Cloth rollers - Terminology and main dimensions". This standard covers: Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.
Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.
ISO 6177:1986 is classified under the following ICS (International Classification for Standards) categories: 59.120.30 - Looms. Weaving machines. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 6177:1986 has the following relationships with other standards: It is inter standard links to ISO 14688-1:2002, ISO 6177:1983. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 6177:1986 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIKfiYHAPOAHAR OPrAHM3ALWIR I-IO CTAHAAPTM3AlWlWRGANISATION INTERNATIONALE DE NORMALlSATlON
Textile machinery - Cloth rollers - Terminology
,
and main dimensions
Mat&ie/ pour l’industrie textiie - Rouieaux magasins - Terminologie et dimensions principaies
Second edition - 1986-05-15
Ref. No. ISO 61774986 (E)
UDC 677.0543256
w
-
winders, rollers, definitions, dimensions, designation.
6) Descriptors : textile machinery,
v--
I
R
rö
cn
Price based on 4 pages
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft ,International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 6177 was prepared by Technical Committee ISO/TC 72,
Textiie machinery and aiiied machinery and accessories.
This second edition cancels and replaces the first edition (ISO 6177-19831, clause 3.2 of
which has been technically revised.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
International Organkation for Standardkation, 1986
Printed in Switzerland
ISO 61774986 (EI
INTERNATIONAL STANDARD
Textile machinery - Cloth rollers - Terminology
I
and main dimensions
1 Scope and field of application
2 References
This International Standard defines the basic terms, lays down
ISO 109, TextJe machinery - Working widths of weaving
the main dimensions and gives specifications of cloth rollers
machines.
used for winding fabrics and feeding subsequent machines.
NOTE - In addition to terms given in the three official ISO languages ISO 5241, Textiie machinery and accessories - Weaver’s
(English, French, and Russian), this International Standard also gives
beams - Terminoiog y and main dimensions.
the equivalent terms in German; these terms have been included at the
request of ISO/TC 72 and are published under the responsibility of the
ISO 8116/2, Textile machinery and accessories - Beams for
member bodies for the Federal Republic of Germany (DIN) and
winding - Part 2: Warper3 beams - Terminology and main
Switzerland (SNV). However, only the terms and definitions given in
the official languages may be considered as ISO terms and definitions. dimensions.
ISO 61774986 (E)
3 Terminology and
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(AYHAPOAHAR OPI-AHM3ALWlR f-l0 CTAHAAPTM3ALWl*ORGANISATION INTERNATIONALE DE NORMALISATION
Matériel pour l’industrie textile - Rouleaux magasins -
Terminologie et dimensions principales ’
Textile machinery - Cloth rollers - Terminolog y and main dimensions
Deuxième édition - 1986-05-15
Réf. no : ISO 61774986 (FI
GI CDU 677.054.825.6
-
: matériel textile, bobinoir, galet, définition, dimension, désignation.
Descripteurs
Prix basé sur 4 pages
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 6177 a été élaborée par le comité technique ISO/TC 72,
Matériel pour l’industrie textile et matériel connexe.
Cette deuxième édition annule et remplace la première édition USO 6177-19831, dont le
paragraphe 3.2 a fait l’objet d’une révision technique.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
@ Organisation internationale de normalisation, 1986 l
Imprimé en Suisse
ISO 61774986 (FI
NORME INTERNATIONALE
Matériel pour l’industrie textile - Rouleaux magasins -
Terminologie et dimensions principales ’
1 Objet et domaine d’application 2 Références
La présente Norme internationale définit les termes de base et
fixe les principales dimensions et spécifications des rouleaux
ISO 109, Matériel pour lkdustrie textile - Largeurs de tissage
magasins utilisés pour l’enroulement des étoffes et pour I’ali-
des machines à tisser.
mentation des machines de finissage.
ISO 5241, Matériel pour Kindustrie textile - Ensouples de
NOTE - En supplément aux termes donnés dans les trois langues offi-
cielles de I’ISO (anglais, français, russe), la présente Norme internatio- tissage - Terminologie et dimensions de base.
nale donne des termes équivalents en allemand; ces termes ont été
inclus à la demande du comité technique ISO/TC 72, et sont publiés
ISO 811612, Mathriel pour l%ndustrie textile - Ensouples pour
sous la responsabilité des comités membres de l’Allemagne, R.F. (DIN)
enroulement - Paflie 2: Ensouples d’ourdissoirs - Termino-
et de la Suisse (SNV). Toutefois, seuls les termes donnés dans les lan-
gues officielles peuvent être considérés comme termes ISO.
logie et dimensions principales.
--------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...