ISO 13990-3:2006
(Main)Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables
Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables
ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.
Matériel pour l'industrie textile — Fournisseurs de fil et dispositifs de surveillance pour machines à tricoter — Partie 3: Dimensions des câbles de raccordement et des bandes de contact
L'ISO 13990-3:2006 spécifie les dimensions des câbles de raccordement multifilaires et des bandes de contact pour faible tension pour l'installation électrique des fournisseurs de fil et des dispositifs de surveillance conformément à l'ISO 13990-2.
General Information
- Status
- Published
- Publication Date
- 25-Jan-2006
- Current Stage
- 9599 - Withdrawal of International Standard
- Start Date
- 18-Nov-2024
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 06-Jun-2022
- Revises
ISO 13990:1996 - Textile machinery and accessories - Yarn feeders for knitting machines - Vocabulary - Effective Date
- 15-Apr-2008
Overview
ISO 13990-3:2006 - Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables - defines dimensional requirements for multi‑wire connecting cables and interconnection cables used in the low‑voltage electrical installations of yarn feeders and yarn control devices. The standard ensures mechanical fit, reliable electrical contact and interoperability between cables, cable conduits and contact strips on knitting machine accessories.
Key topics and requirements
- Scope: Applies to multi‑core, low‑voltage connecting and interconnection cables for yarn feeders and yarn control devices in knitting machines.
- Dimensional specifications: Provides precise external dimensions, core spacing and tolerances for connecting cables (two‑ to five‑core variants) to ensure correct seating in cable conduits and trouble‑free electrical contact.
- Interconnection cable geometry: Specifies interface dimensions between connecting cable surfaces and contact surfaces - including allowable distances and widths (examples in the standard: contact distance range 1.5–3 mm; mid‑contact reference 9.5 ± 0.5 mm; width limits for cable contact surface < 2.5 mm).
- Compatibility focus: Emphasizes repeatable mechanical fit and electrical connection in accordance with ISO 13990‑2 layout and connection points.
- Normative references: Read together with ISO 13990‑1 (vocabulary) and ISO 13990‑2 (connecting dimensions for devices).
Applications and practical value
- Machine manufacturers: Use ISO 13990‑3 when designing yarn feeders, yarn control modules and their electrical harnesses to guarantee plug‑and‑play compatibility across machine lines and suppliers.
- Cable and connector suppliers: Apply the dimensional tolerances to produce mating cables and contact strips that meet industry expectations for knitting machinery.
- Electrical and maintenance engineers: Reference the dimensions during installation, troubleshooting and replacement to reduce downtime and avoid misalignment or poor electrical contact.
- System integrators and safety teams: Rely on the standard to ensure low‑voltage wiring is mechanically compatible and minimizes risk of intermittent contacts or mechanical damage.
Practical benefits include improved interchangeability, reduced field modification, simplified procurement of spare cables and consistent electrical performance across knitting machine platforms.
Related standards
- ISO 13990‑1: Vocabulary - definitions used across the series
- ISO 13990‑2: Connecting dimensions for yarn feeders and yarn control devices - mating device dimensions that ISO 13990‑3 is intended to interface with
Keywords: ISO 13990-3:2006, yarn feeders, yarn control, knitting machines, connecting cable dimensions, interconnection cable, textile machinery, low voltage cable standards.
ISO 13990-3:2006 - Textile machinery and accessories -- Yarn feeders and yarn control for knitting machines
ISO 13990-3:2006 - Matériel pour l'industrie textile -- Fournisseurs de fil et dispositifs de surveillance pour machines a tricoter
Frequently Asked Questions
ISO 13990-3:2006 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables". This standard covers: ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.
ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.
ISO 13990-3:2006 is classified under the following ICS (International Classification for Standards) categories: 59.120.40 - Knitting machines. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 13990-3:2006 has the following relationships with other standards: It is inter standard links to ISO 15008:2017, ISO 13990:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 13990-3:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 13990-3
First edition
2006-01-15
Textile machinery and accessories —
Yarn feeders and yarn control for knitting
machines —
Part 3:
Dimensions for connecting and
interconnection cables
Matériel pour l'industrie textile — Fournisseurs de fil et dispositifs de
surveillance pour machines à tricoter —
Partie 3: Dimensions des câbles de raccordement et des bandes de
contact
Reference number
©
ISO 2006
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13990-3 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-
cleaning and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including
preparatory machinery
...
NORME ISO
INTERNATIONALE 13990-3
Première édition
2006-01-15
Matériel pour l'industrie textile —
Fournisseurs de fil et dispositifs
de surveillance pour machines à
tricoter —
Partie 3:
Dimensions des câbles de raccordement
et des bandes de contact
Textile machinery and accessories — Yarn feeders and yarn control for
knitting machines —
Part 3: Dimensions for connecting and interconnection cables
Numéro de référence
©
ISO 2006
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2006 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 13990-3 a été élaborée par le comité technique ISO/TC 72, Matériel pour l'industrie textile et machines
pour le nettoyage à sec et la blanchisserie industrielle, sous-comité SC 3, Matériel pour la fabricati
...














Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...