EN ISO 11111-5:2005/A1:2009
(Amendment)Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)
Textilmaschinen - Sicherheitsanforderungen - Teil 5: Vorbereitungsmaschinen für die Weberei und Wirkerei - Änderung 1 (ISO 11111-5:2005/Amd 1:2009)
Der Text von ISO 11111-5:2005/Amd.1:2009 wurde vom CEN als EN ISO 11111-5:2005/A1:2009 ohne
irgendeine Abänderung genehmigt
Matériel pour l'industrie textile - Exigences de sécurité - Partie 5: Machines de préparation au tissage et au tricotage - Amendement 1 (ISO 11111-5:2005/Amd 1:2009)
Tekstilni stroji - Varnostne zahteve - 5. del: Stroji za pripravo za tkanje in pletenje - Dopolnilo 1 (ISO 11111-5:2005/Amd 1:2009)
Amandma A1:2010 je dodatek k standardu SIST EN ISO 11111-5:2005
Ta del ISO 11111 je namenjen za uporabo skupaj z ISO 11111-1. Določa velike nevarnosti in ustrezne varnostne zahteve in/ali ukrepe za stroje za pripravo za tkanje in pletenje. Z upoštevanjem obsega ISO 11111-1 glede na ustreznost velja ta del ISO 11111 za vse stroje, obrate in s tem povezano opremo, namenjeno za izdelavo osnove, navijanje, umerjanje, določanje velikosti in shranjevanje osnove za navijanje, kot je določeno v Klavzuli 5.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11111-5:2005/oprA1:2008
01-november-2008
Tekstilni stroji - Varnostne zahteve - 5. del: Stroji za pripravo za tkanje in pletenje -
Dopolnilo 1 (ISO 11111-5:2005/DAM 1:2008)
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and
knitting - Amendment 1 (ISO 11111-5:2005/DAM 1:2008)
Textilmaschinen - Sicherheitsanforderungen - Teil 5: Vorbereitungsmaschinen für die
Weberei und Wirkerei - Änderung 1 (ISO 11111-5:2005/DAM 1:2008)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 5: Machines de
préparation au tissage et au tricotage - Amendement 1 (ISO 11111-5:2005/DAM 1:2008)
Ta slovenski standard je istoveten z: EN ISO 11111-5:2005/prA1
ICS:
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
59.120.40 Pletilni stroji Knitting machines
SIST EN ISO 11111-5:2005/oprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 11111-5:2005/oprA1:2008
SIST EN ISO 11111-5:2005/oprA1:2008
EUROPEAN STANDARD
DRAFT
EN ISO 11111-5:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2008
ICS 59.120.30; 59.120.40
English Version
Textile machinery - Safety requirements - Part 5: Preparatory
machinery to weaving and knitting - Amendment 1 (ISO 11111-
5:2005/DAM 1:2008)
Matériel pour l'industrie textile - Exigences de sécurité - Textilmaschinen - Sicherheitsanforderungen - Teil 5:
Partie 5: Machines de préparation au tissage et au Vorbereitungsmaschinen für die Weberei und Wirkerei -
tricotage - Amendement 1 (ISO 11111-5:2005/DAM 1:2008) Änderung 1 (ISO 11111-5:2005/DAM 1:2008)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.
This draft amendment A1, if approved, will modify the European Standard EN ISO 11111-5:2005. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-5:2005/prA1:2008: E
worldwide for CEN national Members.
SIST EN ISO 11111-5:2005/oprA1:2008
EN ISO 11111-5:2005/prA1:2008 (E)
Contents Page
Foreword.3
SIST EN ISO 11111-5:2005/oprA1:2008
EN ISO 11111-5:2005/prA1:2008 (E)
Foreword
This document (EN ISO 11111-5:2005/prA1:2008) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
Endorsement notice
The text of ISO 11111-5:2005/DAM 1:2008 has been approved by CEN as a EN ISO 11111-5:2005/prA1:2008
without any modification.
SIST EN ISO 11111-5:2005/oprA1:2008
SIST EN ISO 11111-5:2005/oprA1:2008
DRAFT AMENDMENT ISO 11111-5:2005/DAmd 1
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on: Voting terminates on:
2008-05-08 2008-10-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery — Safety requirements —
Part 5:
Preparatory machinery to weaving and knitting
AMENDMENT 1
Matériel pour l'industrie textile — Exigences de sécurité —
Partie 5: Machines de préparation au tissage et au tricotage
AMENDEMENT 1
ICS 59.120.30; 59.120.40
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008
SIST EN ISO 11111-5:2005/oprA1:2008
ISO 11111-5:2005/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii
...
SLOVENSKI STANDARD
01-marec-2010
Tekstilni stroji - Varnostne zahteve - 5. del: Stroji za pripravo za tkanje in pletenje -
Dopolnilo 1 (ISO 11111-5:2005/Amd 1:2009)
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and
knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)
Textilmaschinen - Sicherheitsanforderungen - Teil 5: Vorbereitungsmaschinen für die
Weberei und Wirkerei - Änderung 1 (ISO 11111-5:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 5: Machines de
préparation au tissage et au tricotage - Amendement 1 (ISO 11111-5:2005/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 11111-5:2005/A1:2009
ICS:
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
59.120.40 Pletilni stroji Knitting machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11111-5:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 59.120.30; 59.120.40
English Version
Textile machinery - Safety requirements - Part 5: Preparatory
machinery to weaving and knitting - Amendment 1 (ISO 11111-
5:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Textilmaschinen - Sicherheitsanforderungen - Teil 5:
Partie 5: Machines de préparation au tissage et au Vorbereitungsmaschinen für die Weberei und Wirkerei -
tricotage - Amendement 1 (ISO 11111-5:2005/Amd 1:2009) Änderung 1 (ISO 11111-5:2005/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 11111-5:2005; it was approved by CEN on 3 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-5:2005/A1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
This document (EN ISO 11111-5:2005/A1:2009) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11111-5:2005/Amd 1:2009 has been approved by CEN as a EN ISO 11111-5:2005/A1:2009
without any modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this International standard.
Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.