SIST EN ISO 9902-5:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilni stroji - Postopki za merjenje hrupa - 5. del: Pripravljalni stroji za tkanje in pletenje (ISO 9902-5:2001)Textilmaschinen - Geräuschmessverfahren - Teil 5: Vorbereitungsmaschinen für die Weberei und Kettenwirkerei (ISO 9902-5:2001)Matériel pour l'industrie textile - Code d'essai acoustique - Partie 5: Machines de préparation au tissage et au tricotage (ISO 9902-5:2001)Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)59.120.40Pletilni strojiKnitting machines59.120.30Statve. Tkalni strojiLooms. Weaving machines17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN ISO 9902-5:2001SIST EN ISO 9902-5:2002en01-november-2002SIST EN ISO 9902-5:2002SLOVENSKI
STANDARD



SIST EN ISO 9902-5:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 9902-5March 2001ICS 17.140.20; 59.120.01English versionTextile machinery - Noise test code - Part 5: Weaving andknitting preparatory machinery (ISO 9902-5:2001)Matériel pour l'industrie textile - Code d'essai acoustique -Partie 5: Machines de préparation au tissage et autricotage (ISO 9902-5:2001)Textilmaschinen - Geräuschmessverfahren - Teil 5:Vorbereitungsmaschinen für die Weberei undKettenwirkerei (ISO 9902--5:2001)This European Standard was approved by CEN on 15 March 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9902-5:2001 ESIST EN ISO 9902-5:2002



Page 2EN ISO 9902-5:2001ForewordThe text of the International Standard ISO 9902-5:2001 has been prepared by Technical Committee ISO/TC72 "Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration withTechnical Committee CEN/TC 214 "Textile machinery and machinery for dry-cleaning and industrial laundry",the secretariat of which is held by SNV.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by September 2001, and conflicting national standards shall bewithdrawn at the latest by September 2001.This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this standard.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 9902-5:2001 was approved by CEN as a European Standardwithout any modification.NOTE: Normative references to International Standards are listed in annex ZA (normative).Attention is drawn to the possibility that some of the elements of this International Standard may be thesubject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.This first edition of ISO 9902-5, together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4,ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised.ISO 9902 consists of the following parts, under the general title Textile machinery - Noise test code:- Part 1: Common requirements- Part 2: Spinning preparatory and spinning machinery- Part 3: Nonwoven machinery- Part 4: Yarn processing, cordage and rope manufacturing machinery- Part 5: Weaving and knitting preparatory machinery- Part 6: Fabric manufacturing machinery- Part 7: Dyeing and finishing machineryAnnex ZA of this part of ISO 9902 is for information only.SIST EN ISO 9902-5:2002



Page 3EN ISO 9902-5:2001Annex ZA(normative)Normative references to international publications with their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicated by (mod.), the relevantEN/HD applies.PublicationYearTitleENYearISO 37441994Acoustics
Determination of sound power levels ofnoise sources using sound pressure
Engineeringmethod in an essentially free field over a reflectingplaneEN ISO 37441995ISO 37461995Acoustics
Determination of sound power levels ofnoise sources using sound pressure
Survey me-thod using an enveloping measurement surface overa reflecting planeEN ISO 37461995ISO 37472000Acoustics
Determination of sound power levels ofnoise sources using sound pressure
Comparisonmethod for use in situEN ISO 37472000ISO 9614-11993Acoustics
Determination of sound power levels ofnoise sources using sound intensity
Part 1: Measu-rement at discrete pointsEN ISO 9614-11995ISO 9614-21996Acoustics
Determination of sound power levels ofnoise sources using sound intensity
Part 2: Measu-rement by scanningEN ISO 9614-21996ISO 112011995Acoustics
Noise emitted by machinery and equip-ment
Measurement of emission sound pressurelevels at a work station and at other specified posi-tions
Engineering method in an essentially free fieldover a reflecting planeEN ISO 112011995ISO 112021995Acoustics
Noise emitted by machinery and equip-ment
Measurement of emission sound pressurelevels at a work station and at other specified posi-tions
Survey method in situEN ISO 112021995ISO 112041995Acoustics
Noise emitted by machinery and equip-ment
Measurement of emission sound pressurelevels at a work station and at other specified posi-tions
Method requiring environmental correctionsEN ISO 112041995SIST EN ISO 9902-5:2002



Page 4EN ISO 9902-5:2001Annex ZB(informative)Clauses of this European Standard addressing Essential Requirements or other provisionsof EU DirectivesThis European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association and supports essential requirements of following EU directive(s).Machinery Directive 98/37/EC, amended by Directive 98/79/EC.WARNING: Other requirements and other EU Diectives may be applicable to the product(s) falling within thescope of this standard.Compliance with this standard provides one means of conforming with specific essential requirements of theDirective(s) concerned and associated EFTA regulations.SIST EN ISO 9902-5:2002



ReferencenumberISO9902-5:2001(E)©ISO2001INTERNATIONALSTANDARDISO9902-5Firstedition2001-03-15Textilemachinery—Noisetestcode—Part5:WeavingandknittingpreparatorymachineryMatérielpourl’industrietextile—Coded'essaiacoustique—Partie5:MachinesdepréparationautissageetautricotageSIST EN ISO 9902-5:2002



ISO9902-5:2001(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2001Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227490947E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO2001–AllrightsreservedSIST EN ISO 9902-5:2002



ISO9902-5:2001(E)©ISO2001–AllrightsreservediiiContentsPageForeword.iv1Scope.12Normativereferences.13Termsanddefinitions.24Definingthetestobject.25Soundpowerleveldetermination.26Emissionsoundpressureleveldetermination.
...