37.100.10 - Reproduction equipment
ICS 37.100.10 Details
Reproduction equipment
Reprogerate
Matériel de reproduction
Reprodukcijska oprema
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 37.100.10 - Reproduction equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- 1 (current)
- 2
- 3
- 4
- 5
This document specifies a method for measuring first print out time (FPOT) of digital printing devices. The document is applicable to digital printing devices and multifunctional devices, including black and white (B&W) and colour devices of any underlying marking technology. The document includes instructions for test charts, test setup procedure, test procedure and the reporting requirements for the digital printing measurements.
- Standard32 pagesEnglish languagesale 15% off
This document is limited to the evaluation of toner cartridge page yield for toner-containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for colour electrophotographic print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electrophotographic printer components. This document is only intended for the measurement of toner cartridge page yield when printing on plain paper using cyan, magenta, yellow and black toner cartridges. No other claims can be made from this testing regarding quality, reliability, etc. This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for photo-only printers. Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) implies some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document. NOTE 1 An all-in-one toner cartridge is a cartridge that includes at least: a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1). NOTE 2 This document will be used for the measurement of one of the contributions to cost per page (CPP). This document does not directly measure CPP, only the yield of the magenta, cyan, yellow and black toner cartridges. In most cases, these are not the only contributors to the CPP. It is beyond the scope of this document to provide a methodology for calculation of CPP.
- Standard19 pagesEnglish languagesale 15% off
This document is limited to the evaluation of toner cartridge page yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input-printing path, including multi-function devices that contain printer components. This document is only intended for the measurement of toner cartridge yield. No other claims may be made from this testing regarding quality, reliability, etc. This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for photo-only printers. Application of this document for yield measurement of toner replenishment systems (i.e. toner cartridge- and bottle-type systems where the toner reservoir is internal to the printing system and not user-replaceable) implies some procedural modifications specifically noted herein. This document is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this document. NOTE 1 An all-in-one toner cartridge is a cartridge that includes at least a toner containment part, a photoreceptor part and a developer part (see ISO/IEC 29142-1). NOTE 2 This document can be used for the measurement of one of the contributions to cost per page (CPP). This document does not directly measure CPP, only the yield of the toner cartridges. In most cases, these are not the only contributors to the CPP. It is beyond the scope of this document to provide a methodology for calculation of CPP.
- Standard24 pagesEnglish languagesale 15% off
IEC 62899-302-7:2025 provides measurement methods for inkjet printing dot placement evaluation for printed electronics.
NOTE: This document only describes the measurement methods, not the evaluation of the printing system.
- Standard29 pagesEnglish languagesale 15% off
IEC 62899-302-6:2025 specifies the method for determining inkjet first drop behaviour based on either visualized droplet images or printed dots on standard substrate. The exact behaviour that is referenced in this document is as follows: jetting speed variation according to the drop numbers, including non-jetting and low jetting speed. This measurement standardization is limited to drop-on-demand type of inkjet including piezo and thermal types and is not applicable to continuous inkjet. This document includes the test equipment, printing procedures, and analysis of drop behaviour. This document is limited to printed electronics application and is not suitable for graphic or other applications.
- Standard24 pagesEnglish languagesale 15% off
This document specifies test methods as well as test charts for measuring the physical durability attributes of duplex colour prints, typically used in office environment. This document is applicable to duplex prints comprising several sheets with colour images printed on both sides of a substrate. A multifunction or single function printer is used to form the duplex prints. This document is intended to be used to evaluate the durability of colour prints under environment and stress conditions assuming general office use, including transportation from the place of printing to where practically used. Permanence and durability in archival and storage environments are out of scope of this document and can be evaluated by the methods in ISO 11798. The physical durability attributes included are thermal and humidity blocking, water resistance, abrasion resistance and scratch resistance. All of these attributes are also applicable to a simplex print set comprising several sheets with colour images printed on one side of a substrate and no image on the other side.
- Standard14 pagesEnglish languagesale 15% off
IEC TR 62899-303-2:2024, which is a Technical Report, lays down the framework for defining standard mechanical dimensions of equipment utilized in the field of printed electronics. While primarily focused on substrate-based printing equipment, the guidelines and standards established in this document also maintain flexibility for application to transient printing equipment. Through this inclusivity, the document seeks to cover a broad spectrum of the industry, ensuring uniformity and adaptability across various printing technologies in the printed electronics domain.
- Technical report19 pagesEnglish languagesale 15% off
IEC 62899-302-4:2024 provides measurement methods and specifications for a medium to measure actual inkjet dot placement for printed electronics applications.
NOTE: For this document, a medium is a substrate with (a) certain functional layer(s) to facilitate the ink pinning process (or step). These functional layers are either (a) a liquid absorbing layer or (b) a hydrophilic or hydrophobic layer as shown in Figure 1.
- Standard14 pagesEnglish languagesale 15% off
This document provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices. This document is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.
- Standard18 pagesEnglish languagesale 15% off
This document defines a process independent measurement method for the evaluation of graininess of printed products. It provides requirements for the test form and measurement devices to be used as well as the formulas to compute the colour graininess score (SCG).
- Technical specification9 pagesEnglish languagesale 15% off
This document defines basic security requirements for the protection of hard copy devices (HCDs) including identification and authentication, security management, software update, field-replaceable nonvolatile storage data protection, network data protection and public switched telephone network (PSTN) fax-network separation. It can be applied to office equipment with network functions including printers, scanners, fax machines, digital copiers, and digital multi-function machines, specifically for small office and home office users. This document assumes a small, private information processing environment in which most elements of security are provided by the physical environment. In such an environment is assumed to be physically and logically protected from threats originating from outside of that environment, typically by limiting physical access to the HCD and connecting it to a LAN that is protected from the public Internet. A small office or home office would be a typical example of this environment. Please note that the requirements outlined in this document are not intended to replace the existing Common Criteria Certification for hardcopy devices which ensure the minimum-security requirements for enterprise environment. For example, aspects being required in Common Criteria Certification such as audit data generation, self-test capabilities, and protection of key material are not adequately addressed.
- Standard10 pagesEnglish languagesale 15% off
This document provides safety requirements specific to binding and finishing equipment and systems. It provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product.
This document is applicable to processes for preparing substrate for the printing process. It is also applicable to a wide range of equipment used in the binding and finishing process.
- Standard73 pagesEnglish languagesale 10% offe-Library read for1 day
This document describes four methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These four methods are generally identified as:
1) matching of tone value curves (TVI and CTV),
2) use of near-neutral scales,
3) colour-optimised correction curve set, and
4) use of CMYK to CMYK multi-dimensional transforms.
The procedures for establishing the aim condition for the necessary correction curves, the procedures for determining the individual correction curves, and a comparison of the applicability of these four methods are included.
These adjustment procedures are intended for use with printing systems that use CMYK colourants. Such systems are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing.
- Technical specification19 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification14 pagesEnglish languagesale 15% off
This document applies to processless lithographic plates and specifies evaluation methods for lithographic plate characteristics, on-press development performance, usability and print image quality.
It specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests.
The assessment of waterless lithographic plates is out of scope of this document.
NOTE Some of these methods can be used for the evaluation of all classes of lithographic plate.
This document specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests.
- Standard44 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard39 pagesEnglish languagesale 15% off
This document specifies test methods as well as test charts to measure the geometric property attributes and those variations in duplex colour prints typically used in office environment. This document is applicable to duplex prints comprising several sheets which are printed colour images on both surfaces of a substrate. “Within-page variation” and “sheet-to-sheet variation” are also applicable for a simplex print set comprising several sheets, which are printed colour images on one surface of a substrate and no image on the other surface. Prints with four primary colourants other than cyan, magenta, yellow and black are outside the scope of this document. Included are digital prints formed by using a multifunction or single function printer. When a duplex print set is evaluated, duplex printers which are capable to print images on both sides of substrate automatically are applicable, while simplex printers which require a manual arrangement of substrates between the front side and back side printing to form duplex prints are out of scope of this document. The printers of the maximum applicable substrate size of A4 or larger are suitable for the measurements. The geometric property attributes included are registration and magnification of a print set. Microscopic geometrical density variations, such as graininess, mottle and line raggedness, are outside the scope of this document. The sources of variations considered are locations in a page, print side in a sheet, print order of sheets in a print set, and variations among primary colours.
- Standard30 pagesEnglish languagesale 15% off
This document specifies test methods as well as test charts to measure the image quality attributes and those variations in colour prints typically used in office environment. Included are digital colour prints formed by using a multifunction or single function printer. Printers supporting a maximum paper size of A4 or larger are suitable for the measurements using the test charts defined in this document. The image quality attributes included are colour reproduction, line quality, graininess and mottle. The sources of variation considered are locations in a page (within-page variation), printed side in a sheet (side-to-side variation), printed order of the sheet (sheet-to-sheet variation) and colours printed on the back side of evaluated patch (show-through variation). A duplex print set, comprising several sheets which are printed by multifunction or single function printer with colour images on both surfaces of a substrate, is a main application of the test methods to measure image quality variations in the set. Variations, such as within-page variation and sheet-to-sheet variation, are also applicable for a simplex print set comprising several sheets which are printed colour images on one surface of a substrate and no image on the other surface. Both duplex and simplex printers are applicable to form a print set. When image qualities of duplex prints are measured, duplex printers which are capable to print images on both sides of substrate automatically are applicable to form duplex prints. However, simplex printers which require a manual arrangement of substrates between the front side and back side printing to form duplex prints are out of scope of this document.
- Standard23 pagesEnglish languagesale 15% off
This document deals with all significant hazards, hazardous situations or hazardous events relevant to converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see Clause 5), when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is applicable to converting equipment not covered by other parts of ISO 12643.
This document is not applicable to the machinery or machinery components manufactured before the date of its publication.
- Standard93 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides safety requirements specific to stand-alone platen presses.
This document provides additional safety requirements for the design and construction of manually-fed stand-alone platen presses, for single stroke mode, dwell mode, and continuous operation mode for cutting and creasing, embossing, foil stamping and/or printing of paper, board and other materials processed in a similar manner.
This document does not apply to presses designed to handle metal material other than foil.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides safety requirements specific to prepress and press equipment and systems.
This document provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
This document is not applicable to prepress and press equipment and systems manufactured before the date of its publication.
- Standard69 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems, corrugated board manufacturing systems and stand‑alone platen presses. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements given in this document are applicable to the equipment covered by ISO 12643 (all parts), unless otherwise noted. This document is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.
This document addresses recognized significant hazards specific to equipment and systems in the following areas:
— mechanical;
— electrical;
— slipping, tripping, falling;
— ergonomics;
— noise;
— UV and laser radiation;
— fire and explosion;
— thermal;
— substances and material used for processing;
— failure, malfunction of control system;
— other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].
This document is not applicable to:
— equipment manufactured before the date of its publication;
— ordinary office equipment for digital printing and paper processing, such as digital printers, copiers, sorters, binders and staplers, which is intended for use outside the printing and paper industry;
— winder-slitters and sheeters in paper finishing (sheeters with unwinders);
— office-type collating machines equipped with friction feeders;
— mail processing machines;
— machines used for filling packages (such as machines for shaping, filling, and closing the package); and
— textile printing presses.
The safety principles established in this document can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643 (all parts).
- Standard121 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the Contrast–Resolution test chart, the requirements on the printing process needed to reproduce this test chart, the required characteristics of a high resolution scanner needed to digitize the information reproduced on printed test charts, and the requirements on the interpretation of this digitized data. It also specifies the resolution-score method for evaluating the perceptual resolution of printed material using the Contrast–Resolution test chart. The procedure specified in this document is intended for a characterization of the perceived resolution of a graphic arts production printing system using the Contrast–Resolution test chart.
- Technical specification35 pagesEnglish languagesale 15% off
This document provides safety requirements specific to binding and finishing equipment and systems. It provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product.
This document is applicable to processes for preparing substrate for the printing process. It is also applicable to a wide range of equipment used in the binding and finishing process.
- Standard73 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides safety requirements specific to stand-alone platen presses.
This document provides additional safety requirements for the design and construction of manually-fed stand-alone platen presses, for single stroke mode, dwell mode, and continuous operation mode for cutting and creasing, embossing, foil stamping and/or printing of paper, board and other materials processed in a similar manner.
This document does not apply to presses designed to handle metal material other than foil.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document deals with all significant hazards, hazardous situations or hazardous events relevant to converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see Clause 5), when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is applicable to converting equipment not covered by other parts of ISO 12643.
This document is not applicable to the machinery or machinery components manufactured before the date of its publication.
- Standard93 pagesEnglish languagesale 10% offe-Library read for1 day
IEC TR 62899-304-1:2023, which is a technical report, provides technical information relating to surface temperature measurement of the substrate containing the printed patterns and films applicable to the photonic sintering system used in the printed electronics industry.
- Technical report16 pagesEnglish languagesale 15% off
This document applies to processless lithographic plates and specifies evaluation methods for lithographic plate characteristics, on-press development performance, usability and print image quality. It specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests. The assessment of waterless lithographic plates is out of scope of this document. NOTE Some of these methods can be used for the evaluation of all classes of lithographic plate. This document specifies measurement conditions for materials and equipment and provides guidelines for the selection of suitable processless lithographic plates by a printing organization and requirements for comparative assessment tests.
- Standard44 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard39 pagesEnglish languagesale 15% off
This document provides safety requirements specific to prepress and press equipment and systems. This document provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system. This document is not applicable to prepress and press equipment and systems manufactured before the date of its publication.
- Standard58 pagesEnglish languagesale 15% off
- Standard63 pagesFrench languagesale 15% off
This document provides safety requirements specific to stand-alone platen presses. This document provides additional safety requirements for the design and construction of manually-fed stand-alone platen presses, for single stroke mode, dwell mode, and continuous operation mode for cutting and creasing, embossing, foil stamping and/or printing of paper, board and other materials processed in a similar manner. This document does not apply to presses designed to handle metal material other than foil.
- Standard20 pagesEnglish languagesale 15% off
- Standard21 pagesFrench languagesale 15% off
This document deals with all significant hazards, hazardous situations or hazardous events relevant to converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see Clause 5), when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is applicable to converting equipment not covered by other parts of ISO 12643. This document is not applicable to the machinery or machinery components manufactured before the date of its publication.
- Standard80 pagesEnglish languagesale 15% off
- Standard81 pagesFrench languagesale 15% off
This document provides safety requirements specific to binding and finishing equipment and systems. It provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. This document is applicable to processes for preparing substrate for the printing process. It is also applicable to a wide range of equipment used in the binding and finishing process.
- Standard62 pagesEnglish languagesale 15% off
- Standard67 pagesFrench languagesale 15% off
This document provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems, corrugated board manufacturing systems and stand‑alone platen presses. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system. The requirements given in this document are applicable to the equipment covered by ISO 12643 (all parts), unless otherwise noted. This document is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment. This document addresses recognized significant hazards specific to equipment and systems in the following areas: — mechanical; — electrical; — slipping, tripping, falling; — ergonomics; — noise; — UV and laser radiation; — fire and explosion; — thermal; — substances and material used for processing; — failure, malfunction of control system; — other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.]. This document is not applicable to: — equipment manufactured before the date of its publication; — ordinary office equipment for digital printing and paper processing, such as digital printers, copiers, sorters, binders and staplers, which is intended for use outside the printing and paper industry; — winder-slitters and sheeters in paper finishing (sheeters with unwinders); — office-type collating machines equipped with friction feeders; — mail processing machines; — machines used for filling packages (such as machines for shaping, filling, and closing the package); and — textile printing presses. The safety principles established in this document can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643 (all parts).
- Standard110 pagesEnglish languagesale 15% off
- Standard121 pagesFrench languagesale 15% off
This document describes four methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These four methods are generally identified as: 1) matching of tone value curves (TVI and CTV), 2) use of near-neutral scales, 3) colour-optimised correction curve set, and 4) use of CMYK to CMYK multi-dimensional transforms. The procedures for establishing the aim condition for the necessary correction curves, the procedures for determining the individual correction curves, and a comparison of the applicability of these four methods are included. These adjustment procedures are intended for use with printing systems that use CMYK colourants. Such systems are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing.
- Technical specification19 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification14 pagesEnglish languagesale 15% off
The purpose of this document is to provide a method to determine the ink cartridge yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated print heads) for colour photo printing with colour inkjet printers and multifunction devices that contain inkjet printer components. In the case where a cartridge set can be used in multiple printer models, only one yield test is performed as long as the difference between printer models does not impact yield. NOTE A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In this case only one yield test is required as long as there are no differences in the cartridges other than market identifiers. This document prescribes the following: — the test method that manufacturers, test laboratories, etc. use to determine ink cartridge yield; — the method for determination of declared cartridge yield values for photo printing from the test results; and — the appropriate method of describing the cartridge yield for photo printing in documentation supplied to the consumer by the manufacturer. This document is only intended for the determination of ink cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc. This document can be used to determine the yield of any cartridge that is used during the printing of the photo test file defined in ISO/IEC 29103. This document is not for use with printers whose minimum printable size is equal to or greater than A3. This document is not intended to measure the yield of photo printing on paper size larger than 4" × 6", L or A6. In addition, this document is not for use with industrial printers or point of sale printers. It only applies to desktop printing systems.
- Standard28 pagesEnglish languagesale 15% off
IEC TR 62899-302-5:2023 provides the significant characteristics, parameters and system properties that are relevant for functional inkjet printing for printed electronics. Where possible, existing measurement standards and specifications are cited.
- Technical report15 pagesEnglish languagesale 15% off
This document defines a measurement method for the evaluation of distortions in the macroscopic uniformity of printed areas that are oriented in the horizontal and vertical direction, such as streaks and bands. It provides requirements for the layout of the test form, the use of a colour measurement device taking measurements in a 2D sampling grid, and the formula to compute the Macro-Uniformity-Score. This document does not cover any non-adjacent or non-horizontal nor vertical patterns. Due to the used spatial frequency, the Macro-Uniformity-Score does not measure high frequency (fine) patterns such as missing nozzles.
- Technical specification7 pagesEnglish languagesale 15% off
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes.
It is not applicable to other printing processes.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
This document specifies a method of automated colour profile distribution to large format inkjet printers. This document applies to digital colour printers and their printer controllers for which ICC colour management is necessary or desired. This document also applies to the print settings profile providers. The extent of automation covered includes the printer controller acquiring information about the overall situation, connecting to a print settings profile provider on the Internet, determining the best possible profile to download (if it exists), and downloading and installation of the profile. This document covers general concepts and procedures and does not go into a level of detail necessary to establish syntactic or semantic interoperability. This document covers ICC version 4 output profiles as specified by ISO 15076-1, but does not cover device link profiles.
- Standard8 pagesEnglish languagesale 15% off
This document defines procedures to measure and compare the colour gamuts of RGB and CMYK printing processes. It is not applicable to other printing processes.
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification21 pagesEnglish languagesale 10% offe-Library read for1 day
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
- Technical specification16 pagesEnglish languagesale 15% off
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 15% off
This document (all parts) specifies methods to determine chemical emission rates of analytes from ICT & CE equipment during intended operation in an Emission Test Chamber (ETC). This document (all parts) includes specific methods for equipment using consumables, such as printers, and equipment not using consumables, such as monitors and PC’s. Part 1 specifies the methods to determine the emission rates of VOC and carbonyl compounds, ozone, particulate matter, fine particles (FP) and ultra-fine particles (UFP) from electronic equipment using consumables. The methods comprise preparation, sampling (or monitoring) in a controlled ETC, storage and analysis, calculation and reporting of emission rates. Part 1 has two different methods for the determination of emission rates of VOC and carbonyl compounds. The two methods use two different emission models, the quasi-equilibrium model (QEM) and the constant emission model (CEM) respectively, to determine the emission rates of VOC and carbonyl compounds during the pre-operating phase. The quasi-equilibrium model method has been developed with hard copy devices for office or home use in mind whose energy-saving modes automatically activate during most intervals between operations. The calculation of emission rates during the pre-operating phase is based on the quasi-equilibrium assumption as shown in Annex C. The emission rates determined with this method can be used to compare equipment in the same class since test procedures are specified more narrowly than the other method (CEM). The constant emission model (CEM) has been developed for hard copy devices whose energy-saving modes have such a negligible effect on the determination of emission rates of VOC and carbonyl compounds that the generalised constant emission model shown in Annex D can be used for the determination of their emission rates during the pre-operating phase. This method presents more flexible test procedures than the QEM. Due to such features of this method, it may be used for hard copy devices whose idling mode usually lasts throughout intervals between operations, such as large hard copy devices used professionally. It may also be used for various equipment having different functions and structure for its intended use and the determination of carbonyl compounds requiring longer sampling duration due to a lack of sensitivity. Annex A specifies monochrome and colour print patterns for use in the operating phase of EUT using consumables. The operational readiness of AMS is confirmed according to Annex B. Predictions of “real indoor” concentrations from the determined emission rates are outside the scope of this document.
- Standard54 pagesEnglish languagesale 15% off
This document provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems, corrugated board manufacturing systems and stand‑alone platen presses. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements given in this document are applicable to the equipment covered by ISO 12643 (all parts), unless otherwise noted. This document is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.
This document addresses recognized significant hazards specific to equipment and systems in the following areas:
— mechanical;
— electrical;
— slipping, tripping, falling;
— ergonomics;
— noise;
— UV and laser radiation;
— fire and explosion;
— thermal;
— substances and material used for processing;
— failure, malfunction of control system;
— other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].
This document is not applicable to:
— equipment manufactured before the date of its publication;
— ordinary office equipment for digital printing and paper processing, such as digital printers, copiers, sorters, binders and staplers, which is intended for use outside the printing and paper industry;
— winder-slitters and sheeters in paper finishing (sheeters with unwinders);
— office-type collating machines equipped with friction feeders;
— mail processing machines;
— machines used for filling packages (such as machines for shaping, filling, and closing the package); and
— textile printing presses.
The safety principles established in this document can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643 (all parts).
- Standard121 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides safety requirements specific to prepress and press equipment and systems.
This document provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.
This document is not applicable to prepress and press equipment and systems manufactured before the date of its publication.
- Standard69 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes terms, symbols, notations and a framework for characterizing toner and ink cartridges used in printing devices that have a digital input printing path, including multi-function devices. This document is intended for equipment used in office environments. It primarily provides a foundation for measuring, evaluating, or specifying characteristics of such toner and ink cartridges. The terms, symbols, notations and framework established herein can be applied to such cartridges. The characterizations associated with the terms, symbols, notations, and framework established herein are specified throughout the ISO/IEC 29142 series.
- Standard30 pagesEnglish languagesale 15% off
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 15% off
This document specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. The document is applicable to digital copying devices and multifunctional devices. The document is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. This document includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This document is not intended to replace manufacturer's rated speeds.
- Standard31 pagesEnglish languagesale 15% off
This document specifies a method for measuring the digital printing productivity of digital printing devices with various office applications and print job characteristics. This document is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. This document includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. This document is not intended to be used for devices which are not able to print on a media size of A4/8,5” × 11” or for devices which are not able to collate multiple copies of a print. This document is not intended to replace manufacturer's rated speeds.
- Standard61 pagesEnglish languagesale 15% off
This document specifies a method for measuring the digital copying productivity of digital copying devices and multifunctional devices with various copying modes. It is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder (ADF) and collating function. This document is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. It allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc.) and various available digital image processing configurations. This document includes test files, test setup procedures, test procedures, and reporting requirements for digital copying productivity measurements. This document is not intended to be used for devices which are not able to copy on a media size of A4/8,5” × 11”, devices that do not have an ADF, or devices which are not able to collate multiple copies of original prints from a test set. This document is not intended to replace manufacturer's rated speeds.
- Standard40 pagesEnglish languagesale 15% off
This document specifies a method for determining scanning productivity by measuring "scanning speed", "scan to network folder speed" and "scan to PC speed". It includes test files, test setup procedure, test procedure and the reporting requirements for the scanning productivity measurements. This document is applicable to scanning devices including but not limited to multi-function devices, networked scanners and single-function scanners of any underlying scanning technology. This document is applicable to devices which are able to scan a media size of A4/8,5" × 11" and which have an automatic document feeder (ADF). It is also applicable to devices which have the ability to scan to network folder, or folder on PC and do not require, but can use, other application programs on a computer or another device to perform a scanning job. This document does not apply to testing and measurement of scan to USB, scan to local hard drive or other storage medium that is part of or plugged into the scanner. This document is not intended to be used for image quality measurement, document or record management of any scanned images.
- Standard32 pagesEnglish languagesale 15% off
- 1 (current)
- 2
- 3
- 4
- 5