SIST EN ISO 12643-2:2024
(Main)Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023)
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023)
This document provides safety requirements specific to prepress and press equipment and systems.
This document provides additional safety requirements for the design and construction of new prepress
and press equipment, and the auxiliary equipment integrated into the press control system.
This document is not applicable to prepress and press equipment and systems manufactured before the
date of its publication.
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik - Teil 2: Ausrüstungen und Systeme in der Druckvorstufe und im Druckbereich (ISO 12643-2:2023)
Dieses Dokument enthält spezifische Sicherheitsanforderungen für Ausrüstungen und Systeme in der Druck¬vorstufe und im Druckbereich. Dieses Dokument ist zur Verwendung in Verbindung mit ISO 12643-1:2021 vorgesehen.
Dieses Dokument enthält zusätzliche Sicherheitsanforderungen an die Konstruktion und den Bau von neuen Ausrüstungen in der Druckvorstufe und im Druckbereich und an die Zusatzeinrichtungen, die in Steuerungen von Druckmaschinen eingebaut sind.
Dieses Dokument gilt nicht für Ausrüstungen und Systeme in der Druckvorstufe und im Druckbereich, die vor dem Zeitpunkt seiner Veröffentlichung hergestellt wurden.
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 2: Systèmes et équipement pour la préimpression et la presse (ISO 12643-2:2023)
Le présent document décrit les exigences de sécurité applicables aux systèmes et équipements pour la préimpression et la presse.
Le présent document fournit des exigences de sécurité supplémentaires pour la conception et la construction de nouveaux équipements de préimpression et de presse, ainsi que des équipements auxiliaires intégrés dans le système de commande de presse.
Le présent document n'est pas applicable aux systèmes et équipements de préimpression et de presse qui ont été fabriqués avant sa date de publication.
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 2. del: Grafična priprava in tiskarska oprema ter sistemi (ISO 12643-2:2023)
Ta dokument podaja varnostne zahteve za opremo za grafično pripravo in tiskarsko opremo in sisteme.
Dokument podaja dodatne varnostne zahteve za načrtovanje in konstrukcijo nove opreme za grafično pripravo in tiskarske opreme ter pomožne opreme, ki je vgrajena v krmilni sistem tiskarske opreme.
Ta dokument se ne uporablja za opremo za grafično pripravo in tiskarsko opremo in sisteme, ki so izdelani pred datumom njegove objave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12643-2:2024
01-marec-2024
Nadomešča:
SIST EN 1010-2:2006+A1:2010
SIST ISO 12643-2:2014
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in
sisteme - 2. del: Grafična priprava in tiskarska oprema ter sistemi (ISO 12643-
2:2023)
Graphic technology - Safety requirements for graphic technology equipment and
systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023)
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der
graphischen Technik - Teil 2: Ausrüstungen und Systeme in der Druckvorstufe und im
Druckbereich (ISO 12643-2:2023)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 2: Systèmes et équipement pour la préimpression et la
presse (ISO 12643-2:2023)
Ta slovenski standard je istoveten z: EN ISO 12643-2:2023
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
SIST EN ISO 12643-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12643-2:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 12643-2:2024
EN ISO 12643-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 37.100.10 Supersedes EN 1010-2:2006+A1:2010
English Version
Graphic technology - Safety requirements for graphic
technology equipment and systems - Part 2: Prepress and
press equipment and systems (ISO 12643-2:2023)
Technologie graphique - Exigences de sécurité pour les Graphische Technik - Sicherheitsanforderungen an
systèmes et l'équipement de technologie graphique - Ausrüstungen und Systeme der graphischen Technik -
Partie 2: Systèmes et équipement pour la Teil 2: Ausrüstungen und Systeme in der
préimpression et la presse (ISO 12643-2:2023) Druckvorstufe und im Druckbereich (ISO 12643-
2:2023)
This European Standard was approved by CEN on 19 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12643-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12643-2:2024
EN ISO 12643-2:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12643-2:2024
EN ISO 12643-2:2023 (E)
European foreword
This document (EN ISO 12643-2:2023) has been prepared by Technical Committee ISO/TC 130
"Graphic technology" in collaboration with Technical Committee CEN/TC 198 “Printing and paper
machinery - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1010-2:2006+A1:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.