ISO/IEC 22592-2:2024
(Main)Office equipment — Print quality measurement methods for colour prints — Part 2: Registration and magnification accuracy
Office equipment — Print quality measurement methods for colour prints — Part 2: Registration and magnification accuracy
This document specifies test methods as well as test charts to measure the geometric property attributes and those variations in duplex colour prints typically used in office environment. This document is applicable to duplex prints comprising several sheets which are printed colour images on both surfaces of a substrate. “Within-page variation” and “sheet-to-sheet variation” are also applicable for a simplex print set comprising several sheets, which are printed colour images on one surface of a substrate and no image on the other surface. Prints with four primary colourants other than cyan, magenta, yellow and black are outside the scope of this document. Included are digital prints formed by using a multifunction or single function printer. When a duplex print set is evaluated, duplex printers which are capable to print images on both sides of substrate automatically are applicable, while simplex printers which require a manual arrangement of substrates between the front side and back side printing to form duplex prints are out of scope of this document. The printers of the maximum applicable substrate size of A4 or larger are suitable for the measurements. The geometric property attributes included are registration and magnification of a print set. Microscopic geometrical density variations, such as graininess, mottle and line raggedness, are outside the scope of this document. The sources of variations considered are locations in a page, print side in a sheet, print order of sheets in a print set, and variations among primary colours.
Titre manque — Partie 2: Titre manque
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 22592-2
First edition
Office equipment — Print quality
measurement methods for colour
prints —
Part 2:
Registration and magnification
accuracy
PROOF/ÉPREUVE
Reference number
ISO/IEC 22592-2:2023(E)
© ISO/IEC 2023
---------------------- Page: 1 ----------------------
ISO/IEC 22592-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 22592-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Print preparation procedures .3
4.1 Printing environment . 3
4.2 Printing materials . 3
4.3 Printer settings . 3
4.4 Printing operations . 4
4.5 Conditioning the prints after printing. 4
5 General requirements for measurements .4
5.1 Measurement environmental conditions . 4
5.2 Scanner conformance . 4
5.2.1 General . 4
5.2.2 Test chart for scanner conformance . 5
5.2.3 Scanning equipment . 6
5.2.4 Scanning procedures . 6
5.2.5 Magnification accuracy of scanner . 7
5.2.6 Local magnification deviation of scanner . 7
5.2.7
...
DRAFT INTERNATIONAL STANDARD
ISO/IEC DISPRF 22592-2
ISO/IEC JTC1 JTC 1/SC 28
Secretariat: JISC
Date: 2023-06-20-11-16
Office equipment — Print quality measurement methods for
colour prints — —
Part 2:
Registration and magnification accuracy
Proof stage
---------------------- Page: 1 ----------------------
ISO/IEC DISPRF 22592-2:20222023(E)
© ISO/IEC 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ii © ISO/IEC 2022 – All rights reserved
© ISO/IEC 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC DISPRF 22592-2:20222023(E)
Contents Page
Foreword . v
Introduction . vi
Part 2: Registration and magnification accuracy . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Print preparation procedures . 3
4.1 Printing environment . 3
4.2 Printing materials . 3
4.3 Printer settings . 4
4.4 Printing operations . 4
4.5 Conditioning the prints after printing . 4
5 General requirements for measurements. 5
5.1 Measurement environmental conditions . 5
5.2 Scanner conformance . 5
5.2.1 General . 5
5.2.2 Test chart for scanner conformance . 5
5.2.3 Scanning equipment . 9
5.2.4 Scanning procedures . 9
5.2.5 Magnification accuracy of scanner . 9
5.2.6 Local magnification deviation of scanner . 10
5.2.7 Goal values .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.