IEC 62889:2024 is available as IEC 62889:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62889:2024 describes two serial digital interfaces, Gigabit Video InterFace (GVIF) and Gigabit Video InterFace2 (GVIF2), for the interconnection of digital video equipment. GVIF and GVIF2 are primarily intended to carry high-speed digital video data for general usage and are well suited for multimedia entertainment systems in a vehicle. This document specifies the physical layer of the interface, including transmission line characteristics and electrical characteristics of transmitters and receivers. Mechanical and physical specifications of connectors are not included. IEC 62889:2024 cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Addition of a new technology interface, GVIF2.

  • Standard
    112 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English and French language
    sale 15% off

IEC TR 63447-2:2024 introduces use cases of multimedia services depending on form factors of smart mobile devices. It also includes use cases of multimedia applications with user interactions.

  • Technical report
    18 pages
    English language
    sale 15% off

IEC TR 63447-1:2023 introduces various form factors of smart mobile devices and their impact on multimedia services.
It does not deal with:
a) SMD performance to process multimedia services;
b) hardware performance and technology for each part, such as the battery, the antenna, the display, the main processor, various sensors;
c) the characteristics of the SMD's operating system (Android, iPhone OS etc.);
d) the generation characteristics of telecommunication and radio frequency (including wireless);
e) wearable devices, like smart watch, AR (augmented reality), VR (virtual reality) and so on.

  • Technical report
    17 pages
    English language
    sale 15% off

IEC TR 63478-1:2023 describes general considerations to be taken for measurement of a user’s quality of experience (QoE) on multimedia conferencing services.

  • Technical report
    20 pages
    English language
    sale 15% off

IEC TS 61966-13:2023 defines an objective colour difference metric and a measurement method for observer metamerism caused by displays with different spectral power distributions. This document also specifies the measuring equipment, conditions and methods that are necessary to obtain the metric. This document applies to light-emitting or backlit transmitting colour displays measured under dark-room conditions.

  • Technical specification
    49 pages
    English language
    sale 15% off

This document specifies measurement methods for the surround view system that is specified in IEC 63033-1.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies that is the multiple camera composite images generated by the surround view system of IEC 63033-1 is applied to the FOV and display requirement specified UN Regulation No. 46.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 63033 specifies recording methods of the surround view system that is specified in IEC 63033-1 in order to view the recorded video file with free eye point technology.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 63033 specifies the model for generating the surrounding visual image of the surround view system.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63207:2022 specifies measurement methods for optical performance (luminance) and blue light characteristics (BLCs) of visual display terminals (VDTs), excluding displays for outdoor use only.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63033-3:2019 specifies measurement methods for the drive monitoring system that is specified in IEC TS 63033-1:2017.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63207:2022 specifies measurement methods for optical performance (luminance) and blue light characteristics (BLCs) of visual display terminals (VDTs), excluding displays for outdoor use only.

  • Standard
    28 pages
    English and French language
    sale 15% off

This document specifies measurement methods for the surround view system that is specified in IEC 63033-1.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies that is the multiple camera composite images generated by the surround view system of IEC 63033-1 is applied to the FOV and display requirement specified UN Regulation No. 46.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63033-3:2022 is available as IEC 63033-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 63033-3:2022 specifies measurement methods for the surround view system specified in IEC 63033-1. IEC 63033-3:2022 cancels and replaces the first edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) updates to the text and the title to reflect the change of the scope of the IEC 63033 series.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English and French language
    sale 15% off

IEC 63033-4:2022 specifies which composite images generated from the multiple cameras of the surround view system specified in IEC 63033-1 comprise the FOV, and which display requirements specified in UN Regulation No. 46 apply.

  • Standard
    36 pages
    English and French language
    sale 15% off

IEC TR 63344:2021(E) describes the conceptual model of vibro-tactile-based haptics in multimedia systems and equipment used in electrical appliances, computer interfaces, automobiles, amusements, and communication devices. This model describes possible standardization items.

  • Technical report
    39 pages
    English language
    sale 15% off

IEC 62605:2021 specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers.
This document does not address the following aspects:
• data formats for reading devices;
• elements necessary for final print reproduction only;
• rendering issues related to physical devices;
• security issues such as DRM for documents.
IEC 62605:2021 cancels and replaces the second edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
The format described in Annex B was significantly enhanced in the following ways:
a) elements to enhance uses of data (e.g. web-related usage);
b) attribute for accessibility-related functions;
c) attributes for more detailed markup for data reusability.

  • Standard
    240 pages
    English language
    sale 15% off

IEC 63181-2:2020 specifies measuring methods for LCD multi-screen display terminals. To evaluate the characteristics of LCD multi-screen display terminals, the following measurement items are specified:
– gap (physical, optical): detailed splicing precision;
– splicing deviation: splicing accuracy of active areas of LCD splicing screen;
– installation deviation: the flatness of terminal surfaces in vertical and horizontal directions;
– luminance uniformity: luminance uniformity of adjacent LCD units;
– chromatic uniformity: chromatic uniformity of adjacent LCD units.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-10-13: BT D167/C020 to remove EMC and RED link and proceed with the project without link to legislation
2019-12-05: TC decision to carry on implementation as NON hEN - link EMC and RED removed
2019-12-03: NEXT ACTION: TC
2019:12-03: TC decided to set up AHG to look into aligning this AMD with EU regulatory requirements

  • Amendment
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TR 63289:2020 describes the cases of the multimedia cyber technology, including IoT or CPS, within the scope of TC 100, and possible standardization items.

  • Technical report
    25 pages
    English language
    sale 15% off

This document specifies measurement methods for the drive monitoring system that is
specified in IEC TS 63033-1:2017.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62943:2017 aims at establishing a unified standard concerning the lower communication layer common to multimedia applications, and does not deal with the upper communication layer which depends upon individual applications. This document specifies a unidirectional visible light communication protocol using visible light, named "visible light beacon system for multimedia applications".

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2019-10-29: D164/C050: Amendment to add Annex ZZ to EN 55032:2015 & enable citation in OJEU

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 63033-3:2019 specifies measurement methods for the drive monitoring system that is specified in IEC TS 63033-1:2017.

  • Standard
    32 pages
    English and French language
    sale 15% off

This part of IEC 63033 specifies recording methods of the drive monitoring system that is
specified in IEC TS 63033-1 in order to view the recorded video file with free eye point
technology.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62734:2014 provides specifications in accordance with the OSI Basic Reference Model, ISO/IEC 7498-1, (e.g., PhL, DL, etc.). It is intended to provide reliable and secure wireless operation for non-critical monitoring, alerting, supervisory control, open loop control, and closed loop control applications. It defines a protocol suite, including system management, gateway considerations, and security specifications, for low-data-rate wireless connectivity with fixed, portable, and slowly-moving devices, often operating under severe energy and power constraints. The application focus is the performance needs of process automation monitoring and control where end-to-end communication latencies on the order of at least 100 ms can be tolerated.

  • Standard
    1847 pages
    English and French language
    sale 15% off
  • Standard
    3668 pages
    English and French language
    sale 15% off

This document gives guidance on current practice for the characteristics of multimedia
analogue interfaces to achieve interoperability between equipment from different
manufacturers. It is not a performance standard.
Recommendations for interfaces for equipment used in vehicles, and for analogue video
interfaces for broadcast and similar equipment, are not given.
Refer to IEC 60958 for the interconnection of digital signals.
Figure 1 shows in a diagram the possible interfaces of the audio and video sources and
destinations.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62665:2015(E) this International Standard specifies: - a text encoding scheme to generate a texture map, - a physical shape and dimension of the texture map for printing, - additional features for texture map printing and - a texture map decoding and an auditory presentation of decoded texts. These specifications enable the interchange of documents and publications between visually impaired and non-impaired people. This second edition cancels and replaces the first edition published in 2012 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. Two different control codes are described by the different terms: "control codes for text" and "control codes for speech". Pack processing and LZSS processing are shown in their additional subclauses. An example of the header file "Speechio.h" is added. An example of error correction encoding is shown in additional Annex D.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62842:2015(E) specifies the method for allocating requested file space with no fragmentation, to minimize the need for reallocation of fragmented files in the Universal Disc Format (UDF) file system applied to hard disk drives used in hard disk recorders.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62889:2015(E) describes a serial digital interface, gigabit video interface (GVIF) for the interconnection of digital video equipment. The GVIF is primarily intended to carry high-speed digital video data for general usage and is well suited for multimedia entertainment systems in a vehicle. It specifies the physical layer of the interface including transmission line characteristics and electrical characteristics of transmitter and receiver. Mechanical and physical specifications of connectors are not included.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard aims at establishing a unified standard concerning the lower
communication layer common to multimedia applications, and does not deal with the upper
communication layer which depends upon individual applications.
This document specifies a unidirectional visible light communication protocol using visible
light, named "visible light beacon system for multimedia applications". This document does
not specify the type of receivers. Dimming can be done by such methods as pulse width
control or amplitude control, but the dimming is out of the scope of this document.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62448:2017 is also available as IEC 62448:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62448:2017 specifies a generic format for multimedia e-publishing employed for e-book data interchange among data preparers and publishers, satisfying a number of publishers’ requirements: revisable, extensible and heterogeneous logical structure. This fourth edition cancels and replaces the third edition, published in 2013 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) clarifying descriptions;
b) deleting redundant statements;
c) resolving mistakes and confusing terminologies.

  • Standard
    351 pages
    English language
    sale 15% off
  • Standard
    705 pages
    English language
    sale 15% off

IEC 62608-2:2017 specifies the operational model for home network configuration. In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is no manager in the home network. Thus, a standardized network management procedure is required for suitable network operation. This document specifies the management procedure as sequences. The sequences are typical procedures of management. This document also describes implementation requirements, and the protocols between each component.

  • Standard
    17 pages
    English language
    sale 15% off

IEC TR 63094:2017(E) specifies the line code 4b/10b for dependable multimedia signal transmission required for complex machines, such as robots and automobiles. This document corresponds to the functions specified in layer 1 to layer 2 of the OSI reference model (ISO/IEC 7498).
The purpose of this document is to facilitate the development and use of the 4b/10b in dependable systems by providing a line code protocol. This document provides a line code protocol for interconnections among distributed real-time systems, including embedded systems, control systems, amusement systems, robot systems, and intelligent buildings. The 4b/10b can achieve the line code with ECC (error code correction).

  • Technical report
    17 pages
    English language
    sale 15% off

This International Standard specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers.
This International Standard does not address the following aspects:
• data formats for reading devices;
• elements necessary for final print reproduction only;
• rendering issues related to physical devices;

  • Standard
    237 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62608-1:2014 specifies the basic reference model to configure devices connected to a home network with a configuration framework for network applications running on such devices and describes the system model and functions that each component should support. It applies to devices that are connected via cables and switched on and that support the IP protocol. The reference model covers inside and outside network connectivity.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62943:2017 aims at establishing a unified standard concerning the lower communication layer common to multimedia applications, and does not deal with the upper communication layer which depends upon individual applications. This document specifies a unidirectional visible light communication protocol using visible light, named "visible light beacon system for multimedia applications".

  • Standard
    45 pages
    English and French language
    sale 15% off

This part of IEC 61937 specifies the method for IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the MPEG-2 AAC (Advanced Audio Coding) and MPEG-4 AAC formats.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

In order to generate a texture map for auditory presentation of printed text information, this
International Standard specifies
– a text encoding scheme to generate a texture map,
– a physical shape and dimension of the texture map for printing,
– additional features for texture map printing,
– texture map decoding and an auditory presentation of decoded texts.
These specifications enable the interchange of documents and publications between visually
impaired and non-impaired people.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC TR 63038:2016(E) specifies the conceptual model of multimedia systems and equipment utilized for cars and describes possible standardization items.

  • Technical report
    26 pages
    English language
    sale 15% off

IEC 62698:2013 defines the common semantics and core elements on rights information interoperability for IPTV systems/equipment that is subject to multimedia content to be used across different platforms legally. The rights information includes rights and security related metadata that is described in ITU-T Recommendation H.750.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies the method for allocating requested file space with no
fragmentation, to minimize the need for reallocation of fragmented files in the Universal Disc
Format (UDF) file system applied to hard disk drives used in hard disk recorders.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62605:2016 specifies the interchange format for e-dictionaries among publishers, content creators and manufacturers. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Ref element is added to facilitate cross reference between entries.
- A new version of LeXML format, which is one of the base formats of the first edition, has been expanded and becomes Annex B. (The existing format becomes Annex A.)

  • Standard
    234 pages
    English language
    sale 15% off
  • Standard
    473 pages
    English and French language
    sale 15% off

2012-12-11: Publication editing allocated to cpalagi@cencenelec.eu

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day