iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

43.060.50 - Electrical and electronic equipment. Control systems

ICS 43.060.50 Details

Electrical and electronic equipment. Control systems

Elektrische Anlage. Steuerungssysteme

Équipement électrique et électronique. Systemes de commande

Električna in elektronska oprema. Krmilni sistemi

General Information

Parent
43.060 - Internal combustion engines for road vehicles
Standardization Organization
Technical Committee
Directive
Mandate
50
ISO
ISO 11565:2024(Main)
Road vehicles — Spark-plugs — Test methods and requirements

This document specifies the test methods and requirements for the mechanical and electrical performance of spark-plugs for use with spark ignition engines.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 28741:2023(Main)
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions

This document specifies the main properties and dimensions of spark plugs, including the terminals and the dimensions of their cylinder head housings, for use with any spark-ignited engines. The usage of spark plugs is not restricted to road vehicles only. This document does not cover screened and waterproof spark plugs (see ISO 3412, ISO 3895 and ISO 3896).

  • Standard
    24 pages
    English language
    sale 15% off
ISO
ISO 17447-1:2022(Main)
Road Vehicles — Glow plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow plugs

This document specifies the main properties and dimensions of metal-sheath-type glow plugs, including the terminals, and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 24195:2022(Main)
Road vehicles — Vocabulary and characteristics for engineering of starting devices

This document includes common definitions for terms and their interdependencies related to starting devices as well as describes their general and specific characteristics.

  • Standard
    10 pages
    English language
    sale 15% off
IEC
IEC 61588:2021(Main)
Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

IEC 61588:2021 defines a network protocol, the Precision Time Protocol (PTP), enabling accurate and precise synchronization of the real-time clocks of devices in networked distributed systems. The protocol is applicable to systems where devices communicate via networks, including Ethernet. The standard allows multicast communication, unicast communication or both. The standard specifies requirements for mapping the protocol to specific network implementations and defines such mappings, including User Datagram Protocol (UDP)/Internet Protocol (IP versions 4 and 6), and layer-2 IEEE 802.3 Ethernet.

  • Standard
    499 pages
    English language
    sale 15% off
SIST
SIST EN IEC 63033-3:2020(Main)
Car multimedia systems and equipment - Drive monitoring system - Part 3: Measurement methods (IEC 63033-3:2019)
EN IEC 63033-3:2019

This document specifies measurement methods for the drive monitoring system that is
specified in IEC TS 63033-1:2017.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 21956:2019(Main)
Road vehicles — Ergonomics aspects of transport information and control systems — Human machine interface specifications for keyless ignition systems

This document provides human machine interface (HMI) design specifications for keyless ignition systems that use key code carrying device for passenger cars (including sport utility vehicles and light trucks) and commercial vehicles (including heavy trucks and buses), independent of vehicle propulsion system. HMI specifications for the electrical key functions include actuation in normal conditions, emergencies, low battery, and avoidance of inadvertent actuations, alerts and specific non-standard situations.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
SIST
SIST EN IEC 63033-2:2019(Main)
Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring system (IEC 63033-2:2018)
EN IEC 63033-2:2019

This part of IEC 63033 specifies recording methods of the drive monitoring system that is
specified in IEC TS 63033-1 in order to view the recorded video file with free eye point
technology.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 22565:2019(Main)
Road vehicles — Durability test method of starter relay for stop and start system

This document defines the durability test methods of a starter relay for passenger vehicles (12 V) with a stop and start system. It uses a simulated electrical load to represent the starter solenoid.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 20574:2019(Main)
Road vehicles — Durability test method for starter motor for stop and start system

This document defines requirements and recommendations for starter motor durability testing of 12 V start systems for internal combustion engines. This includes test methods, test procedures and capabilities of test benches.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
ISO
ISO 17447-2:2015(Main)
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs

ISO 17447-2:2015 specifies the main properties and dimensions of ceramic-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 17447-3:2015(Main)
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements

ISO 17447-3:2015 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to glow-plugs conforming to ISO 17447‑1 and ISO 17447‑2, used in diesel (compression ignition) engines.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 8856:2014(Main)
Road vehicles — Electrical performance of starter motors — Test methods and general requirements

ISO 8856:2014 lays down test methods and general requirements for the determination of the electrical characteristics of DC starter motors intended to start internal combustion engines of road vehicles.

  • Standard
    11 pages
    English language
    sale 15% off
IEC
IEC TR 62343-6-2:2013(Main)
Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results

IEC/TR 62343-6-2:2013(E) clarifies dynamic module interfaces, which should be standardized, based on the surveys. Annex A is a summary of survey responses by region and Annex B provides survey results specific to the optical channel monitor (OCM). The object of this technical report is to propose a software and hardware interface standard of dynamic modules. The dynamic modules addressed are defined in the IEC 62343 series. This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the survey results of the software and hardware interface of OCM have been added as Annex B, which was presented at the IEC Seattle meeting in 2010. The results are in agreement with the general conclusion of the first edition;
- OPMON (optical performance monitor) in the body of the text has been changed to OCM (optical channel monitor) for consistency with the latest definitions. Keywords: software and hardware interface standard of dynamic modules

  • Technical report
    15 pages
    English language
    sale 15% off
ISO
ISO 8854:2012(Main)
Road vehicles — Alternators with regulators — Test methods and general requirements

ISO 8854:2012 specifies test methods and general requirements for the determination of the electrical characteristic data of alternators for road vehicles. It applies to alternators, cooled according to the supplier's instructions, mounted on internal combustion engines.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    English language
    sale 15% off
IEC
IEC TR 62343-6-2:2009(Main)
Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results

IEC/TR 62343-6-2:2009(E) clarifies dynamic module interfaces which should be standardized based on a survey of manufacturers. The objectives of this technical report are to present the survey results and to propose software (SW) and hardware (HW) interface standards of dynamic modules.

  • Technical report
    12 pages
    English language
    sale 15% off
ISO
ISO 6856:2005(Main)
Road vehicles — Unscreened high-voltage ignition cable assemblies — Test methods and general requirements

ISO 6856:2005 specifies test methods and general requirements for unscreened high-voltage ignition cable assemblies, and is applicable to all such assemblies used in road vehicle applications.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 3808:2002(Main)
Road vehicles — Unscreened high-voltage ignition cables — General specifications, test methods and requirements

ISO 3808 specifies the classes, types and dimensions of, and test methods and requirements for, the unscreened high-voltage ignition cables used in spark-ignited engines for road vehicles.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
ISO
ISO 11748-3:2002(Main)
Road vehicles — Technical documentation of electrical and electronic systems — Part 3: Application example

This part of ISO 11748 provides an application example of the guidelines and specifications for technical documentation given in ISO 11748-1 and ISO 11748-2. The example is based on the standard generalized markup language (SGML), which is specified in ISO 8879.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 6518-1:2002(Main)
Road vehicles — Ignition systems — Part 1: Vocabulary
  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO/TR 15409:2002(Main)
Road vehicles — Heat rating of spark plugs

This Technical Report describes the heat-rating methods of spark-plugs used with spark-ignition engines.

  • Technical report
    89 pages
    English language
    sale 15% off
  • Technical report
    89 pages
    French language
    sale 15% off
ISO
ISO 7650:1987/Amd 1:2001(Amendment)
Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4 — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 11748-1:2001(Main)
Road vehicles — Technical documentation of electrical and electronic systems — Part 1: Content of exchanged documents

This part of ISO 11748 gives guidelines for the content and structure of technical documentation for on-board electronic control systems used in road vehicles. It provides a checklist of technical data elements to be considered when creating technical documentation. The actual set of technical data elements to be exchanged between project partners is settled by the documentation agreement described in ISO 11748-2. Any decision on which information is relevant, mandatory or optional will be specific to a given project, and will thus be documented in that agreement.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 11748-2:2001(Main)
Road vehicles — Technical documentation of electrical and electronic systems — Part 2: Documentation agreement

This part of ISO 11748 gives guidelines for the structure and content of the documentation agreement established between partners in the development of on-board electronic control systems used in road vehicles. The documentation agreement describes the exchange of documents between the partners and is specific to a given development. This part of ISO 11748 provides a framework for any such agreement.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
ISO
ISO 13476:1997(Main)
Road vehicles — Ignition coils — Electrical characteristics and test methods
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 3553-2:1997(Main)
Road vehicles — High-tension connectors for ignition coils and distributors — Part 2: Plug-types
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 6518-2:1995(Main)
Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods

Cancels and replaces the first edition (1982). Lays down the methods and test conditions for testing battery-supplied ignition systems for spark-ignited internal combustion engines. Gives two methods of obtaining the results necessary for calculating the system output energy.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 9457-2:1994(Main)
Road vehicles — Metric starter motor pinions — Part 2: Pinions with 20 degree pressure angle

Specifies the metric modules, number of teeth and other tooth characteristics which are necessary to ensure interchangeability of starter motor pinions with a pressure angle of 20°, used on starter motors for reciprocating internal combustion engines for road vehicles.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 3412:1992(Main)
Road vehicles — Screened and waterproof spark-plugs and their connections — Types 1A and 1B

Specifies the essential dimensional characteristics of a spark-plug type used with spark ignition engines. Tabulates major, pitch, and minor diameters for plug thread and connector thread. A figure illustrates shapes and reference quantities of concern.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 10455:1992(Main)
Road vehicles — Dry ignition coils using rotating high-voltage distributor

Specifies the dimensions, shape and connections for coils with two fixing holes, four fixing and/or positioning holes, and with mounting brackets. Applies to ignition systems for spark-ignited internal combustion engines of road vehicles.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 4024:1992(Main)
Road vehicles — Ignition coils — Low-tension cable connections

Specifies the dimensions. Applies to ignition systems for spark-ignited internal combustion engines of road vehicles.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
ISO
ISO 8123:1991(Main)
Road vehicles — Diametral pitch starter motor pinions

Specifies the diametral pitches, pressure angles, number of teeth and other tooth characteristics which are necessary to ensure interchangeability of pinions used for starter motors mounted on reciprocating internal combustion engines for road vehicles.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 7651:1991(Main)
Commercial vehicles and buses — Mounting dimensions for alternators of types 1, 2 and 3

Specifies the mounting dimensions necessary for interchangeability of hinge-mounted alternators. May be used for other engine applications where no specific standards exist.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 9457-1:1991(Main)
Road vehicles — Metric starter motor pinions — Part 1: Currently used pinions

Specifies the metric modules, pressure angles, number of teeth and other tooth characteristics which are necessary to ensure interchangeability of pinions used for starter motors mounted on reciprocating internal combustion engines for road vehicles.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 9534:1989(Main)
Road vehicles — Fuel pump electric connections

Specifies the requirements for electric connections for electric fuel pumps. Does not apply to electric fuel pumps with free couplers, i.e. cable to cable terminations. Gives details for the types A, B and C. Some figures illustrate the meaning of the description. Details not specified are left to the manufacturer's discretion.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
ISO
ISO 3553-1:1987(Main)
Road vehicles — High-tension connections for ignition coils and distributors — Part 1: Socket-type

This part specifies the essential dimensions of socket-type connections, used for spark-ignition engines. Applies to high-tension sockets and cable connectors of type "A" (figures 1 and 2). An annex gives socket and connector type "B" (figures 3 and 4). This first edition cancels and replaces the ISO 3553:1975.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 7650:1987(Main)
Commercial vehicles and buses — Mounting dimensions for starter motors of types 1, 2, 3 and 4

Establishes the mounting dimensions for interchangeability of starter motors mounted on internal combustion engines. Applies to starter motors, types 1 to 4, sizes "A" and "B". May be used for other engine applications where no specific standards exist. Some figures illustrate shapes and reference quantities of concern.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 3896:1986(Main)
Road vehicles — Screened and waterproof spark-plug and its connection — Type 3

Specifies the essential dimensional characteristics of a spark-plug type used with spark ignition engines. Tabulates major, pitch, and minor diameters for plug thread and connector thread. A figure illustrates shapes and reference quantities of concern. This third edition cancels and replaces the second edition (1979).

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 3895:1986(Main)
Road vehicles — Screened and waterproof spark-plug and its connection — Type 2

Specifies the essential dimensional characteristics of a spark-plug type used with spark ignition engines. Tabulates major, pitch, and minor diameters for plug thread and connector thread. A figure illustrates shapes and reference quantities of concern. This third edition cancels and replaces the second edition (1979).

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 6518-2(Main)
Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods

Cancels and replaces the first edition (1982). Lays down the methods and test conditions for testing battery-supplied ignition systems for spark-ignited internal combustion engines. Gives two methods of obtaining the results necessary for calculating the system output energy.

  • Draft
    19 pages
    English language
    sale 15% off
ISO
ISO 17447-1:2015(Main)
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs

ISO 17447-1:2015 specifies the main properties and dimensions of metal-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 6550-4:2014(Main)
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs

ISO 6550-4:2014 specifies the main characteristics of M8 × 1 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 28741:2013(Main)
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions

ISO 28741:2013 specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines. ISO 28741:2013 does not cover screened and waterproof spark-plugs.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 6550-3:2013(Main)
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs

ISO 6550-3:2013 specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines. :

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 28741:2009/Cor 1:2009(Corrigendum)
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions — Technical Corrigendum 1
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 6550-4:2009(Main)
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs

ISO 6550-4:2009 specifies the main characteristics of M8 x 1 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 28741:2009(Main)
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions

ISO 28741:2009 specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines. ISO 28741:2009 does not cover screened and waterproof spark-plugs.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
ISO
ISO 6550-3:2009(Main)
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs

ISO 6550-3:2009 specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 7578:2008(Main)
Road vehicles — Sheath-type glow-plugs — General requirements and test methods

ISO 7578:2008 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to those sheath-type glow-plugs conforming to ISO 6550‑1, ISO 6550‑2, ISO 6550‑3 and ISO 6550‑4, used in compression ignition (diesel) engines.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 11565:2006/Cor 1:2007(Corrigendum)
Road vehicles — Spark-plugs — Test methods and requirements — Technical Corrigendum 1
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
50