IEC 62734:2014/AMD1:2019

IEC 62734 ®
Edition 1.0 2019-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Industrial networks –
Wireless communication network and communication profiles – ISA 100.11a

Réseaux industriels –
Réseau de communication sans fil et profils de communication – ISA 100.11a

IEC 62734:2014-10/AMD1:2019-07(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 62734 ®
Edition 1.0 2019-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Industrial networks –
Wireless communication network and communication profiles – ISA 100.11a

Réseaux industriels –
Réseau de communication sans fil et profils de communication – ISA 100.11a

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.60; 33.170 ISBN 978-2-8322-7149-0

– 2 – IEC 62734:2014/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by subcommittee 65C: Industrial networks, of IEC
technical committee 65: Industrial-process measurement, control and automation.
The text of this amendment is based on the following documents:
FDIS Report on voting
65C/965/FDIS 65C/970/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
GENERAL REPLACEMENTS
Throughout the document, replace references to IEEE 802.15.4:2011 as follows.
Location Replace With
4.6.10.2.8 “IEEE 802.15.4:2011” “IEEE 802.15.4”
th
“IEEE 802.15.4e” “IEEE 802.15.4”
6.3.5.2, 6 dash
st
“IEEE 802.15.4:2011, 7.4.1” “IEEE 802.15.4-2015, 9.4.1”
7.3.1.2, 1 paragraph
th
“IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.1.2, 4 paragraph
st
“IEEE 802.15.4:2011, 7.4.3” “IEEE 802.15.4-2015, 9.4.3”
7.3.2.3.2, 1 paragraph
st
“IEEE 802.15.4:2011, 7.3.2” “IEEE 802.15.4-2015, 9.3.2.1”
7.3.2.4.10, 1 bullet
7.3.2.5, step i), (4 times) “IEEE 802.15.4:2011, 7.3.4” “IEEE 802.15.4-2015, 9.3.4”
7.3.2.5, step i)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.2.6, step f), (4 times) “IEEE 802.15.4:2011, 7.3.5” “IEEE 802.15.4-2015, 9.3.5”
7.3.2.6, step f)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.2.6, step f)1) “IEEE 802.15.4:2011, 5.2.2.2.2” “IEEE 802.15.4-2015, 7.3.2.2
7.3.2.6, step f)2) “IEEE 802.15.4:2011, Table 57” “IEEE 802.15.4-2015, Table 9-5”
7.3.3.8, step i), (4 times) “IEEE 802.15.4:2011, 7.3.4” “IEEE 802.15.4-2015, 9.3.4”
7.3.3.8, step i)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.3.9, step g), (4 times) “IEEE 802.15.4:2011, 7.3.5” “IEEE 802.15.4-2015, 9.3.5”

© IEC 2019
Location Replace With
7.3.3.9, step g)1) “IEEE 802.15.4:2011, Table 58” “IEEE 802.15.4-2015, Table 9-6”
7.3.3.9, step g)1) “IEEE 802.15.4:2011, 5.2.2.2.2” “IEEE 802.15.4-2015, 7.3.2.2
7.3.3.9, step g)2) “IEEE 802.15.4:2011, Table 57” “IEEE 802.15.4-2015, Table 9-5”
rd
“IEEE 802.15.4:2011, 8.1.5” “IEEE 802.15.4-2015, 10.1.5”
8.2.2.5, 3 paragraph
st
“IEEE 802.15.4:2011, Table 66” “IEEE 802.15.4-2015, Table 10-4”
8.2.3.2, 1 paragraph
9.3.2.1, NOTE “IEEE 802.15.4:2011” “IEEE 802.15.4-2015”
th
“IEEE 802.15.4:2011” “IEEE 802.15.4”
9.3.2.1, 5 paragraph
st
“IEEE 802.15.4:2011, 5.2.2.2” “IEEE 802.15.4-2015, 7.3.2”
9.3.3.1, 1 paragraph
st
“IEEE 802.15.4:2011, 5.2.1 and
“IEEE 802.15.4-2015, 7.2 and 7.3.2”
9.3.3.1, 1 paragraph
5.2.2.2”
nd
“IEEE 802.15.4:2011, 5.2.1.2” “IEEE 802.15.4-2015, 7.2.2”
9.3.3.1, 2 paragraph
rd
“IEEE 802.15.4:2011, 5.2.3” “IEEE 802.15.4-2015, 7.3.3”
9.3.3.1, 3 paragraph
rd
“IEEE 802.15.4:2011, 5.2.1.1.8” “IEEE 802.15.4-2015, 7.2.1.10”
9.3.3.1, 3 paragraph
st
“IEEE 802.15.4:2011, 5.2.1” “IEEE 802.15.4-2015, 7.2”
9.3.3.2, 1 paragraph
st
“IEEE 802.15.4:2011, Figure 35” “IEEE 802.15.4-2015, Figure 7-1”
9.3.3.2, 1 paragraph
9.3.3.2, field a) “IEEE 802.15.4:2011, 5.2.1.1” “IEEE 802.15.4-2015, 7.2.1”
rd
“IEEE 802.15.4:2011, Annex B” “IEEE 802.15.4-2015, Annex B”
11.3.2, 3 paragraph
13.11.2.6, d) “IEEE 802.15.4:2011” “IEEE 802.15.4”
rd
“IEEE 802.15.4:2011” “IEEE 802.15.4-2015”
Table B.5, 3 column header
st
“IEEE 802.15.4:2011, B.3.2” “IEEE 802.15.4-2015, B.3.2”
H.1.4, 1 paragraph
OTHER REPLACEMENTS
0.3 Potentially relevant patents
In cell d) of the table providing coordinates for the Yokogawa Electric Corporation patent
holder, replace “Musashina-shi” with “Musashino-shi”.
2 Normative references
™ ™ 2
Replace reference to IEEE 802.15.4 :2011 with “IEEE Std 802.15.4 -2015 , IEEE Standard
for Low-Rate Wireless Networks”.
4.6.11.1 Overview
Replace the existing NOTE 3 with the following note:
NOTE 3 IEEE 802.15.4 specifies channel hopping and TSCH mechanisms that are similar to, but not identical to,
many of the DL mechanisms specified in this document.
Table 7 – ARMO attributes
th
For attribute 2, 4 column, add “Valid range: –4 to 32 767”.
Table 10 – DMO attributes
th
For attribute 8, 4 column, add “Default value: null string (length zero)”.
th
For attribute 27, 4 column, replace “Default value: 30 s” with “Default value: 248 s”.

– 4 – IEC 62734:2014/AMD1:2019
© IEC 2019
th
For attribute 29, 4 column, replace “Default value: 30 s” with “Default value: 62 s”.
Table 19 – Proxy_System_Manager_Join method
Add Input Argument 11 as follows:
11 Consortium_Info Type: Unsigned8 Provides Consortium-specific information
from the joining device that is not specified
by this document
Replace existing Output Arguments 7 and 8 with the following text:
7 Assigned_Max_TSDU_Size Type: Indicates the maximum TSDU supported in
Unsigned16 octets which can be converted by the
source into max APDU size by taking into
account the TL, security, AL headers and
TMIC sizes
8 MIC Type: This value is used for protecting argument
OctetString4 1 through 7 with Join key. This MIC value
is generated by the Security Manager. The
Advertisement router shall not overwrite
this value. See 7.4.4.3.3.2
Table 23 – System_Manager_Join method
Add Input Argument 11 as follows:
11 Consortium_Info Type: Provides Consortium-specific information
Unsigned8 from the joining device that is not specified
by this document
Replace existing Output Arguments 7 and 8 with the following text:
7 Assigned_Max_TSDU_Size Type: Indicates the maximum TSDU supported in
Unsigned16 octets which can be converted by the
source into max APDU size by taking into
account the TL, security, AL headers and
TMIC sizes
Type: This value is used for protecting argument
8 MIC
OctetString4 1 through 7 with Join key. This MIC value
is generated by the Security Manager. The
Advertisement router shall not overwrite
this value. See 7.4.4.3.3.2
Table 27 – SCO method for contract establishment, modification, or renewal
th
For Input Argument 16, 5 column, add “Valid range: –32 768 to 16”.
th
For Input Argument 17, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 13, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 14, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 24, 5 column, add “Valid range: –32 768 to 16”.
th
For Output Argument 25, 5 column, add “Valid range: –32 768 to 16”.

© IEC 2019
Table 30 – Contract_Data data structure
rd
For element 15, 3 column, add “Valid range: –32 768 to 16”.
rd
For element 16, 3 column, add “Valid range: –32 768 to 16”.
Table 31 – New_Device_Contract_Response data structure
rd
column, add “Valid range: –32 768 to 16”.
For element 3, 3
rd
For element 4, 3 column, add “Valid range: –32 768 to 16”.
7.3.2.6 Processing of received DPDUs
In step e), delete “Additionally, the procedure shall verify that the 8-bit MHR sequence
number is not 0xFF. If the 8-bit MHR sequence number is 0xFF, the procedure shall return
with a status of INVALID_SEQUENCE_NUMBER.”
7.3.3.9 Processing for received TPDUs
In step h), replace “may decrement” with “shall decrement”.
7.4.4.3.3.2 MIC generation for System_Manager_Join response
Replace the existing formula with the following:
[Output Argument number 1 . number 7 in Table 23
MACTag = HMAC-MMO
K_join
|| EUI- || Challenge ]
64join_device join_device
Table 62 – Security_Sym_Join_Request data structure
Replace the elements in Table 62 with the following:
New_Device_EUI64 1 Type: EUI64Address
Classification: Constant
Accessibility: Read only
DL_Subnet_ID 2 Type: Unsigned16
Classification: Static
Accessibility: Read/write
Comm_SW_Major_Version 3 Type: Unsigned8
Classification: Static
Accessibility: Read only
Comm_SW_Minor_Version 4 Type: Unsigned8
Classification: Static
Accessibility: Read only
128_Bit_Challenge_From_New_Device 5 Type: Unsigned128
Classification: Static
Accessibility: Read/write
Algorithm_Identifier 6 Type: Unsigned8
Classification: Static
Accessibility: Read only
Default value: 1
MIC 7 Type: Unsigned32
Classification: Static
Accessibility: Read only
– 6 – IEC 62734:2014/AMD1:2019
©
...