iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.

01.100.20 - Mechanical engineering drawings

ICS 01.100.20 Details

Mechanical engineering drawings

Technische Zeichnungen fur den Maschinenbau

Dessins de construction mécanique

Konstrukcijske risbe

General Information

Parent
01.100 - Technical drawings

e-Library Subscription

Create subscription and get permanent access to documents within 01.100.20 - Mechanical engineering drawings

Type
Monthly Subscription
for
seat
×
$ 115.53
$ 115.53

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
ISO
ISO 10110-16:2023(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces

This document provides general methods of describing surfaces adding a diffractive optical function on optical surfaces, such as planes, spheres, aspheres or general optical surfaces, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. The subject of this document is the presentation, description and dimensioning of diffractive surfaces in technical drawings. This document does not apply to diffractive surfaces with random surface texture, for example stochastic antireflective structures. Also not addressed by this document are all types of 3-dimensionally extended diffractive structures: Bragg gratings, volume holograms (HOE) and acousto-optic modulators. This document does not address the methods to test and qualify the specifications. This document does not address tools and methods for manufacturing diffractive surfaces.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
CEN
EN ISO 2692:2021(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
SIST EN ISO 2692:2021

This document defines the maximum material requirement (MMR), the least material requirement (LMR) and the reciprocity requirement (RPR). These requirements can only be applied to linear features of size of cylindrical type or two parallel opposite planes type.
These requirements are often used to control specific functions of workpieces where size and geometry are interdependent, for example to fulfil the functions “assembly of parts” (for MMR) or “minimum wall thickness” (for LMR). However, the MMR and LMR can also be used to fulfil other functional design requirements.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7083:2021(Main)
Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
SIST EN ISO 7083:2021

This document specifies the recommended proportions for the symbols used in technical product documentation. It gives recommended dimensions based on the grid related to the line width to be used.
This document does not apply to symbols used in process plant documentation, which are covered in ISO 81714-1.
The proportions of the symbols are based on the standard heights of lettering given in ISO 3098-1.

  • Standard
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6410-3:2021(Main)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
SIST EN ISO 6410-3:2021

This document establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in ISO 6410-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see ISO 6410-1), for example in assembly drawings.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2692:2021(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
EN ISO 2692:2021

This document defines the maximum material requirement (MMR), the least material requirement
(LMR) and the reciprocity requirement (RPR). These requirements can only be applied to linear
features of size of cylindrical type or two parallel opposite planes type.
These requirements are often used to control specific functions of workpieces where size and geometry
are interdependent, for example to fulfil the functions “assembly of parts” (for MMR) or “minimum wall
thickness” (for LMR). However, the MMR and LMR can also be used to fulfil other functional design
requirements.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 2692:2021(Main)
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

This document defines the maximum material requirement (MMR), the least material requirement (LMR) and the reciprocity requirement (RPR). These requirements can only be applied to linear features of size of cylindrical type or two parallel opposite planes type. These requirements are often used to control specific functions of workpieces where size and geometry are interdependent, for example to fulfil the functions “assembly of parts” (for MMR) or “minimum wall thickness” (for LMR). However, the MMR and LMR can also be used to fulfil other functional design requirements.

  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
ISO
ISO 7083:2021(Main)
Technical product documentation — Symbols used in technical product documentation — Proportions and dimensions

This document specifies the recommended proportions for the symbols used in technical product documentation. It gives recommended dimensions based on the grid related to the line width to be used. This document does not apply to symbols used in process plant documentation, which are covered in ISO 81714-1. The proportions of the symbols are based on the standard heights of lettering given in ISO 3098-1.

  • Standard
    101 pages
    English language
    sale 15% off
  • Standard
    106 pages
    French language
    sale 15% off
SIST
SIST EN ISO 6410-3:2021(Main)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:2021)
EN ISO 6410-3:2021

This document establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in ISO 6410-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see ISO 6410-1), for example in assembly drawings.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 6410-3:2021(Main)
Technical drawings — Screw threads and threaded parts — Part 3: Simplified representation

This document establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in ISO 6410-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see ISO 6410-1), for example in assembly drawings.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
CEN
EN ISO 6414:2020(Main)
Technical product documentation (TPD) - Technical drawings for glassware (ISO 6414:2020)
SIST EN ISO 6414:2020

This document establishes rules and conventions for particular use with technical drawings on glassware, for example, laboratory glassware or glassware used in other technical fields.
Optical parts are not, however, included herein.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13715:2019(Main)
Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
SIST EN ISO 13715:2019

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18388:2019(Main)
Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016)
SIST EN ISO 18388:2019

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE          The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10110-12:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces

This document specifies rules for presentation of aspheric surfaces and surfaces with low order symmetry such as cylinders and toroids in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. It also specifies sign conventions and coordinate systems. This document does not apply to off-axis aspheric and discontinuous surfaces such as Fresnel surfaces or gratings. NOTE For off-axis aspheric and non-symmetric surfaces, see ISO 10110-19. This document does not specify the method by which conformity with the specifications is tested.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 10110-8:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture

This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of polished optics. This document describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form. The control of the surface form specified in ISO 10110-5, ISO 10110-12, and ISO 10110-19 is not specified in this document.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
CEN
EN ISO 2553:2019(Main)
Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
SIST EN ISO 2553:2019

This document defines the rules to be applied for symbolic representation of welded joints on technical drawings. This can include information about the geometry, manufacture, quality and testing of the welds. The principles of this document can also be applied to soldered and brazed joints.
It is recognized that there are two different approaches in the global market to designate the arrow side and other side on drawings. In this document:
—          clauses, tables and figures which carry the suffix letter "A" are applicable only to the symbolic representation system based on a dual reference line;
—          clauses, tables and figures which carry the suffix letter "B" are applicable only to the symbolic representation system based on a single reference line;
—          clauses, tables and figures which do not have the suffix letter "A" or "B" are applicable to both systems.
The symbols shown in this document can be combined with other symbols used on technical drawings, for example to show surface finish requirements.
An alternative designation method is presented which can be used to represent welded joints on drawings by specifying essential design information such as weld dimensions, quality level, etc. The joint preparation and welding process(es) are then determined by the production unit in order to meet the specified requirements.
NOTE       Examples given in this document, including dimensions, are illustrative only and are intended to demonstrate the proper application of principles.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10110-1:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General

This document specifies the general layout of drawings and provides examples of indications in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document specifies the presentation in drawings of the characteristics, including the tolerances, of optical elements and systems. This document also includes the popular tabular format, formerly presented in ISO 10110‑10. This tabular format, now described in 5.1, is the preferred format for ISO 10110 drawings. Rules for preparation of technical drawings as well as for dimensioning and tolerancing are given in various ISO Standards. These general standards apply to optical elements and systems only if the necessary rules are not given in the various parts of ISO 10110.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    46 pages
    French language
    sale 15% off
  • Standard
    46 pages
    French language
    sale 15% off
SIST
SIST EN ISO 2553:2019(Main)
Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019)
EN ISO 2553:2019

This document defines the rules to be applied for symbolic representation of welded joints on technical
drawings. This can include information about the geometry, manufacture, quality and testing of the
welds. The principles of this document can also be applied to soldered and brazed joints.
It is recognized that there are two different approaches in the global market to designate the arrow side
and other side on drawings. In this document:
— clauses, tables and figures which carry the suffix letter "A" are applicable only to the symbolic
representation system based on a dual reference line;
— clauses, tables and figures which carry the suffix letter "B" are applicable only to the symbolic
representation system based on a single reference line;
— clauses, tables and figures which do not have the suffix letter "A" or "B" are applicable to both
systems.
The symbols shown in this document can be combined with other symbols used on technical drawings,
for example to show surface finish requirements.
An alternative designation method is presented which can be used to represent welded joints on
drawings by specifying essential design information such as weld dimensions, quality level, etc. The
joint preparation and welding process(es) are then determined by the production unit in order to meet
the specified requirements.
NOTE Examples given in this document, including dimensions, are illustrative only and are intended to
demonstrate the proper application of principles.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6413:2018(Main)
Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
SIST EN ISO 6413:2018

This document specifies the rules and graphical symbols for the representations of splines and serrations in technical product documentation.
Two methods of representation are specified:
a)    complete representation;
b)    simplified representation.
The rules and graphical symbols specified in this document are applicable to detail drawings of parts (shafts and hubs) and to assembly drawings of joints.
NOTE       For uniformity, all the figures in this document have been drawn in the first-angle orthographic projection. A third-angle orthographic projection could equally have been used without prejudice to principles established.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 2553:2019(Main)
Welding and allied processes — Symbolic representation on drawings — Welded joints

This document defines the rules to be applied for symbolic representation of welded joints on technical drawings. This can include information about the geometry, manufacture, quality and testing of the welds. The principles of this document can also be applied to soldered and brazed joints. It is recognized that there are two different approaches in the global market to designate the arrow side and other side on drawings. In this document: — clauses, tables and figures which carry the suffix letter "A" are applicable only to the symbolic representation system based on a dual reference line; — clauses, tables and figures which carry the suffix letter "B" are applicable only to the symbolic representation system based on a single reference line; — clauses, tables and figures which do not have the suffix letter "A" or "B" are applicable to both systems. The symbols shown in this document can be combined with other symbols used on technical drawings, for example to show surface finish requirements. An alternative designation method is presented which can be used to represent welded joints on drawings by specifying essential design information such as weld dimensions, quality level, etc. The joint preparation and welding process(es) are then determined by the production unit in order to meet the specified requirements. NOTE Examples given in this document, including dimensions, are illustrative only and are intended to demonstrate the proper application of principles.

  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
  • Standard
    57 pages
    French language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
CEN
EN ISO 5458:2018(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
SIST EN ISO 5458:2018

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zones are grouped together with location or orientation constraints, through the use of the CZ, CZR or SIM modifiers.
This document does not cover the use of the pattern specifications when the least and maximum material requirement is applied (see ISO 2692).
This document does not cover the establishment of common datum (see ISO 5459) based on pattern features.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10110-18:2018(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae

This document specifies the indication of tolerances for four categories of imperfections within optical materials — stress birefringence, bubbles and inclusions, homogeneity, and striae — in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Tolerances are applied either to a finished optical part, a finished system of optical parts, or to the raw material used to manufacture an optical part.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
SIST
SIST EN ISO 6413:2018(Main)
Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
EN ISO 6413:2018

This document specifies the rules and graphical symbols for the representations of splines and
serrations in technical product documentation.
Two methods of representation are specified:
a) complete representation;
b) simplified representation.
The rules and graphical symbols specified in this document are applicable to detail drawings of parts
(shafts and hubs) and to assembly drawings of joints.
NOTE For uniformity, all the figures in this document have been drawn in the first-angle orthographic
projection. A third-angle orthographic projection could equally have been used without prejudice to principles
established.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10110-14:2018(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefront with respect to a given reference surface is excluded from this document. There is no requirement that a tolerance for wavefront deformation is indicated.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 6413:2018(Main)
Technical product documentation — Representation of splines and serrations

This document specifies the rules and graphical symbols for the representations of splines and serrations in technical product documentation. Two methods of representation are specified: a) complete representation; b) simplified representation. The rules and graphical symbols specified in this document are applicable to detail drawings of parts (shafts and hubs) and to assembly drawings of joints. NOTE For uniformity, all the figures in this document have been drawn in the first-angle orthographic projection. A third-angle orthographic projection could equally have been used without prejudice to principles established.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
CEN
EN ISO 6412-3:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)
SIST EN ISO 6412-3:2018

ISO 6412-3:2017 specifies simplified representations used in technical drawings for terminal features of ventilation and drains in pipeline systems.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6412-1:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
SIST EN ISO 6412-1:2018

ISO 6412-1:2017 specifies rules and conventions for the execution of simplified drawings for the representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible).
ISO 6412-1:2017 is used whenever it is necessary to represent pipes or pipelines in a simplified manner.
For the purposes of this document, the figures illustrate the text only and should not be considered as design examples.
NOTE       This document can also be used for the representation of similar installations, such as ventilation or air-conditioning systems; in such cases, the term "duct", etc. is substituted for the term "pipe".

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6412-2:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)
SIST EN ISO 6412-2:2018

ISO 6412-2:2017 specifies supplementary rules, in addition to the general rules given in ISO 6412-1, applicable to isometric representation. Isometric representation is used where it is necessary to show the essential features clearly in three dimensions.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6412-1:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
EN ISO 6412-1:2018

This document specifies rules and conventions for the execution of simplified drawings for the
representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible).
It is used whenever it is necessary to represent pipes or pipelines in a simplified manner.
For the purposes of this document, the figures illustrate the text only and should not be considered as
design examples.
NOTE This document can also be used for the representation of similar installations, such as ventilation or
air-conditioning systems; in such cases, the term "duct", etc. is substituted for the term "pipe".

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6412-3:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)
EN ISO 6412-3:2018

This document specifies simplified representations used in technical drawings for terminal features of
ventilation and drains in pipeline systems.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6412-2:2018(Main)
Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)
EN ISO 6412-2:2018

This document specifies supplementary rules, in addition to the general rules given in ISO 6412-1,
applicable to isometric representation. Isometric representation is used where it is necessary to show
the essential features clearly in three dimensions.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1101:2017(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
SIST EN ISO 1101:2017

ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation.
It provides the foundation for geometrical specification.
The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs).
NOTE 1       Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing.
NOTE 2       This document gives rules for explicit and direct indications of geometrical specifications. Alternatively, the same specifications can be indicated indirectly in accordance with ISO 16792 by attaching them to a 3D CAD model. In this case, it is possible that some elements of the specification are available through a query function or other interrogation of information on the model instead of being indicated using visible annotation

  • Standard
    156 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    153 pages
    German language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10110-7:2017(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections

ISO 10110 (all parts) specifies the presentation of design and functional requirements for single optical elements and for optical assemblies in technical drawings used for their manufacture and inspection. ISO 10110-7:2017 specifies the indication of the level of acceptability of surface imperfections within a test region on individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches. The acceptance level for imperfections is specified, taking into account functional effects (affecting image formation or durability of the optical element), as well as cosmetic (appearance) effects. ISO 10110-7:2017 applies to transmitting and reflecting surfaces of finished optical elements, whether or not they are coated, and to optical assemblies. It allows permissible imperfections to be specified according to the area affected by imperfections, or alternatively by the visibility of imperfections, on components or in optical assemblies.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 13715:2017(Main)
Technical product documentation — Edges of undefined shape — Indication and dimensioning
SIST ISO 13715:2018

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified. In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off
SIST
SIST EN ISO 1101:2017(Main)
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
EN ISO 1101:2017

SIST EN ISO 1101 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs).

  • Standard
    156 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    153 pages
    German language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 1101:2017(Main)
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing. NOTE 2 This document gives rules for explicit and direct indications of geometrical specifications. Alternatively, the same specifications can be indicated indirectly in accordance with ISO 16792 by attaching them to a 3D CAD model. In this case, it is possible that some elements of the specification are available through a query function or other interrogation of information on the model instead of being indicated using visible annotation

  • Standard
    145 pages
    English language
    sale 15% off
  • Standard
    149 pages
    French language
    sale 15% off
ISO
ISO 1660:2017(Main)
Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing

ISO 1660:2017 gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    46 pages
    French language
    sale 15% off
CEN
EN ISO 3040:2016(Main)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
SIST EN ISO 3040:2016

ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1       For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applied to any type of cone within its scope.
NOTE 2       This International Standard is not intended to prevent the use of other methods of dimensioning and tolerancing.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 15787:2016(Main)
Technical product documentation — Heat-treated ferrous parts — Presentation and indications

ISO 15787:2016 specifies the manner of presenting and indicating the final condition of heat‐treated ferrous parts in technical drawings.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
ISO
ISO 10110-9:2016(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating

ISO 10110-9:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies rules for indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 10110-11:2016(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data

ISO 10110-11:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies the permissible deviations and material imperfections when these are not explicitly indicated.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
SIST
SIST EN ISO 3040:2016(Main)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
EN ISO 3040:2016

This International Standard specifies graphical indication applicable to a cone (right-angle circular
cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term “cone” relates to right-angle circular cones
only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However,
this International Standard can be applied to any type of cone within its scope.
NOTE 2 This International Standard is not intended to prevent the use of other methods of dimensioning and
tolerancing.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 3040:2016(Main)
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones

ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing. For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle). NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applied to any type of cone within its scope. NOTE 2 This International Standard is not intended to prevent the use of other methods of dimensioning and tolerancing.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 18388:2016(Main)
Technical product documentation (TPD) — Relief grooves — Types and dimensioning

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering. It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions. NOTE The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 10110-5:2015(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated. ISO 10110-5:2015 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 10110-6:2015(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances

ISO 10110-6:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-6:2015 specifies rules for indicating centring tolerances for optical elements, subassemblies, and assemblies. ISO 10110-6:2015 applies to plano surfaces, rotationally invariant surfaces, circular cylindrical, non-circular cylindrical, and non-symmetrical surfaces (general surfaces). General surfaces are described using ISO 10110‑19.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 10110-19:2015(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components

ISO 10110-19:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacture and inspection. ISO 10110-19:2015 provides a general method of describing surfaces and components. This part of ISO 10110 applies to continuous and discontinuous surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, ophthalmic glasses, and micro-optical surfaces. ISO 10110-19:2015 applies to any general surface or component, even including spherical or rotationally symmetric surfaces if it is necessary, i.e. when NURBS, splines, point clouds, etc. are used. ISO 10110-19:2015 does not specify the method by which compliance with the specifications is to be tested.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 17599:2015(Main)
Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products

ISO 17599:2015 specifies the requirements for the classification, composition, modelling, review, application, and management of digital mock-up. This International Standard for mechanical products is applicable to the building, management, review, and application of digital mock-up.

  • Standard
    25 pages
    English language
    sale 15% off
SIST
SIST EN ISO 10579:2014(Main)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
EN ISO 10579:2013

This International Standard gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10579:2013(Main)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
SIST EN ISO 10579:2014

ISO 10579:2010 gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 128-15:2013(Main)
Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings

ISO 128-15:2013 specifies the presentation of shipbuilding drawings for general use on metal hulls.

  • Standard
    12 pages
    English language
    sale 15% off
50