EN ISO 13715:2019
(Main)Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
Technical product documentation - Edges of undefined shape - Indication and dimensioning (ISO 13715:2017)
ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.
Technische Produktdokumentation - Kanten mit unbestimmter Gestalt - Angaben und Bemaßung (ISO 13715:2017)
Dieses Dokument legt Regeln für die Angaben und Bemaßung von Kanten mit unbestimmter Gestalt bei technischen Produkten und Maßangaben fest. Die Verhältnisse und Maße der zu verwendenden graphischen Symbole sind ebenfalls angegeben.
In Fällen, in denen die geometrisch definierte Form einer Kante (z. B. 1 × 45°) erforderlich ist, gelten die allgemeinen Grundsätze für die Angabe von Maßen nach ISO 129-1.
Documentation technique de produits - Arêtes de forme non définie - Indication et cotation (ISO 13715:2017)
ISO 13715:2017 spécifie les règles pour l'indication et la cotation d'arêtes de forme non définie dans la documentation technique de produits. Elle spécifie également les proportions et dimensions des symboles graphiques à utiliser.
Dans le cas où une forme d'arête définie dans sa géométrie est requise, (par exemple 1 x 45°), les principes généraux de cotation établis dans l'ISO 129‑1 s'appliquent.
Tehnična dokumentacija proizvodov - Robovi nedoločenih oblik - Oznake in kotiranje (ISO 13715:2017)
Ta dokument določa pravila za oznake in kotiranje nedoločenih robov tehničnega izdelka ter njegovih mer. Določa tudi razmerja in mere uporabljenih grafičnih simbolov. V primerih, ko je zahtevana geometrijsko določena oblika roba (na primer 1 × 45°), se uporabljajo splošna načela za dimenzioniranje, podana v standardu ISO 129-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13715:2019
01-december-2019
Nadomešča:
SIST ISO 13715:2018
Tehnična dokumentacija proizvodov - Robovi nedoločenih oblik - Oznake in
kotiranje (ISO 13715:2017)
Technical product documentation - Edges of undefined shape - Indication and
dimensioning (ISO 13715:2017)
Technische Produktdokumentation - Kanten mit unbestimmter Gestalt - Angaben und
Bemaßung (ISO 13715:2017)
Documentation technique de produits - Arêtes de forme non définie - Indication et
cotation (ISO 13715:2017)
Ta slovenski standard je istoveten z: EN ISO 13715:2019
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
SIST EN ISO 13715:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13715:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 13715:2019
EN ISO 13715
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 01.040.01; 01.100.20
English Version
Technical product documentation - Edges of undefined
shape - Indication and dimensioning (ISO 13715:2017)
Documentation technique de produits - Arêtes de Technische Produktdokumentation - Kanten mit
forme non définie - Indication et cotation (ISO unbestimmter Gestalt - Angaben und Bemaßung (ISO
13715:2017) 13715:2017)
This European Standard was approved by CEN on 5 August 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13715:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13715:2019
EN ISO 13715:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13715:2019
EN ISO 13715:2019 (E)
European foreword
The text of ISO 13715:2017 has been prepared by Technical Committee ISO/TC 10 "Technical product
documentation” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 13715:2019 by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13715:2017 has been approved by CEN as EN ISO 13715:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13715:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 13715:2019
INTERNATIONAL ISO
STANDARD 13715
Third edition
2017-03
Technical product documentation —
Edges of undefined shape —
Indication and dimensioning
Documentation technique de produits — Arêtes de forme non
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.