EN 14503:2003
(Main)Inland navigation vessels - Harbours for inland navigation
Inland navigation vessels - Harbours for inland navigation
This standard applies to harbours for inland navigation.
It does not apply to
- harbours for recreational craft
- ferry terminals or
- landing stages for passenger ships.
Fahrzeuge der Binnenschifffahrt - Häfen für die Binnenschifffahrt
Bateaux de navigation intérieure - Ports pour la navigation intérieure
Plovila za celinske vode – Pristanišča za plovbo po celinskih vodah
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DKFahrzeuge der Binnenschifffahrt - Häfen für die BinnenschifffahrtBateaux de navigation intérieure - Ports pour la navigation intérieureInland navigation vessels - Harbours for inland navigation93.140SULVWDQLãþConstruction of waterways and ports4
...
This May Also Interest You
This document specifies safety requirements for floating landing stages and floating bridges for use by passengers and crew.
Requirements for facilities for supply and waste disposals are not covered by this document.
This document is not applicable to:
- floating landing stages for motor vehicle traffic;
- floating landing stages for recreational craft and inland navigation craft that are not vessels, e.g. floating equipment;
- more severe requirements for floating landing stages used for the transhipment of dangerous goods;
- any gangway required between vessel and floating landing stage;
- specialized floating structures which are not used for passenger traffic or the berthing of vessels;
- floating landing stages and bridges with equipment for cargo handling.
- Draft29 pagesEnglish languagesale 10% offe-Library read for×1 day
This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port.
Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection.
Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection.
Annex C contains information concerning the dimensioning of shore-based connecting cables.
The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements for floating landing stages and floating bridges for use by passengers and crew.
Requirements for facilities for supply and waste disposals are not covered by this document.
This document is not applicable to:
- floating landing stages for motor vehicle traffic;
- floating landing stages for recreational craft and inland navigation craft that are not vessels, e.g. floating equipment;
- more severe requirements for floating landing stages used for the transhipment of dangerous goods;
- any gangway required between vessel and floating landing stage;
- specialized floating structures which are not used for passenger traffic or the berthing of vessels;
- floating landing stages and bridges with equipment for cargo handling.
- Draft29 pagesEnglish languagesale 10% offe-Library read for×1 day
This document provides guidance on the collation of the measurements required for the management of siltation at river structures. These include structures used by water supply utilities, other major water abstractors, HEP producers, and for flow measurement by environmental protection agencies.
The document is also intended for use when a redundant structure is being removed, or when modifications to a structure are being made to facilitate fish migration or for river restoration. This is to ensure that the impacts of these changes are adequately monitored and recorded.
The document covers the provision of routine measurements, and the checks and requirements that need to be made by the operator so that specific basic information is collated and made readily available. This information is used to inform decision-making by environment management agencies that authorise flushing, sediment clearance or sedimentation removal. This is to ensure minimal environmental impacts, and to compliance with existing environmental legislation.
- Technical specification16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 07-May-2024
- 17.120.20
- 93.140
- CEN/TC 318
This document applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
This document specifies additional requirements for the on-shore unit of the electrical shore connection.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard specifies requirements relating to electrical installations for the supply of electrical power (three-phase AC - 400 V, 50 Hz and with a rated current of at least 250 A) to vessels in port.
Annex A stipulates general and safety requirements relating to the shore-based section of the electrical shore connection.
Annex B stipulates general and safety requirements relating to the shore-based connecting cables and to the on-board section of the electrical shore connection.
Annex C contains information concerning the dimensioning of shore-based connecting cables.
The requirements according to the HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
This Technical Specification gives guidance for dealing with the production and control of sludge in relation to inputs and treatment and gives a strategic evaluation of recovery, recycling and disposal options for sludge according to its properties and the availability of outlets.
This Technical Specification is applicable for sludges from:
- storm water handling;
- night soil;
- urban wastewater collecting systems;
- urban wastewater treatment plants;
- treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EC [1]);
- water supply treatment plants;
but excluding hazardous sludges from industry.
- Technical specification23 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-Jul-2013
- 77.060
- 93.140
- CEN/TC 308
ISO 13174:2012 defines the means to be used to ensure that cathodic protection is efficiently applied to the immersed and driven/buried metallic external surfaces of steel port, harbour, coastal and flood defence installations and appurtenances in seawater and saline mud to provide protection from corrosion.
ISO 13174:2012 specifies cathodic protection of fixed and floating port and harbour structures. This includes piers, jetties, dolphins (mooring and berthing), sheet or tubular piling, pontoons, buoys, floating docks, lock and sluice gates. It also specifies cathodic protection of the submerged areas of appurtenances, such as chains attached to the structure, when these are not electrically isolated from the structure.
ISO 13174:2012 is to be used in respect of cathodic protection systems where the anodes are exposed to water or saline mud. For buried areas, typically in soil or sand filled areas behind piled walls or within filled caissons, which may be significantly affected by corrosion, specific cathodic protection design and operation requirements are defined in EN 12954, the anodes being exposed to soils.
ISO 13174:2012 does not cover the cathodic protection of fixed or floating offshore structures (including offshore loading buoys), submarine pipelines or ships.
ISO 13174:2012 does not include the internal protection of surfaces of any components such as ballast tanks, internals of floating structures flooded compartments of lock and sluice gates or the internals of tubular steel piles.
ISO 13174:2012 covers the cathodic protection of structures fabricated principally from bare or coated carbon and carbon manganese steels.
As some parts of the structure may be made of metallic materials other than carbon steels, the cathodic protection system should be designed to ensure that there is a complete control over any galvanic coupling and minimize risks due to hydrogen embrittlement or hydrogen-induced cracking (see ISO 12473 ).
ISO 13174:2012 does not address steel reinforced concrete structures (see EN 12696).
ISO 13174:2012 is applicable to the whole submerged zone in seawater, brackish waters and saline mud and related buried areas which can normally be found in port, harbour, coastal and flood defence installations wherever these structures are fixed or floating.
For surfaces which are alternately immersed and exposed to the atmosphere, the cathodic protection is only effective when the immersion time is long enough for the steel to become polarized. Typically, effective cathodic protection is achieved for all surfaces below mid tide.
For structures such as sheet steel and tubular steel piles that are driven into the sea bed or those that are partially buried or covered in mud, ISO 13174:2012 is also applicable to the surfaces buried, driven and exposed to mud which are intended to receive cathodic protection along with surfaces immersed in water.
Cathodic protection may also be applied to the rear faces of sheet steel piled walls and the internal surfaces of filled caissons. Cathodic protection of such surfaces is specified by EN 12954.
- Standard40 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Dec-2012
- 29-Jun-2013
- 47.020.99
- 77.060
- 93.140
- CEN/TC 219
This document specifies a test method for determining the fire resistance of smoke extraction ducts. It is applicable only to smoke extraction ducts that pass through another fire compartment apart from the compartment from where smoke needs to be extracted in case of fire. It represents fire exposure of a fully developed fire.
This method of test is only applicable to fire resistant ventilation ducts (same construction) with the following classification according to EN 13501-3:
- fire from inside and outside i ↔ o;
- applicable to a pressure difference up to 500 Pa in fire conditions;
NOTE 1 It is assumed that the duct A test(s) in accordance with EN 1366-1 has been performed with an under-pressure of minimum 500 Pa.
- with integrity (E) and insulation (I) criteria equal to or higher than the intended classification for the smoke extraction duct.
For the purposes of the test described in this document, the duct is referred to as duct C.
This test method has been designed to cover both vertical and horizontal smoke extraction ducts. A vertical system need not be evaluated to this method provided that:
- both horizontal (ho) and vertical (ve) classification according to EN 13501-3 has been obtained for the ventilation duct;
- it has been tested in a horizontal orientation to this method.
If the ventilation duct in practise is only used for vertical applications in smoke extraction systems, only vertical (ve) classification is obtained in accordance with EN 13501-3 and tested only in a vertical orientation to this test method.
This test method is suitable for ducts constructed from non-combustible materials (class A1 and A2-s1, d0 according to EN 13501-1).
NOTE 2 Reaction with components of the duct can affect the oxygen concentration inside the duct leading to inaccurate calculation of the leakage rate. If it is determined this has happened refer to Annex D.
This document applies to four sided rectangular and circular ducts only (with fire exposure on all sides). Ducts that utilize elements of construction for one, two or three sides are not covered. An alternative test method for one, two and three sided ducts will be developed separately.
- Draft50 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Oct-2024
- 13.220.20
- 13.220.50
- 305/2011
- M/117
- CEN/TC 127
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.