87.060 - Paint ingredients
ICS 87.060 Details
Paint ingredients
Beschichtungsstoffkomponenten
Ingredients des peintures
Sestavine barv
General Information
Frequently Asked Questions
ICS 87.060 is a classification code in the International Classification for Standards (ICS) system. It covers "Paint ingredients". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1613 standards classified under ICS 87.060 (Paint ingredients). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 87.060 - Paint ingredients
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document provides general test methods for polyisocyanate resins and solutions of polyisocyanate resins intended for use as binders in paints, varnishes and related products.
- Draft10 pagesEnglish languagee-Library read for1 day
This document provides general test methods for polyisocyanate resins and solutions of polyisocyanate resins intended for use as binders in paints, varnishes and related products.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document specifies an instrumental method for determining the turbidity of clear liquids. It is applicable to resins and resin solutions, solvents, clear coating materials, monomers and any other liquids where clarity is specified.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding test methods for nanoscale diamond as a functional additive in polymer composites.
- Standard8 pagesEnglish languagesale 15% off
This document specifies an instrumental method for determining the turbidity of clear liquids. It is applicable to resins and resin solutions, solvents, clear coating materials, monomers and any other liquids where clarity is specified.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies an instrumental method for determining the turbidity of clear liquids. It is applicable to resins and resin solutions, solvents, clear coating materials, monomers and any other liquids where clarity is specified.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations.
NOTE Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot “sustain combustion” at some specified temperature(s).
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations. NOTE Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot “sustain combustion” at some specified temperature(s). The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards. This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.
- Standard11 pagesEnglish languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
- Standard14 pagesFrench languagesale 15% off
This document specifies general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document specifies sample preparation methods to determine the size distribution of separate particles of a single pigment or extender, which is dispersed in a liquid by application of a standardized dispersion procedure, using an ultrasonic device, shaker device or wet jet mill.
The sample preparation methods described are optimized for measurements carried out with a particle sizing technique based on sedimentation. This technique relies on particle migration due to gravitation or centrifugal forces and requires a density contrast between the particles and the liquid phase.
- Standard29 pagesEnglish languagee-Library read for1 day
This document gives information on an interlaboratory comparison for the determination of the yield point, using rheological test methods. The yield point is the shear stress τ below which a material does not flow.
This document provides examples of fields of applications, in which important material properties are characterized with the aid of the yield point. These fields of application include:
— effectiveness of rheological additives;
— shelf life (e.g. with regard to sedimentation, separation and flocculation);
— stability of the structure at rest;
— behaviour when starting to pump;
— use in scraper systems;
— wet-film thickness;
— levelling and sagging behaviour (e.g. without brushmarks or sag formation);
— orientation of effect pigments.
- Technical report24 pagesEnglish languagee-Library read for1 day
This document gives information on an interlaboratory comparison for the determination of the yield point, using rheological test methods. The yield point is the shear stress τ below which a material does not flow.
This document provides examples of fields of applications, in which important material properties are characterized with the aid of the yield point. These fields of application include:
— effectiveness of rheological additives;
— shelf life (e.g. with regard to sedimentation, separation and flocculation);
— stability of the structure at rest;
— behaviour when starting to pump;
— use in scraper systems;
— wet-film thickness;
— levelling and sagging behaviour (e.g. without brushmarks or sag formation);
— orientation of effect pigments.
- Technical report24 pagesEnglish languagee-Library read for1 day
This document specifies sample preparation methods to determine the size distribution of separate particles of a single pigment or extender, which is dispersed in a liquid by application of a standardized dispersion procedure, using an ultrasonic device, shaker device or wet jet mill.
The sample preparation methods described are optimized for measurements carried out with a particle sizing technique based on sedimentation. This technique relies on particle migration due to gravitation or centrifugal forces and requires a density contrast between the particles and the liquid phase.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and corresponding test methods for zinc dust pigments suitable for use in protective coatings.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and corresponding test methods for zinc dust pigments suitable for use in protective coatings.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and corresponding test methods for zinc dust pigments suitable for use in protective coatings.
- Standard21 pagesEnglish languagesale 15% off
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies a formalism for the calculation of the illuminant metamerism of solid surface colours. It cannot be applied to colours of effect coatings without metrical adaptation.
This document only covers the phenomenon of metamerism for change of illuminant, which has the greatest meaning in practical application. In the case where chromaticity coordinates of a pair of samples under reference conditions do not exactly match, this document gives guidance on which correction measures to take. Regarding the reproduction of colours, the metamerism index is used as a measure of quality in order to specify tolerances for colour differences between a colour sample and a colour match under different illumination conditions.
The quantification of the illuminant metamerism of pairs of samples is formally performed by a colour difference assessment, for which tolerances that are common for the evaluation of residual colour differences can be used.
NOTE In the colorimetric literature and textbooks, the term geometric metamerism is sometimes used for the case where two colours appear to be the same under a specific geometry for visual assessment and selected standard observer and standard illuminant pair, but are perceived as two different colours at changed observation geometry. The term geometric metamerism is different to metamerism described in this document.
- Standard32 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for precipitated calcium silicate.
- Standard18 pagesSlovenian languagee-Library read for1 day
- Draft15 pagesEnglish languagee-Library read for1 day
This document specifies a formalism for the calculation of the illuminant metamerism of solid surface colours. It cannot be applied to colours of effect coatings without metrical adaptation.
This document only covers the phenomenon of metamerism for change of illuminant, which has the greatest meaning in practical application. In the case where chromaticity coordinates of a pair of samples under reference conditions do not exactly match, this document gives guidance on which correction measures to take. Regarding the reproduction of colours, the metamerism index is used as a measure of quality in order to specify tolerances for colour differences between a colour sample and a colour match under different illumination conditions.
The quantification of the illuminant metamerism of pairs of samples is formally performed by a colour difference assessment, for which tolerances that are common for the evaluation of residual colour differences can be used.
NOTE In the colorimetric literature and textbooks, the term geometric metamerism is sometimes used for the case where two colours appear to be the same under a specific geometry for visual assessment and selected standard observer and standard illuminant pair, but are perceived as two different colours at changed observation geometry. The term geometric metamerism is different to metamerism described in this document.
- Standard32 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for precipitated calcium silicate.
- Standard18 pagesSlovenian languagee-Library read for1 day
- Draft15 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies requirements and corresponding methods of test for precipitated calcium silicate.
- Standard11 pagesEnglish languagesale 15% off
- Standard24 pagesFrench languagesale 15% off
This document specifies a formalism for the calculation of the illuminant metamerism of solid surface colours. It cannot be applied to colours of effect coatings without metrical adaptation. This document only covers the phenomenon of metamerism for change of illuminant, which has the greatest meaning in practical application. In the case where chromaticity coordinates of a pair of samples under reference conditions do not exactly match, this document gives guidance on which correction measures to take. Regarding the reproduction of colours, the metamerism index is used as a measure of quality in order to specify tolerances for colour differences between a colour sample and a colour match under different illumination conditions. The quantification of the illuminant metamerism of pairs of samples is formally performed by a colour difference assessment, for which tolerances that are common for the evaluation of residual colour differences can be used. NOTE In the colorimetric literature and textbooks, the term geometric metamerism is sometimes used for the case where two colours appear to be the same under a specific geometry for visual assessment and selected standard observer and standard illuminant pair, but are perceived as two different colours at changed observation geometry. The term geometric metamerism is different to metamerism described in this document.
- Standard24 pagesEnglish languagesale 15% off
- Standard24 pagesFrench languagesale 15% off
SIGNIFICANCE AND USE
3.1 This guide defines the shelf life of carbon black when stored under proper conditions.
SCOPE
1.1 This guide defines the shelf life of carbon black.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide2 pagesEnglish languagesale 15% off
- Guide2 pagesEnglish languagesale 15% off
This document specifies sample preparation methods to determine the size distribution of separate particles of a single pigment or extender, which is dispersed in a liquid by application of a standardized dispersion procedure, using an ultrasonic device, shaker device or wet jet mill. The sample preparation methods described are optimized for measurements carried out with a particle sizing technique based on sedimentation. This technique relies on particle migration due to gravitation or centrifugal forces and requires a density contrast between the particles and the liquid phase.
- Standard22 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
SIGNIFICANCE AND USE
5.1 Earlier methods for characterizing turpentine and related terpene products were based on physical properties, such as those in Specification D13 and Test Methods D801 and D802, and packed column gas chromatography for the major constituents (for example, α-pinene, β-pinene) as in Test Method D3009. As terpene products became widely used as chemical raw material, the separation and quantitation of compounds present at lower concentrations in the product became more important. The capillary gas chromatographic technique described in these test methods is a rapid and convenient means to perform these analyses.
SCOPE
1.1 These test methods describe the determination of the amounts of α-pinene, β-pinene, dipentene, terpene alcohols, and other terpene compounds in turpentine and related terpene products using capillary gas chromatography. The two methods for determining the amount of the individual terpene compounds are the “internal standard” method, which yields absolute values, and the “area percent” method, which yields relative values.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: Overall this test method gives excellent repeatability but only moderate reproducibility. This greater than normal differential is a consequence of the variety of gas chromatography (GC) columns and other variables used by participants. These variables, coupled with the complex composition of the test products, enabled some workers to separate peaks that others reported as one peak; thus, this test method gives excellent precision within a given laboratory on a given GC. When laboratory to laboratory comparison have to be made, however, it is essential that the GC operating conditions be defined closely.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard5 pagesEnglish languagesale 15% off
This document specifies requirements and corresponding methods of test for cristobalite.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for dolomite.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for precipitated sodium aluminium silicate.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for calcined clay.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for whiting.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for blanc fixe.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application.
NOTE Such modification can be surface treatment, coating, doping and combination thereof.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.
- Standard33 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for natural crystalline calcium carbonate.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for baryte (natural barium sulfate).
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for muscovite-type mica.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and corresponding test methods for vacuum metallized aluminium pigments (VMP) suitable for use in paints and printing ink industries.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for silica sand (unground natural quartz).
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies requirements and corresponding methods of test for precipitated sodium aluminium silicate.
- Standard19 pagesEnglish languagee-Library read for1 day
SIGNIFICANCE AND USE
4.1 Solvents that have been depleted in stabilizer content can become acidic. Acids can cause corrosion to process and storage equipment used for halogenated solvents.
4.2 Halogenated organic solvents may contain amine type (alkaline, aqueous extractable) acid accepting additives, neutral type (typically epoxide) acid accepting additives or both. This test method can determine the combined acid acceptance from both types of stabilizers. In addition, if the amine acid acceptance is determined by a separate procedure (see Test Methods D2106), the amount of neutral acid accepting stabilizers in a solvent can be calculated from the difference between combined and amine acid acceptance values.
4.3 This test method may be used by producers and users to verify that a product is complying with acid acceptance product specifications or by users to monitor the acid accepting ability of a solvent in use.
SCOPE
1.1 This test method covers the determination of the total acid acceptance including amine and neutral type (alpha epoxide) stabilizers in halogenated organic solvents.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard3 pagesEnglish languagesale 15% off
This document specifies a method for determining the boiling range of liquids that boil between 30 °C and 300 °C at normal pressure, and that are chemically stable and do not corrode the apparatus during the distillation. The method is applicable to organic liquids such as hydrocarbons, esters, alcohols, ketones, ethers and similar products. NOTE 1 The method differs from that described in ISO 918 with respect to the volume of the distillation flask, the type of cooler and the distillation receiver. NOTE 2 The method differs from that specified in ISO 3405 with respect to the volume of the distillation flask and the diameter of the hole in the flask support.
- Standard21 pagesEnglish languagesale 15% off