87.060.30 - Solvents

This European Standard sets requirements for bio-based solvents in terms of properties, limits, application classes and test methods. It lays down the characteristics and details for assessment of bio-based solvents:
-   fit for purpose in terms of performance related properties;
-   that comply with the requirements regarding the health, safety and environment which apply to general solvents; and
-   that are derived from a certain minimum percentage of biomass.
NOTE   EN 16575 defines the term "bi...view more

This European Standard sets the requirements for bio-based solvents in terms of their bio-based content, their technical properties and test methods. It lays down the characteristics and details for assessment of bio-based solvents that:
-   are fit for purpose in terms of performance related properties;
-   comply with the health, safety and environmental requirements which apply generally to solvents; and
-   are derived from biomass.
This European Standard specifies solvent classes, based on th...view more

This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all
kinds and in all forms, except loose fibre, to the combined action of rubbing and of organic solvents
used in spot-cleaning, localized “spotting” carried out by hand.

This International Standard specifies two methods for determining the solubility of dyestuffs in organic solvents. They are applicable to dyestuffs that do not change chemically under the influence of the solvent and are stable and non-volatile under the specified drying conditions. For volatile solvents (boiling point < 120 °C), the gravimetric procedure is recommended and, for less volatile solvents (boiling point > 120 °C), the photometric procedure is recommended. The choice of procedure sho...view more

The test is carried out by the following procedure: drying of the sample in the oven at (105 2) °C, passing the dried sample through the sieve and transferring it of the graduated measuring cylinder, but so that no air pockets are formed. Weighing of the cylinder and of the sample. Placing of the cylinder in the tamping volumeter and tamping it in steps of approximately 1250 revolutions until the difference between two successive steps of tamping is less than 2 ml. Calculation of results. - Canc...view more

This document specifies the properties and requirements for demineralized water used as solvent for paints and varnishes industrial applications, e.g. production of electro-deposition coating materials, water-based coating materials, water-based resins and plastics dispersions.
This document is not applicable to water for analytical use.
NOTE See ISO 3696.